Instruction/ maintenance manual of the product CT-5060 Autostart
Go to page of 10
DOC .3.55 CA – September 9, 2004 Manufactured in Canada by Autostart MANUAL TRANSMISSION MULTI-CHANNEL REMOTE STARTER AND FUL L-FEATUR ED ALAR M SYSTEM CT-5060 User Guide Introduction ......................................... 1 Basic Remote Operation.
Note: Pressing the LOCK and UNLOCK buttons a t the same time will activa te the AUX 2 output. Remote-starting Your Vehicle Remote-starting Press the START/STOP button for approx. 1 second. The parking lights will come ON , informing you that the unit has received your signa l.
P. 3 User Guide CT-5060 • Door opened; • Hood opened; • Brakes pressed; • Parking Brake disengaged; • Key turned to the IGNITION ON (RUN) position. Should any of the above occur, Ready Mode will be cancelled. Note: The unit will notify the user that it has exited Ready Mode by giving three slow flashes of the vehicle’s Parking Lights.
CT-5060 User Guide P. 4 Valet Mode The system can be placed in Val et Mode to disab le the remote starting capabil ities. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from being remote-started accidentally.
P. 5 User Guide CT-5060 In an emergency situation, you can activate Pan ic Mode using the LOCK or UNLOCK button. This will: • Shut down the engine, • Unlock the doors (if UNLOCK is pressed) • Or lock the door (if LOCK is pressed), • Disarm the Starter Kill and • Activate the siren for 1 minute.
CT-5060 User Guide P. 6 Priority Door Access This safety feature lets you unlock only the driver’s door when you press the UNLOCK button on the transmitter, and then UNLOCK the rest of the vehicle doors if the UNLOCK button is pressed for a second time within 3 seconds.
P. 7 User Guide CT-5060 Passive or Active Arming By default, the system is configured to Passive Arming Mode . In Passive Arming Mode, the Starter Kill and the Alarm will automatically arm 30 seconds after the last door is closed. The system will not arm itself if a door is left open.
CT-5060 User Guide P. 8 Ignition Re-Lock When the Ignition-Controlled Door Locks option is enabled and the ignition is ON , should any door be unlocked and opened, all the doors will be re-locked next time the brake pedal is pressed. Secure Lock This is an added security feature.
Car Finder When enabled, the Car Finder option will help you locate your vehicle by sen ding a pulsating signal through the horn or the siren. To hear the signal, press the LOCK and UNLOCK buttons simultaneously. This will produce a pulsating signal for the time you keep the buttons pressed.
CT-5060 User Guide P. 10 3 • Entering Cold Weather Mode • Exit Ready Mode • Enter Remote Valet • Enter ignition valet 4 • +12 volts detected on the Brake line; cranking cancelled • Enterin.
An important point after buying a device Autostart CT-5060 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart CT-5060 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart CT-5060 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart CT-5060 you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart CT-5060 will certainly help you make a decision on the purchase.
If you already are a holder of Autostart CT-5060, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart CT-5060.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart CT-5060. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart CT-5060 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
