Instruction/ maintenance manual of the product RS-725LCD Autopage
Go to page of 24
1 RS - 725 LCD PROFESSIONAL REMOTE CAR STARTER WITH ALARM SYSTEM & 2 - WAY LCD COMMUNICATION OPERATION MANUAL THIS PRODUCT IS DESIGNED FOR PROFESIONAL INSTALLATION ONLY.
2 TABLE OF CONTENTS: LCD REMOTE TRANSMITTER : A BATTERY REPLACEMENT 5 B THE REMOTE LCD ICONS WITH FUNCTION 6 C PROGR AMMING OF THE LCD REMOTE TRANSMITTER 1. Screen Lamp ON 2. Power Save Mode 3. Clear The Flash Icon and Melody Sound 4. Stop The Melody Sound.
3 Noise Abatement Circuit 15 O ANTI CAR - JACKING Active Anti Car Jacking Passive Anti Car Jacking Trigger The Anti Car Jacking Mode Override The Syst em To Turn Off Anti Car Jacking 16 16 16 16 16 P .
4 TRANSMITTERS The RS725 comes with two transmitters. The XT72LCD is a 2 - way transmitter and receiver, also referred to as a transceiver. The XT - 33 is a mini - size 1 - way transmitter.
5 WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control.
6 B. THE REMOTE LCD ICONS WITH FUNCTION: Door Lock Your vehicle doors are locked Door Unlock Your vehicle doors are unlocked and the system is Disarmed Armed Mode Your vehicle is in armed mode Valet Mode All the function shall be temporarily on hold.
7 C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER: Transmitter Button Description Operation (1 second) LCD screen lamp turns on for 5 seconds. Press and hold for 1 second 1 melody sound to confirm en ters. ( 3 seconds) Timer Programming Mode. Press and hold for 3 seconds 2 - melody sounds to confirm enter.
8 6. Vibration / Melody Mode: This is useful when you are in a noisy place and it is difficult to hear the beep sound from the remote control. In this mode, the remote control vibrates itself if your security system is triggered.
9 D. CLOCK & TIMER SETTING: Transmitter Button Descripti on Press Transmitter Button 1 Press & Hold button for 3 seconds Clock Setting (Hour) *Flash digit for adjusting for – and for + Press button once Time setting (Minute) *Flash digit for adjusting for – and for + 2 Press button once.
10 3. Count Down Timer Setting: Example - Set the countdown timer at 2:30 1. Press & hold the button for 3 seconds, two - melodies will sound and the “Hours” digit will flash for adjustment. 2. Press the button 5 times, the LCD screen will show the icon and the “Hours” digit flashes for adjustment.
11 - Passive Arming By - pass While the system Disarmed. Activate or Turn Off The Remote Sta rt Press twice within 3 seconds. + Channel # 4 Timer Output ( 4 ) Optional II Switching code For 2nd Car Operation .
12 4. Passive Starter Disable Fast Flash Disable 5. Panic Alarming Flashes Flashes 6. Car - Jacking Alarming Flashes Disable Flashes 7. Car Locator 6 Chirps 12 Flashes Locking G. ACTIVE ARMING – LOCK & ARM: 1. Press button on the transmitter. 2.
13 by - pass, press the transmitter or button s and the system will return to normal status. I. ACTIVE DISARMING – UNLOCK & DISARM: 1. Press button on the transmitter. 2. The siren will chirp twice and the parking lights will flash twice indicating that the security system is now disarmed.
14 4. Within 15 seconds, enter your chosen second digit code by pressing and releasing the Valet Switch. 5. Turn the ignition switch “OFF” position. 4 Chirps f rom siren/horn and 3 flashes from the parking lights will indicate the system has disarmed.
15 2. During panic mode, the normal function of this transmitter button will be disabled. The transmitter and buttons can be used to lock and unlock the door (if the option is installed), however once the button is pressed, the vehicle’s starter disable device, (where installed) will be disengaged allowing the vehicle to start.
16 O. ANTI CAR - JACKING Warning: If you don't need the car jacking function in this alarm system, be sure to set car jacking feature “OFF”. T his system is default setting all car jacking “OFF”. ACTIVE ANTI CAR JACKING: 1. Press and hold the transmitter and button s at the same time for 2 seconds while the vehicle’s ignition is ON.
17 Out of Car Driver Paging (Optional Feature) If someone tries to page you by tapping the paging (knock) sensor (OPTIONAL) which is usually mounted on t he bottom part of front window, the paging melody sound continues sounding from you Remote LCD Transmitter and the “ ” icon will flash on the LCD screen.
18 X. S ECOND VEHICLE SECURITY OPERATION: Your 5 - button remote transmitter can be utilized to control a second vehicle security system, To program the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming.
19 REMOTE START OPERATION: A. TO REMOTE START THE VEHICLE: When you want to start your vehicle, 1. Press button once on the transmitter. 2. The parking light will activate to indicate the remote start received the signal. 3. The engine will start in app roximately 5 seconds.
20 2. Before turning off the engine, press and release and buttons at the same time . -- The LED will flash indicating the remote start has entered the turbo charge mode . 3. Take the “Ignition Key” from the key cylinder. -- Engine keeps running. -- 4.
21 F . TEMPERATURE CHECK (OPTIONAL) If you installed the optional temperature sensor, you can monitor, Through the LCD screen, the present indoor temperature of the passenger compartment before cooling or heating your vehicle.
22 LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery.
23 This WARRANTY CARD is for your record. However, Auto Page reserves the right to request you to su bmit this WARRANTY CARD, which must have complete information to receive warranty service.
24 960 Knox Street Unit B Torrance, California 90503 Main Office: 310 - 323 - 1800 Customer Service: 800 - 262 - 2527 Ext. 462 www.autopageusa.com.
An important point after buying a device Autopage RS-725LCD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autopage RS-725LCD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autopage RS-725LCD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autopage RS-725LCD you will learn all the available features of the product, as well as information on its operation. The information that you get Autopage RS-725LCD will certainly help you make a decision on the purchase.
If you already are a holder of Autopage RS-725LCD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autopage RS-725LCD.
However, one of the most important roles played by the user manual is to help in solving problems with Autopage RS-725LCD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autopage RS-725LCD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
