Instruction/ maintenance manual of the product ME40B Samsung
Go to page of 212
User Manual ME32B ME40B ME46B ME55B UE46A UE55A The color and the appearance may differ depending on the product, and the speci fications are subject to change without prior notic e to improve the performance.
Table Of Cont ents 2 Table Of Contents BEFORE USING THE PRODUCT 11 Copyright 12 Cleaning 12 Storage 13 Safety Precautions 13 Symbols 14 Electricity and Safety 15 Installation 17 Operation PREPARATIONS.
Table Of Contents Table Of Cont ents 3 54 Connecting and Using a PC 54 Connecting to a PC 57 Changing the Resolution 59 Connecting an External Monitor 60 Connecting to a Video Device 60 Connection Usi.
Table Of Contents Table Of Cont ents 4 70 What is MDC? 70 Connecting to MDC 72 Connection Manag ement 73 Auto Set ID 74 Cloning 75 Command Retry 76 Getting Started with MDC 78 Main Screen Layout 79 Me.
Table Of Contents Table Of Cont ents 5 111 Advanced Settings 111 Black Tone 111 Dynamic Contrast 111 Shadow Detail 111 Gamma 112 Expert Pattern 112 RGB Only Mode 112 Colo(u)r Space 112 White Balance 1.
Table Of Contents Table Of Cont ents 6 122 Videos 122 Playing a Video 125 Photos 125 Viewing a Photo (or Slide Show ) 126 Music 126 Playing Music 128 Videos / Photos / Music - Additional Functions 128.
Table Of Contents Table Of Cont ents 7 144 Time 144 Clock set 144 Sleep Timer 145 On Timer 145 Off Timer 146 Holiday Management 146 Menu Language 147 Eco Solution 147 Energy Saving 147 Eco Sensor ( Of.
Table Of Contents Table Of Cont ents 8 155 General 155 Max. Power Saving 155 Game Mode 155 BD Wise 156 Auto Power 156 Standby Control 156 Lamp Schedule 156 OSD Display 156 Power On Adjustment 156 Temp.
Table Of Contents Table Of Cont ents 9 175 Local Schedule 176 Local Schedule Manager 176 Registering a Local Schedule 178 Modifying a local schedule Local Schedule 179 Deleting a local schedule Local .
Table Of Contents Table Of Cont ents 10 APPENDIX 200 Contact SAMSUNG WORLDWIDE 205 Responsibility for the Pay Service (Cost to Customers) 205 Not a product defect 205 A Product damage caused by custom.
11 Before Using the Product Before Using the Product Copyright The content s of this man ual are sub ject to cha nge without n otice to im prove qual ity.
12 Before Using the Product Before Using the Product Cleaning Exercise care when cleaning as the panel and e xterior of ad vanced LCDs ar e easily scratche d. Take the following steps when c leaning. The following images are for reference only. Real-life situations may differ from what is shown in the images.
13 Before Using the Product Before Using the Product Safety Precautions Symbols Cautio n RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
14 Before Using the Product Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damage d power cor d or plug, o r a loos e power s ocket.
15 Before Using the Product Before Using the Product Caution Installation Warning Do not disconnect the power cord wh ile the prod uct is being used. z The product may become damage d by an electric sho ck. Only use the p ower cor d provide d with your product by Samsung.
16 Before Using the Product Before Using the Product Caution Keep the plastic packa ging out of the reac h of children. z Children may suffoca te. Do not install t he product on an unst able or vibrating surfac e (insecure shelf, sloped surface, etc.) z The product may fall and become dam aged and/o r cause an injury.
17 Before Using the Product Before Using the Product Operation Warning Set down the p roduct gently z Product failure o r person al injury may result. Installing the product in a n unusual pl ace (a p.
18 Before Using the Product Before Using the Product During a lightn ing or thu nderstorm, power off the product a nd remove the power cable. z A fire or electric shoc k may result. Do not drop objects on the pr oduct or apply impact. z A fire or electric shoc k may result.
19 Before Using the Product Before Using the Product Caution Leaving the scr een fixed on a stationary imag e for an extend ed period o f time may cause aft erimage burn -in or defec tive pixels . z Activate power-saving mode or a moving-p icture screen saver if you will not be using the p roduct for an exten ded period of time.
20 Before Using the Product Before Using the Product Exercise caut ion when ad justing the prod uct angle o r stand height. z Your hand or fi nger may get stuc k and injured. z Tilting th e product a t an excessive angle may cause the product to fall and an injury may result.
21 1 Preparations 1 Preparations 1.1 C hecking the Contents 1.1.1 Removing the Packaging 1 Remove the blac k locking device at the bottom of the box. 2 Using the grooves in the bo x, lift and remove the t op of the box. 3 Check the compo nents and re move the styrofoam an d plastic bag .
22 Preparations 1 1 Preparations 1.1.2 Checking the Components z Contact the vendor where you purchased the product if any components are missing. z The appearance of the components and items sold separately may differ from the image shown. Components Components may differ in different locations.
23 Preparations 1 1 Preparations Items sold separately z The stand is not supplied. z The following items can be purchased at your nearest retailer. Wall-mount KIT RS232C stereo c able DVI cable HDMI-.
24 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Control Pa nel z The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z Keep the area between the remote sensor and remote control obstacle-free.
25 Preparations 1 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
26 Preparations 1 1 Preparations [RGB / DVI / HDMI AUDIO IN] Receives sound from a PC via an audio cable. [USB ] Connect to a USB memory device . [AV IN / COMPON ENT IN] Connects to a source de vice using the AV/c omponent ad apter. [DP IN] Connects to a PC using a DP c able.
27 Preparations 1 1 Preparations Assembling the Holder-Wire stand * Stand : S old separate ly 1.2.3 Anti-theft Lock z An anti-theft lock allows you to use th e product securely even in public places. z The locking device shape and locking method depend on the manufacturer.
28 Preparations 1 1 Preparations 1.2.4 Remote Control z Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. z Remote control button functions may differ for different products.
29 Preparations 1 1 Preparations Adjusting the OSD with the Remote Control To place batteries in the remote control 1. Open the OS D menu. 2. Select from Picture , Sound , Media , Network , System or Support in the displayed OSD menu scre en. 3. Chang e settings as desired.
30 Preparations 1 1 Preparations Remote Control Reception Range Use the remote c ontrol within 7m to 10m fro m the sensor o n the produ ct at an angle of 30 from the left and right. z Store used batteries out of reach of children and recycle. z Do not use a new and used battery together .
31 Preparations 1 1 Preparations 1.2.5 Connection Using an IR Stereo Cable Controlling more than one display pr oduct using your remote control z Connect the [ IR OUT] port on the pr oduct to th e [IR IN] port on the othe r display pr oduct using th e dedicated stereo cable.
32 Preparations 1 1 Preparations 1.3 Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. z Ensure that an authorized installa tion company installs the wall mount.
33 Preparations 1 1 Preparations 1.3.2 Ventilation 1. Installation on a Perpendicula r Wall Figure 1.1 Side view A Minimum 40 mm B Ambient temperat ure: Under 35 C z When installin g the product o n a.
34 Preparations 1 1 Preparations 2. Installation on an I ndented Wall Contact Samsung Customer Service Center for further details. When installing the product on an indented wall, al low at least the space specified above between the product and wall for ventilation and ensure th at the ambient temperature is kept below 35 C.
35 Preparations 1 1 Preparations 1.3.3 Dimensions Unit: mm (inches) All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your prod uct. Not responsible for typographical or printed errors.
36 Preparations 1 1 Preparations 1.4 Installing the Wall Mount 1.4.1 Preparing before installing Wall-Mount 1.4.2 Installing the Wall Mount Kit The wall mount kit (sold separately) allow s you to mount the product on the wall. For detailed informatio n on installing the wall moun t, see the instructions prov ided with the wall mount.
37 Preparations 1 1 Preparations Unit: mm (inches) Do not install your Wall Mount Kit wh ile your product is turned on. It may result in personal injury due to electric shock.
38 Preparations 1 1 Preparations 1.5 Remote Control 1.5.1 Cable Connection RS232C Cable z Pin assignment Interface RS232C (9 pins) Pin TxD (No. 2), Rx D (No.
39 Preparations 1 1 Preparations z RS232C cable Connector: 9-Pin D-Sub Cable : Cross Cable LAN Cable z Pin assignment -P1- -P1- -P2- -P2- Female Rx Tx Gnd 2 3 5 --------> <-------- --------- 1 2 3 Tx Rx Gnd STEREO PLUG (3.
40 Preparations 1 1 Preparations z Connector : RJ45 Direct LAN cable (PC to HUB) Cross LAN cable (PC to PC) Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ TX- 2 <--------> 2 TX- RX+ 3 <----.
41 Preparations 1 1 Preparations 1.5.2 Connection z Connection 1 z Connection 2 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT RJ45 RJ45.
42 Preparations 1 1 Preparations z Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT.
43 Preparations 1 1 Preparations 1.5.3 Control Codes Viewing control state (Get control command) Controlling (Set control command) Command z Issued IDs can be displayed in hexadecimals. However, ID 0 must be displayed as 0xFF. z All communications take place in hexadecima ls.
44 Preparations 1 1 Preparations E.g. Power On & ID=0 z To control all de vices connecte d by a serial ca ble simultaneous ly irrespective of IDs, set the ID as "0xFE" and transm it commands. Co mmands will b e executed by each device b ut ACK will not respond.
45 Preparations 1 1 Preparations Volume control z Function The volume o f a product can be adjuste d using a PC . z Viewing volume sta te (Get Volume Stat us) z Setting the vo lume (Set Volu me) "Volume": Volume value code to be set on a product.
46 Preparations 1 1 Preparations Input source control z Function The input s ource of a p roduct can be change d using a PC . z Viewing input sour ce state (Get Input Source Stat us) z Setting the in put source (Set Input Sour ce) "Input Sou rce": An input sour ce code to be set o n a product.
47 Preparations 1 1 Preparations z Ack "Input Sou rce": An input sour ce code to be set o n a product. z Nak "ERR" : A code showing what error has o ccurred. Screen z Function The screen mode of a product can be chang ed using a PC.
48 Preparations 1 1 Preparations z Ack "Screen Mode": A code that sets the pro duct status. z Nak "ERR" : A code showing what error has o ccurred. Screen size control z Function The screen size of a pro duct can b e changed using a PC.
49 Preparations 1 1 Preparations PIP On/Off control z Function The PIP mode o f a product can be tu rned on or off using a PC. Only available on models that have the PIP function. The mode cannot be controlled if Video Wall is set to On . This function is not available in MagicInfo.
50 Preparations 1 1 Preparations Auto adjustment control (PC and BNC only) z Function Automatically ad just the PC system screen usin g a PC. z Viewing auto adjustm ent state (Get Auto Adjustmen t Sta.
51 Preparations 1 1 Preparations Video Wall Mode Control z Function Video Wall Mode c an be activa ted on a pr oduct using a PC. This contro l is only available on a pro duct whos e Video Wall is enabled. This funct ion is not av ailable in MagicInfo.
52 Preparations 1 1 Preparations Safety Lock z Function PC can be used to turn t he Safety Lock function on or off on a product. This contro l is available regardless o f whether or not the power is tur ned on.
53 2 Connecting and Us ing a Source Device 2 Connecting and Using a Source Device 2.1 Before Connecting Check the follo wing before yo u connect t his product w ith other d evices. Devices th at can be connected to this product inc lude PCs, camco rders, speaker s, set top boxes and DVD /Blu-ray Disc playe rs.
54 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2 Connecting and Using a PC 2.2.1 Connecting to a PC z Do not conne ct the power cable bef ore conne cting all oth er cables. Ensure you conne ct a source device first be fore connec ting the power cable.
55 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an HDMI-DVI Cable When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC.
56 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an DP Cable DP IN.
57 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2.2 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selecte d.
58 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows 7 Go to Control P anel Display Screen Resolution , and change the resolution .
59 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3 Connecting an External Monitor z The following images are for reference only. Real-life situations may differ from what is shown in the images. z The Loopout function can be used to duplicate the screen of the primary display.
60 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4 Connecting to a Video Device z Do not conne ct the power cable bef ore conne cting all oth er cables. Ensure you conne ct a source device first be fore connec ting the power cable.
61 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4.3 Connection Usin g an HDMI-DVI Cable z Audio will not be enabled if the product is conn ected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device.
62 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device z Be sure to purc hase a certified HDMI cable. Ot herwise, the p icture may not di splay or a conne ction error may o ccur. z A basic high-speed HD MI cable or one with eth ernet is recom mended.
63 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.5 Connecting the network box (Sold separately) For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.
64 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Entering MagicInfo mode 1 After installing and connec ting the network box (sold separate ly) to the produc t, power on the product. 2 Press SOURCE on the remote co ntrol, and se lect MagicInfo .
65 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 4 Enter the IP in formation. 5 Select a language. (T he default la nguage is English .) MagicInfo Setup Wizard - v .1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: Subnet mask: Default gateway: 192 .
66 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 6 Select a display mode . 7 Double-check the settings yo u have just co nfigured. z If the execution icon does not appear, double-click the MagicInfo icon on the desktop.
67 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.6 Changing the Input source 2.6.1 Source MENU Media Source ENTER Source allows you to select a variety of sources an d change so urce device n ames. Source You can display th e screen of a sou rce device conne cted to the produ ct.
68 3 Using MDC 3 Using MDC MDC (Multiple Display Contr ol) is an applicati on that allows you to eas ily control multi ple display devices simultaneously using a PC. 3.1 Configuring Settings for Multi Control MENU System Multi Control ENTER Assign an individual ID to your product.
69 Using MDC 3 3 Using MDC 3.2 MDC Program Installation/Uninstallation 3.2.1 Installation 1 Insert the installation CD into the CD-ROM drive. 2 Click the MDC Unified installation program. If a software installation window is not displayed on the main screen, install with the "MDC Unifie d" execution file in the MDC folder on the CD.
70 Using MDC 3 3 Using MDC 3.3 What is MDC? Multiple display control (MDC) is an application that allows you to easily control mu ltiple display devices simultaneously us ing a PC.
71 Using MDC 3 3 Using MDC Using MDC via Ethernet Enter the IP for the prima ry display devic e and conne ct the de vice to the PC. One d isplay device c an connect to an other using an RS-232C serial ca ble. Communicate with LAN cable Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB.
72 Using MDC 3 3 Using MDC 3.3.2 Connection Management Connection m anagement includes th e Connect ion list and Connection list modification opt ions .
73 Using MDC 3 3 Using MDC 3.3.3 Auto Set ID Auto Set ID feature assigns a Set ID fo r all the LFDs connected in d aisy-chain of a sele cted connection. There can b e a maximu m of 100 L FDs in a conn ection. Th e Set ID is a ssigned sequ entially in the da isy- chain runnin g from 1 to 99, and then finally to Se t ID 0.
74 Using MDC 3 3 Using MDC 3.3.4 Cloning Using the Cloning feature, you can copy the settin g of one LFD and ap ply it to mu ltiple selected LF Ds. You can select specific tab cat egories or all t ab categories fo r cloning, using t he copy settin g option window.
75 Using MDC 3 3 Using MDC 3.3.5 Command Retry This feature is used to specify the maximum number of time s the MDC command will be retried in case of there being no reply or a corrupte d reply fro m an LFD. Th e retry co unt value can be set us ing the MDC options window.
76 Using MDC 3 3 Using MDC 3.3.6 Getting Started with MDC 1 To start the program , click Start Programs Samsung MDC Unified . 2 Click Add to add a disp lay device. z If the connect ion is established via RS232C, go to Serial and spec ify the COM Port .
77 Using MDC 3 3 Using MDC z If the connect ion is established via Ether net , enter the IP th at was entere d for the disp lay device..
78 Using MDC 3 3 Using MDC 3.3.7 Main Screen Layout Menu Bar Change the stat us of a display d evice or the prop erties of the p rogram. Device Category View a list of connected disp la y devices or device groups. Schedule Category View a list of schedules for display devices.
79 Using MDC 3 3 Using MDC 3.3.8 Menus You can power on or off a selec ted device or chan ge the input source or volume of the device. Choose display device s from the lis t of sets, an d select the Home tab. Home Select an item an d change the co rresponding set ting.
80 Using MDC 3 3 Using MDC This menu sh ows a list of d isplay devices which hav e following er rors - fan e rror, temp erature error, brigh tness sensor error, or lamp erro r. Select a display device from th e list. The Repair button will be en abled.
81 Using MDC 3 3 Using MDC 3.3.9 Screen Adjustment The screen s ettings (c ontrast, brightness, et c.) can be adjusted. Choose display device s from the lis t of sets, an d select the Picture tab. Custom Select an item an d change the co rresponding scr een setting.
82 Using MDC 3 3 Using MDC Blue z Customize the intensity of blue co lor for the selected display device..
83 Using MDC 3 3 Using MDC Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the g amma value f or the selec ted displa y. Auto Motion Pl us This option is u sed to v iew dynamic images. z Off : Disable the Auto Motion Plus fu nction.
84 Using MDC 3 3 Using MDC Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode th at does not suppor t detailed configur ation. The -/+ butt ons can b e used to ad just Zoom .
85 Using MDC 3 3 Using MDC 3.3.10 Sound Adjustment You can chan ge the sou nd settings. Choose display device s from the lis t of sets, an d select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set.
86 Using MDC 3 3 Using MDC 3.3.11 System Setup Choose display device s from the lis t of sets, an d select the System tab. Video Wall The Vide o Wall functio n can be used to display part of a whole picture or repea t the same picture on each of connec ted multiple d isplay devices.
87 Using MDC 3 3 Using MDC H Select the number of ho rizontal display devices. A maximum of 15 displays can be ar ranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. V Select the number of vertical display devices. A maximum of 15 displays can be ar ranged in a row.
88 Using MDC 3 3 Using MDC PIP Basic information re quired to adjust PIP will app ear in the men u screen. z PIP will be disabled when Video Wall is ON . z Note that Picture Size is disabled when PIP is ON . PIP Size View the PIP Size of the curr ent displa y.
89 Using MDC 3 3 Using MDC General User Auto Color Automatically adju st the screen color s. Available only in PC mode. Auto Power Set the prod uct to autom atically po wer on. Standby Control Set the stan dby mode to activate if a n input source is not d etected.
90 Using MDC 3 3 Using MDC Security Safety Lock Lock the on -screen m enus. To unlock the menus, set Safety Lock to Off . Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off . OSD Display Source OSD Select whether to display a messa ge when the Source is chang ed.
91 Using MDC 3 3 Using MDC Time Clock Set Change the c urrent time o n the selec ted displa y device accor ding to th e time set on a PC. If the time is not set on the display device, null values will be displayed. Timer z On Time : Set the time to powe r on the s elected disp lay device.
92 Using MDC 3 3 Using MDC Once : Activate the timer only on e time. EveryDay : Activat e the timer ever y day. Mon~Fri : Activa te the timer from Monday th rough Frid ay. Mon~Sat : Activate the timer from Mo nday throug h Saturday. Sat~Sun : Activate the tim er on Saturdays and Sundays.
93 Using MDC 3 3 Using MDC Screen Burn Protection Pixel Shift Move the scr een slightly at specified time intervals to prevent scre en burn-in . Screen Saver This function p revents scr een burn-in whe n the scre en of the s elected disp lay device is left idle fo r an extended period of time .
94 Using MDC 3 3 Using MDC The Safety Screen function can be use d to prev ent screen bu rn-in when a stationar y image displa ys on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backligh t to reduce power co nsumption.
95 Using MDC 3 3 Using MDC Reset Reset Picture Reset the scre en settings. Reset Sound Reset the sound settings. Reset System Reset the sys tem settin gs. Reset All Reset the screen, soun d and system settings at the same time. Edit Column Select the items you want to disp lay in the list of sets.
96 Using MDC 3 3 Using MDC 3.3.13 Other Functions Resizing a Window Place the mou se pointer on a corn er of the pr ogram windo w. An arro w will appe ar.
97 Using MDC 3 3 Using MDC Group Management Creating G roups Create groups an d manage the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and select Group>Edit in the display device list sec tion on the left s ide of the p rogram window.
98 Using MDC 3 3 Using MDC The Add on the same level button is enabled only if at least one group is created. 3 Enter the grou p name. Deleting Groups 1 Select a grou p name, and click Edit . 2 In the Edit Group window displayed, click Delete . 3 Click Yes .
99 Using MDC 3 3 Using MDC Schedule Management Creating Sch edules Create and r egister a sc hedule on a group ba sis. 1 Click All Schedule Lis t in the schedule sec tion on the left side of the prog ram window. The Add button will be enable d in the middle.
100 Using MDC 3 3 Using MDC 3 Click Add belo w the Device Gr oup item, and select the group you wa nt to add a schedule to. 4 Select Date&Time/Action an d click OK . The schedule will be added and a list of schedules will appear in the set list window.
101 Using MDC 3 3 Using MDC 3.3.14 Troubleshooting Guide This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emit ted from nearby electronic devices. Issue Solution The display you want t o control does not ap pear on th e system information chart.
102 Using MDC 3 3 Using MDC How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is se lected: Settin gs for the se lected dis play are displaye d. 3 When two displays are selected (e.
103 4 Screen Adjustment 4 Screen Adjustment Configure the Picture settings ( Brightness , Colo(u)r Tone , etc.). The layout of the Picture menu options may vary depending on the product. 4.1 Picture Mode MENU Picture Picture Mode ENTER Select a picture mode ( Picture Mode ) suitable for the enviro nment where the pr oduct will be used .
104 Screen Adjustment 4 4 Screen Adjustment 4.2 Backlight / Contrast / Bright ness / Sharpness / Colo(u)r / Tint(G/R) MENU Picture ENTER Your product ha s several options for adjust ing picture quality. Select an optio n using the and buttons, and then press [ ].
105 Screen Adjustment 4 4 Screen Adjustment 4.3.1 Picture Size If you have a cable b ox or satellite rec eiver, it may ha ve its own set of screen si ze s as well. Howev er, we highly recommen d you use your produc t 16:9 m ode most o f the time. z 16:9 : Sets the pict ure to 16:9 wide mode.
106 Screen Adjustment 4 4 Screen Adjustment 4.3.2 Position Adjusts the picture po sition. Position is only available if Picture Size is set to Zoom1 , Zoom2 , Wide Fit , Screen fit or Custom . To use the Position fu nction a fter sel ecting Zoom1 , Zoom2 or Wide Fit , follow these steps .
107 Screen Adjustment 4 4 Screen Adjustment 4.3.4 Resolution Select If the picture is not normal even whe n the resolution of the graphics card is one of the following , you can optimize the p icture qua lity by select ing the sam e resolution for the pro duct as th e PC using this menu.
108 Screen Adjustment 4 4 Screen Adjustment A responsible ad ult should freq uently check on children who ar e using the 3D function. If the re are any reports of tired eyes , headaches, dizzine ss, or nausea, have the child stop viewing 3D product and r est.
109 Screen Adjustment 4 4 Screen Adjustment z L/R Change ( L/R Image / R/L Image ): Swap the left and right pictures. z 3D 2D ( Off / On ): Displays the image for the left eye only.
110 Screen Adjustment 4 4 Screen Adjustment Supported for mats and oper ating specifications for Standard HDMI 3D The 3D formats indicated below are recommended by the HDMI association and must be supported. z 3D Mode is set to its memorized configuration value automa tically when you changing the input source.
111 Screen Adjustment 4 4 Screen Adjustment 4.6 Advanced Settings MENU Picture Advanced Settings ENTE R All Advanced Sett ings are available in the Standard and Movie mod es. To use, select an option us ing the up and down arrow keys, and th en press .
112 Screen Adjustment 4 4 Screen Adjustment 4.6.5 Expert Pattern Use the Expert Pattern function to calibrate th e picture. If the OSD me nu disappe ars or a men u other than the Pictur e menu is o pened, the product saves the ca libration and the Expert Pattern screen disappears.
113 Screen Adjustment 4 4 Screen Adjustment 4.6.9 10p White Balance (Off / On) Controls th e white bala nce in 10 p oint interva l by adjustin g the red , green, and blue brig htness. z Interval : Select interval to adjust . z Red : Adjust the red level.
114 Screen Adjustment 4 4 Screen Adjustment 4.7 Picture Options MENU Picture Picture Options ENTER Select an option using the up a nd down arr ow keys, and the press [ ]. Use the arrow keys t o change the settin g, and then press [ ]. When connecting a PC, you can only make changes to the Colo(u)r Tone .
115 Screen Adjustment 4 4 Screen Adjustment 4.7.4 MPEG Noise Filter Reduces MPEG noise t o provid e improved picture qua lity. z Off / Low / Medium / High / Auto 4.7.5 HDMI Black Level Lets you adjust the screen dep th by selecting a black level. z Normal / Low Available only in HDMI mode.
116 Screen Adjustment 4 4 Screen Adjustment z Blur Reduction : Use to reduce th e afterimage as much as you want. This is only supported if the Auto Motion Plus is set to Cust om . z Judder Reduc tion : Use to reduce th e judde r as much as you want .
117 5 Sound Adjustment 5 Sound Adjustment Configure the sound ( Sound ) settings for the product. 5.1 Sound Mode MENU Sound Sound Mode ENTER Use the up an d down ar row keys to se lect an op tion, and the n press [ ]. z Standard : Selects th e normal sou nd mode.
118 Sound Adjustment 5 5 Sound Adjustment 5.2 Sound Effect MENU Sound Sound Effect ENTER z If Speaker Select is set to External , Sound Effect is disabled. z Available only when Sound Mode is set to Standar d . z SRS TruSurround HD ( Off / On ) This funct ion provides a virtual 5.
119 Sound Adjustment 5 5 Sound Adjustment 5.3 3D Audio (UE46A & UE55A models only) MENU Sound 3D Audio ENTER 5.3.1 3D Audio (Off / Low / Medium / High) 3D audio tech nology pro vides the im mersive so und corresp onding to th e pop-up effect of 3 D video by audio depth control in pe rspective.
120 Sound Adjustment 5 5 Sound Adjustment 5.5 Reset Sound MENU Sound Reset Sound ENTER Reset all sound settings to the fa ctory default s. Select Reset Sound , press ENTER [] , s e l e c t Yes in the pop-up, and then press ENTER [ ] again.
121 6 Media 6 Media 6.1 MagicInfo Lite MENU Media MagicInfo Lite ENTER [] Press the MagicInfo Lite button on the remote contro l. 6.1.1 MagicInfo Lite Player Guide MagicInfo Li te Player allo ws you to play conten t (image, vid eo, docume nt files) at a desired time .
122 Media 6 6 Media 6.2 Videos MENU Media Videos EN TER [] Connecting a USB Device 1 Turn on your product. 2 Connect a USB device co ntaining photo, music and/ or movie files to th e USB port on the back or side panel of th e produc t. 3 When a USB device is connec ted to the product, the Connect ed Device screen appears.
123 Media 6 6 Media Supported Video Formats z Video content will not play, or not play correctly, if there is an error in the content or the container. z Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
124 Media 6 6 Media z Video content can not be played, if th ere ar e many co ntents in one file. z When you play video over a network connecti on, the video may not be played smo othly. z The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.
125 Media 6 6 Media 6.3 Photos MENU Media Photos ENTER [] Connecting a USB Device 1 Turn on your product. 2 Connect a USB device co ntaining photo, music and/ or movie files to th e USB port on the back or side panel of th e produc t. 3 When a USB device is connec ted to the product, the Connect ed Device screen appears.
126 Media 6 6 Media 6.4 Music MENU Media Music ENTER [] Connecting a USB Device 1 Turn on your product. 2 Connect a USB device co ntaining photo, music and/ or movie files to th e USB port on the back or side panel of th e produc t. 3 When a USB device is connec ted to the product, the Connect ed Device screen appears.
127 Media 6 6 Media Playing My Playlist Select the My Playlist folder and it will pla y automatically. Pres s the or butto n to play a different music file within th e play list. To delete a file from My Playlist , select the recycle bin icon next to the file you want to delete by using the direction buttons, and then press [ ].
128 Media 6 6 Media 6.5 Videos / Photos / Music - Additional Functions 6.5.1 Sorting the file lists To sort files in the f ile lists, select the ( Sorting ) icon in the top right of the sc reen by using th e / / / button. Then, press the [ ] button. Th e checks below indicate which med ia the sort criter ia apply to.
129 Media 6 6 Media 6.5.2 Videos/Photos/Musi c Play Option menu When playing video or phot o files, you can press t he TOOLS button to display an Opti ons menu. Below are a se ries of tables listing the optio ns available an d the media each optio n applies to.
130 Media 6 6 Media z Pressing the INFO button while a device name is selected will display information about the selected device. z Pressing the INFO button while a file is selected w ill display information about the selected file. Start Slide Show / Stop Slide Show You can start or stop a slide show.
131 Media 6 6 Media 6.6 Source MENU Media Source ENTER [] Source allows you to select a variety of sources an d change so urce device n ames. 6.6.1 Source You can display the screen of a source device connec ted to the p roduct. Select a source fro m Source List to display the screen of the selected source.
132 Media 6 6 Media z When connect ing a PC to the HDMI IN port with HDMI cabl e, you shoul d set the prod uct to PC mode under Edit Name . z When connect ing a PC to the HDMI IN port with HDM I to DVI cable, you should set the produc t to DVI PC mode un der Edit Name .
133 7 Network 7 Network 7.1 Network Settings 7.1.1 Connecting to a Wired Network There are t hree ways t o attach your product to your LAN u sing cable: z You can at tach your pro duct to your LAN by connecti ng the LAN port on the back of your product to an external mod em using a LAN cable.
134 Network 7 7 Network access the Inte rnet so you do not h ave to enter them ma nually. Most hom e networks a re Dynamic Networks. Some networks requ ire a Static IP addre ss.
135 Network 7 7 Network Manual Network Setup Use the Manu al Network Se tup when co nnecting your produ ct to a netwo rk that re quires a Sta tic IP address. Getting the Netw ork Connect ion Values To view the Ne twork connectio n values on m ost Windows comput ers, follow these steps.
136 Network 7 7 Network 7.1.3 Connecting to a Wireless Network To connect your produ ct to your w ireless netwo rk, you nee d a wireless ro uter or mo dem and a Samsun g Wireless LAN adapter (WIS10ABGN, WIS12ABG NX), which you connect to you r product ba ck or side panel USB port.
137 Network 7 7 Network z Ensure the product is turned on before you connect the Samsung Wireless LAN adapter. z Connection Methods: You can setup the wireless network connection in five ways: Aut.
138 Network 7 7 Network 7 When done, u se the right arrow butto n to mov e the cursor to Next , and t hen press [ ]. 8 The network connection sc reen appea rs and the ver ification proce ss starts. Whe n the connec tion has been verifie d, the “Internet is connected successfully .
139 Network 7 7 Network 7 When done, u se the butto n to move t he cursor to Next , and then press t he [ ] button . 8 The network connection sc reen appea rs and the ver ification proce ss starts. Pre ss [ ] to cancel. Select IP Settings on the network c onnection scr een.
140 Network 7 7 Network 7.1.6 One Foot Connection The On e Foot Conn ection fu nction lets you con nect your Samsun g product automatically to a Samsung wireless routers. If your wi reless router does not support One Foot Connection , you must connect using one of the other meth ods.
141 Network 7 7 Network 7.1.7 Ad Hoc Network Setup You can conn ect to a mo bile device supp orting Ad-ho c connections without a w ireless route r or AP through the produ ct. How to set up using Ad hoc 1 Go to Network Settings screen. 2 Select Wireless (Genera l) , and press [ ], then p ress [ ] again.
142 Network 7 7 Network 7.3 MagicInfo Lite Settings MENU Network MagicInfo Lite Settings ENTER [] 1 Server z Setting the MagicInfo Li te server IP Enter the serve r IP address and port number.
143 8 System 8 System 8.1 Multi Control MENU System Multi Control ENTER Assign an individual ID to your product. 8.1.1 Configuring settin gs for Multi Control z MDC Connection Select a method to connect to MDC to receive the MDC sign al. RS232C MDC Communicate with MDC via the RS232C-stereo cabl e.
144 System 8 8 System 8.2 Time MENU System Time ENTER You can configu re Clock Set or Sleep Timer . You can also set the product to automatica lly turn on or off at a specified time using the Timer function. 8.2.1 Clock set Set the cloc k to use the v arious vari ous timer f eatures of the product .
145 System 8 8 System 8.2.3 On Timer Set On Timer so that you r product turns on a utomatically at a time and on a day of your choos ing. z On Timer : You ca n set up t hree separat e On Timer configurations. ( On Timer 1 , On Timer 2 , On Timer 3 ) You must set the clock before you can use On Timer .
146 System 8 8 System 8.2.5 Holiday Management Timer will be disable d during a p eriod spec ified as a holid ay. Setting Holiday Management z Add : Specify the period yo u want to ad d as a ho liday. Select the star t and end dates of the holi day you want to add using th e / butt ons, and clic k the Save button.
147 System 8 8 System 8.4 Eco Solution MENU System Eco Solution ENTER 8.4.1 Energy Saving Save power with th e Energy Saving feature. While Energy Savin g mode is active, the product po wer consump tion will be controlle d to save po wer. z Off / Low / Medium / High / Picture Off 8.
148 System 8 8 System 8.5 Security MENU System Security ENTER Every time you access the Security functions, the PIN screen will appear and the default PIN number is “0-0-0-0".
149 System 8 8 System 8.6 PIP MENU System PIP ENTER z If you have set , mode in PIP (Picture-in-Picture), you cannot adjust the Picture Size . z For PIP sound, refer to the Sound Select instructions. z If you turn the product off while watching in the PIP mode, the PIP function is reset to off.
150 System 8 8 System 8.8 Screen Burn Protection MENU System Screen Burn Protection ENTER To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn preven tion technolog y. Pixel Shift moves th e picture slightly on the screen.
151 System 8 8 System 8.8.2 Timer You can set th e timer for Screen Burn Protection . If you start the operation to erase any residual imag e, the oper ation will be performed for the set period of time and then a utomatically finish. z Mode : You can change the Safety Sc reen Type.
152 System 8 8 System 8.9 Video Wall MENU System Video Wall ENTER Customize the layout of mult iple displays th at are co nnected to form a vide o wall. In ad dition, disp lay part of a whole pic ture or r epeat the sam e picture on each of t he connec ted mult iple displays.
153 System 8 8 System 8.9.3 Horizontal This function auto matically divides t he screen acc ording to th e specified numb er of horizon tal displays. Enter the number of horizontally ar ranged displ a ys. The horizontal screen will au tomatically be divided according to t he number ent ered.
154 System 8 8 System 8.10 Source AutoSwitch Settings MENU System Source AutoSwitch Settings ENTER z Turning on the disp lay with Source AutoSwitch On , and the p revious video sour ce selection is n ot active, the disp lay will automati cally search t he different vid eo input source s for active video .
155 System 8 8 System 8.11 General MENU System General ENTER 8.11.1 Max. Power Saving Turns off the p roduct to re duce powe r consumption after the PC h as been left idle for a specified period of time.
156 System 8 8 System 8.11.4 Auto Power Enabling this option will automa tically power on the product if the power cable is connected. 8.11.5 Standby Control You can set th e screen st andby mo de to be ap plied when a n input signal is received.
157 System 8 8 System 8.11.10 Device Name Selet or enter a Device Name . This name can be shown on ne twork remote controls over th e network. 8.11.11 3D Video Sync (UE 46A & UE55A models only) Synchronize the d isplays with you r 3D glasses whe n viewing a 3D v ideo using mult iple displays.
158 System 8 8 System 8.12 Anynet+(HDMI-CEC) MENU System Anynet+(HDMI- CEC) ENTER 8.12.1 Anynet+(HDMI-CEC) What is Anynet+ ? Anynet+ is a functi on that enab les you to contro l all connec ted Samsung d evices that sup port Anynet+ with your Samsung product remote .
159 System 8 8 System Anynet+ Menu The Anynet+ me nu chang es dependin g on the typ e and status o f the Anynet + devices conne cted to the product. 8.12.2 Auto Turn Off Setting an Anynet+ Device to t urn Off automa tically when the product is t urned off.
160 System 8 8 System z If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use the Anynet+ function.
161 System 8 8 System Listening through a Receiver You can listen to sound through a r eceiver (i.e H ome Theater ) instead o f the Internal Speaker . 1 Select Receiver and set to On . 2 Press the EX IT butt on to exit. z If your receiver supports audio only, it may not appear in the device list.
162 System 8 8 System 8.12.3 Receiver Sound is played through the receiver. The connec ted device is not displayed. z Check wheth er or not the device supports Anynet+ functions. z Check whether or not the HDMI cable is properly connected . z Check whet her Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
163 System 8 8 System 8.13 DivX® Video On Demand MENU System DivX® Video On Demand ENTER Shows the reg istration code authorized for the pro duct. If you connect to the DivX web site and r egister using that co de, you can d ownload t he VOD registr ation file.
164 9 Support 9 Support 9.1 Software Upgrade MENU Support Software Upgrade ENTER The Software Upgrade menu lets you up grade your p roduct software to the latest version. z Current Version : This is the software version already installed in the produc t.
165 Support 9 9 Support 9.2 Contact Samsung MENU Support Contact Samsun g ENTER View this info rmation wh en your pro duct does not work pr operly or wh en you wan t to upgrad e the software. You can find in formation re garding our call center s and how to download products an d software.
166 10 MagicInfo Lite 10 MagicInfo Lite 10.1 File Formats Compatible with MagicInfo Lite Player 10.1.1 Video / Audio [Read before usin g MagicInfo Lite Player ] z Supported USB-device file systems include FAT16 and FAT32 .
167 MagicInfo Lite 10 10 MagicInfo Lite *.3gp 3GP P H.264 BP / M P / HP 1920x1080 6 ~ 30 25 ADPCM / AAC / HE-AAC MPEG4 SP / ASP 1920x1080 6 ~ 30 8 *.vro VRO VOB MPEG1 352x288 24 / 25 / 30 30 AC3 / MPEG / LPCM MPEG2 1920x1080 24 / 25 / 30 30 *.mpg *.mpeg PS MPEG1 352x288 24 / 25 / 30 30 AC3 / MPEG / LPCM / AAC MPEG2 1920x1080 24 / 25 / 30 30 H.
168 MagicInfo Lite 10 10 MagicInfo Lite Audio z Audio content witho ut video is not supported . (Only mp3 files a re supported as b ackground music for image/PPT slideshows.
169 MagicInfo Lite 10 10 MagicInfo Lite Power Point z Compatible docume nt file format s Extension : ppt, pptx Version : Office 97 ~ Offic e 2007 z Functions not supporte d Animation effec.
170 MagicInfo Lite 10 10 MagicInfo Lite 10.2 Network Schedule 10.2.1 Connecting to a server To use the MagicInfo Lite Server , the clock on th e monitor must be se t through the server (web) . To use local schedules and AutoPlay only, without using the MagicInfo Lite Server , the clock must be set using the remo te contro l.
171 MagicInfo Lite 10 10 MagicInfo Lite 10.2.2 MagicInfo Lite Settings MENU Media MagicInfo Lite ENTER [] Press the MagicInfo Lite button on the remote contro l. You can view wh ether the ser ver is connected (approval) in t he MagicInfo Lite menu screen.
172 MagicInfo Lite 10 10 MagicInfo Lite 3 Select Device fr om the top menu bar. 4 Select Lite Device from the menus on the left..
173 MagicInfo Lite 10 10 MagicInfo Lite 5 Select View Unapproved Lite De vice from the sub -menus of Lite Device . 6 Select the Approve button for your device from the list of unapproved Lite devices. Pressing the INFO button on the remote when a network schedule is running will display the details of the schedule.
174 MagicInfo Lite 10 10 MagicInfo Lite 8 Select the View All Lite Device m enu to ch eck that th e device has b een registe red. 9 When the device is ap proved by the serv er, the schedu le registered in the selected g roup will be downloaded to the device .
175 MagicInfo Lite 10 10 MagicInfo Lite 10.2.4 Setting the current time A schedule m ay not ru n if the time set on the de vice is differen t from th e server's c urrent time. 1 Go to the tabs Device Time . 2 Select your de vice. 3 Select Clock Set , and sync the time with the ser ver.
176 MagicInfo Lite 10 10 MagicInfo Lite 10.4 Local Schedule Manager Configure the se ttings for playbac k from Local Schedule . Alternatively, s elect and play content from internal or USB m emory acco rding to the customiz ed playback sequence . 10.4.
177 MagicInfo Lite 10 10 MagicInfo Lite z E.g.) PM 09:00 - AM 12:00 / AM 12:00 - AM 06:00 4 Select Contents to specify the content you want to pla y. 5 Select Save .
178 MagicInfo Lite 10 10 MagicInfo Lite 7 Check that the schedule has been added to the Local Sch edule Manager. 10.4.2 Modifying a local schedule Local Schedule Ensure at least one local schedule Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen.
179 MagicInfo Lite 10 10 MagicInfo Lite 2 Select the local schedule you want to m odify. 3 Select Edit . 4 Change the d etails of the local schedu le. Next, se lect Save . 10.4.3 Deleting a local sc hedule Local Schedule Ensure at least one local schedule Local Schedule is registered.
180 MagicInfo Lite 10 10 MagicInfo Lite 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local schedule you want to d elete.
181 MagicInfo Lite 10 10 MagicInfo Lite 10.4.4 Running a local schedule Local Schedule Ensure at least one local schedule Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local sche dule you want to run.
182 MagicInfo Lite 10 10 MagicInfo Lite 10.4.5 Stopping a local schedule Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from local schedule to network schedule. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen.
183 MagicInfo Lite 10 10 MagicInfo Lite 10.4.6 Viewing the details of a local schedule Local Schedule 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the loca l schedule you want to view the detail s of. 3 The details of the sc hedule will be disp layed.
184 MagicInfo Lite 10 10 MagicInfo Lite 10.5 Contents Manager 10.5.1 Copying content 1 Select Contents Manager in the MagicInfo Lite menu scre en. 2 Select the cont ent you want to copy. z If content under Internal Memory is selec ted: You ca n copy the content und er Internal Memory to USB memory .
185 MagicInfo Lite 10 10 MagicInfo Lite 10.5.2 Deleting content 1 Select Contents Manager in the MagicInfo Lite menu scre en. 2 Select the conten t you want to delete. z Content un der Internal Memory and US B memory can b e deleted at the same time. 3 Select Delete .
186 MagicInfo Lite 10 10 MagicInfo Lite 10.6 Internal AutoPlay 10.6.1 Running Internal AutoPlay Ensure at least one content item exists under Internal Memory . 1 Select Internal AutoPlay in the MagicInfo Lite menu screen. z Play content, which has been cop ied to Internal Memory , in alphabetic al order.
187 MagicInfo Lite 10 10 MagicInfo Lite 10.7 USB AutoPlay 10.7.1 Running Internal AutoPlay Ensure a USB device is inserted. Be sure to create a folder named "MagicInfoSlide" in the USB device and put content in the folder. 1 Select USB AutoPlay in the Mag i cInfo Li te menu screen.
188 MagicInfo Lite 10 10 MagicInfo Lite 7 Schedule Download : Displays the progress o f a network sc hedule bein g downloa ded from th e server. 10.8.2 Changing the settings fo r the content that is running Press the TOOLS button on the remote control.
189 11 Troubleshooting Guide 11 Troubleshooting Guide 11.1 Requirements Before Co ntacting Samsung Customer Service Center 11.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center.
190 Troubleshooting Guide 11 11 Troubleshooting Guide Screen issue The power LED is off. The screen will not switch on. Make sure th at the pow er cord is connected . ("2.2 Conn ecting and Using a PC") " No Signal " is displayed on the screen (refer to "Connecting to a PC").
191 Troubleshooting Guide 11 11 Troubleshooting Guide Sound issue There is no sou nd. Check the co nnection of th e audio ca ble or adjust the volume ("2.2 Conn ecting and Using a PC") Check the volume. The volume is too low. Adjust the volume.
192 Troubleshooting Guide 11 11 Troubleshooting Guide 11.2 Q & A Refer to the user manual for your PC or graphics card for further instructions on adjustment. Question Answer How can I change the frequency? Set the frequ ency on you r graphics c ard.
193 12 Specifications 12 Specifications 12.1 General Model Name ME32B ME40B Panel Size 32 inches (80cm) 40 inches (101cm) Display area 698.4 m m (H) x 392.85 m m (V) 27.5 inches (H) x 15.5 inches (V) 885.6 mm (H) x 498.15 mm (V) 34. inches (H) x 19 .6 inches (V) Display Color 1.
194 Specifications 12 12 Specifications Power Supply : This product uses 100 to 240V. Refer to the lab el at the back of the prod uct as the standard vo ltage can vary in different countrie s. Plug-and-Play : This monit or can be inst alled and used with any Plug-and -Play compatible systems.
195 Specifications 12 12 Specifications 12.2 PowerSaver The power-sa ving funct ion of this p roduct redu ces power c onsumption by switching o ff the scree n and changing the co lor of the pow er LED if the prod uct is not used for a specified period of tim e.
196 Specifications 12 12 Specifications z To reduce t he power consumptio n to 0, tur n off the sw itch at th e back or d isconnec t the power cord. Disconnec t the power ca ble if you will not be u sing the prod uct for an exten ded period of time (during vacatio n, etc.
197 Specifications 12 12 Specifications 12.3 Preset Timing Modes z This produ ct can be set to only on e resolution for each scr een size to ob tain the op timum picture quality due to the nature of the pane l. Using a r esolution othe r than the specified re solution may degrade the picture qual ity.
198 Specifications 12 12 Specifications Horizontal Freq uency The time re quired to sca n a single line from the left to the r ight side of the screen is called a horizontal cyc le. The reci procal numb er of a horizont al cycle is called h orizontal frequen cy.
199 Specifications 12 12 Specifications 12.4 License TheaterSound HD, SRS and symbol are trade marks of SRS Labs, Inc. TheaterSou nd HD techno logy is incorp orated unde r license form SRS Lab, In c. Manufactur ed under lice nse from Do lby Labora tories.
200 Appendix Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.sam sung.com CANADA 1-800-SAMSUNG (7 26-7864) h ttp://www.
201 Appendix Appendix EUROPE ALBANIA 42 27 5755 http://www. samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www. samsung.co m BELGIUM 02-2 01-24-18 http://www.sam sung.com/be (Dutch) http://www. samsung.co m/be_fr (French) BOSNIA 05 133 1999 http://www.
202 Appendix Appendix PORTUGAL 808 20 - SAMSUNG (808 20 7267) http://www. samsung.co m RUMANIA From landlin e : 08010-SAMSUNG (7267864) From landline & mobile : (+40) 21 206 01 10 http://www. samsung.co m SERBIA 0700 Samsung (0700 726 78 64) http://www.
203 Appendix Appendix UKRAINE 0-800-502-00 0 http://www.samsu ng.com/ua http://www. samsung.co m/ ua_ru BELARUS 810-800-5 00-55-500 http://ww w.samsung.co m MOLDOVA 00-800-500-55-500 http://w ww.samsung.com ASIA PACIFIC AUSTRALIA 1300 36 2 603 http://www.
204 Appendix Appendix MIDDlE EAST IRAN 021-8255 http:/ /www.samsung .com OMAN 800-SAMSUNG (7 26-7864) http://www.samsung.com KUWAIT 183-2255 http://www.sam sung.com BAHRAIN 8000- 4726 http://www.samsu ng.com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.
205 Appendix Appendix Responsibility for the Pay Se rvice (Cost to Customers) When the service is requested, in spite of in warra nty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustme nt, Explanation, Re-installation and etc .
206 Appendix Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality z To enjoy the op timum picture quality, go to Control Panel on your PC and ad just the resolu tion and refresh rate as follows. The picture qual ity of TFT- LCDs may degrade if th e optimum resolution is not selected.
207 Appendix Appendix Prevention of Afterim age Burn-in What is afteri mage burn-in? Afterimage bu rn -in should not occur wh en the LCD pa nel is ope rating norma lly.
208 Appendix Appendix Power off th e product for 2 hours after using it for 1 2 hours. (ME32B / ME40B / M E46B / ME55B / UE46A / UE55A) Go to Display Prop erties > Power Su pply on your PC a nd set the pr oduct to pow er off as required. Using a s creen saver is r ecommen ded.
209 Appendix Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Correct Disposal of batteries in this product (Applicable in the European Union and other European .
210 Appendix Appendix Terminology OSD(On Screen Display) On screen display (O SD) allows you to co nfigure on-screen settings to optim ize the picture qua lity as required. It allows you to change t he screen br ightness, tint, size and ma ny other s ettings us ing menus displayed on the scr een.
211 Appendix Appendix Resolution Resolution is the nu mber of horizo ntal pixels and ve rtical pixels that f orm a screen. It represents t he level of display detail. A higher reso lution disp lays a greate r amount of informatio n on the sc reen and is su itable for performing mult iple tasks at the same time.
Index 212 Index Numerics 3D Mode 107 3D Video Sy nc 157 A Appendix 200 B Batteries 29 C Changing the Res olution 57 Connecting and Using a PC 54 Connecting to a Video Device 60 Connection Using an IR .
An important point after buying a device Samsung ME40B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung ME40B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung ME40B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung ME40B you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung ME40B will certainly help you make a decision on the purchase.
If you already are a holder of Samsung ME40B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung ME40B.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung ME40B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung ME40B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
