Instruction/ maintenance manual of the product AS-1221 Autostart
Go to page of 7
DOC.1.00 DL Lp November 16, 2006 Manufactured in Canada by Autostart AUTOMATIC TRANSMISSI ON MULTI-CHANNEL REMOTE STARTER SYSTEM AS-1221 / AS-1222 User Guide WARNING It is the responsibility of t he vehicle operator to ensure their vehicle is parked in a safe and responsible manner.
P. 2 User Guide Table of contents Introduction ....................................................... 2 Vehicle Presets ................................................. 2 Heater and Heated Seat ............................... 2 Windshield Wipers, Radio a nd Headlights .
User Guide P. 3 Remote-starting Your Vehicle Remote-starting Press the Ι button for approx. 1 second. The parking lights will come on, informing you that the unit has received your signal. Approx. 5 se conds later, the engine will start. The parking lights will remain on during t he pre-programmed run time.
P. 4 User Guide To EXIT Valet Mode 1. With the key in the Ignition switch, turn the key to the ON (RUN/IGNITION) and then OFF positions 5 times within 10 seconds. 2. The Parking Light will flash twice indicating the Module is now out of Valet Mode. The LED will turn OFF .
User Guide P. 5 Advanced Features: Installation-programmable options The system was designed with flexibility and OEM in tegration in mind. With its programmable options, this unit can control nearly any el ectrical system in your vehicle. Note: The programming of these features shoul d be left to a professional.
P. 6 User Guide To keep your vehicle protected when the factory security system is disarmed for a remote start, Secure Lock will relock your doors as soon as the vehicle has started. Once the engine run cycle ends, Secure Lock w ill rearm your factory security system.
User Guide P. 7 LIMITED LIFETIME WARRANTY REMOTE STARTERS: As the manufacturer, 160031 Canada Inc. (“Autostart”) warrants to the original consum er purchaser only ( non-transferable ) that the rem.
An important point after buying a device Autostart AS-1221 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart AS-1221 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart AS-1221 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart AS-1221 you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart AS-1221 will certainly help you make a decision on the purchase.
If you already are a holder of Autostart AS-1221, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart AS-1221.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart AS-1221. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart AS-1221 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
