Instruction/ maintenance manual of the product CT-1010 Autostart
Go to page of 8
Keyless Entry And Alarm System Notice The manufacturer will accept no responsibility for any electrical damage resulting from improper installation of the product, be that either damage to the vehicle itself or to the Unit. This Unit must be installed by a certified technician using all safety devices supplied.
P. 2 Installation Guide Alarm-050 The following is a list of co mponents included in the kit: o 1 – Control unit. o 2- CT-200 transmitters o 1 – plug-in L.E.D o 1 – Hood-pin switch o 1 – plug-in valet button. o 1 – user guide o 1 – installation g uide.
Installation Guide P. 3 4. Relock • If you unlock the doors wit h the remote transmitter, but do not open any door or t runk within 60 seconds, the doors will automatically relock.
P. 4 Installation Guide 0 3 PIN CONNECTOR – 2 WIRE HARNESS Wire Wire colour Function Description 1 GREEN (–) Unlock output Programmable 500mA negative out put: 1/10-sec.
Installation Guide P. 5 After selecting the function, press one of the corresponding bu ttons to select the option. for Option 1, for Option 2, for Option 3; for Option 4; + for Option 5.
P. 6 Installation Guide 0 MODE 2 * INDICATES DEF AULT SETTIN G FUNCTION 1 – Re-lock OPTION 1 Disabled OPTION 2* Enabled – Relock all doors 60 secon ds after unlocking and no door nor trunk is open.
Installation Guide P. 7 Note : As a rule, you will hear only one short chirp for each adjustment of the horn chir p duration. Ne vertheless, you will hear a long chirp (approx. 1 second long) if either the minimum value (10 ms) or maximum value (250 ms) is reached.
P. 8 Installation Guide 0 Diagnostics - Parking Lights Flash Rate FLASHES RATE DESCRIPTION 1 Quick • Locked by transmitter, syste m armed (starter kill, alarm) 2 Quick • Unlocked by transmitter, s.
An important point after buying a device Autostart CT-1010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart CT-1010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart CT-1010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart CT-1010 you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart CT-1010 will certainly help you make a decision on the purchase.
If you already are a holder of Autostart CT-1010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart CT-1010.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart CT-1010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart CT-1010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
