Instruction/ maintenance manual of the product MD32C Samsung
Go to page of 265
LFD DISPLA Y User Manual The color and the appearance may diff er depending on the product, and the specifications are subject to change without prior notice to improv e the per formance.
T able of con tents Before U sing the Pr oduc t Cop yright 7 Safety Precautions 8 Symbols 8 Cleaning 8 Storage 9 Electricity and S afety 9 Installation 10 Operation 12 Pr eparations Checking the Conte.
T able of con tents T ool Settings 82 Other Functions 85 Group Management 86 Schedule Management 88 T roubleshooting Guide 90 Screen Adjustmen t Picture Mode 92 If the input source is PC, DVI 92 If th.
T able of con tents S ystem Setup 124 Initial settings (Setup ) 124 Multi Contr ol 125 Configuring settings for Multi C ontrol 125 Time 126 Clock Set 126 Sleep Timer 127 On Timer 128 Off T imer 129 Ho.
T able of con tents Using T o ols in Channel 162 Edit F avorites 162 Rename Channel 164 Add / Delete 164 Select All / Deselec t All 164 Adding a fav orite channel 165 Deleting a Channel from a list of.
T roubleshooting Guide Requirements Before C ontacting Samsung Customer Service C enter 241 T esting the Product 241 Checking the Resolution and Frequency 241 Check the followings .
7 Befor e U sing the P roduc t Chapter 01 C opyright The contents of this manual are subject to change without notice to impr ove quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual . Use or reproduction of this manual in parts or entirety without the authorization of Samsung Elec tronics is prohibit ed.
8 Safety Pr ecautions Caution RISK OF ELEC TRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELEC TRIC SHOCK , DO NOT REMOVE COVER. (OR BA CK ) THERE ARE NO USER SER VICEABLE P ARTS INSIDE. REFER ALL SER VICING T O QUALIFIED PERSONNEL. This symbol indicates that high voltage is pr esent inside.
9 Stor age Due to the characteristics of high-glossy products, using a UV humidifier nearby may create white- colored stains on the product. ― Contact Customer Service Center if the inside of the product needs cleaning (ser vice fee will be charged).
10 Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord pr ovided with your product by Samsung. Do not use the power cord with other pr oducts. • A fire or electric shock may result.
11 ! Bend and keep par t of the outdoor T V antenna cable hanging downwards (the part inside the room) to prevent rainwater fr om entering the product.
12 Caution ! Do not drop the product while moving. • Pr oduct failure or personal injur y may result. Do not set down the product on its front. • The screen may become damaged . When installing the product on a cabinet or shelf , make sure that the bottom edge of the front of the pr oduct is not protruding.
13 Do not leave heavy objects or items that children like (toys, sw eets, etc.) on top of the product. • The product or heavy objects may fall as children try to reach for the toys or sweets r esulting in a serious injur y. ! During a lightning or thunderstorm, power off the product and remove the power cable.
14 Caution ! Leaving the scr een fixed on a stationar y image for an extended period of time may cause afterimage burn-in or defective pixels. • Activate power-sa ving mode or a moving-picture screen saver if you will not be using the product for an extended period of time.
15 Be careful that children do not place the battery in their mouths when removed fr om the remote control . Place the batter y in a location that children or infants cannot reach. • If children have had the battery in their mouths, consult your doctor immediately .
16 P repar ations Chapter 02 Checking the Cont ents Removing the P ackaging (for MD32C MD40C and MD46C models only) ― The following images ar e for ref erence only . Real-life situations may differ fr om what is shown in the images. 1 Remove the black locking device at the bottom of the box.
17 Removing the P ackaging (for MD55C models only) ― The following images ar e for ref erence only . Real-life situations may differ fr om what is shown in the images. 1 Remove the black locking device at the bottom of the box. 3 2 1 2 Using the groov es in the box, lift and remove the top of the box.
18 - Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may diff er from the image shown. - A stand is not provided with the product. T o install a stand, you can purchase one separately .
19 Items sold separately - The following items can be pur chased at your nearest retailer . W all-mount K it Stand RS232C-Stereo cable ( P. 57 ) DVI cable ( P. 45 ) HDMI-DVI cable ( P. 46 ) HDMI cable ( P. 46 ) Video cable ( P. 49 ) Component cable ( P.
20 P ar ts C ontrol P anel POWER ON P anel Ke y Speaker Remote sensor ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to impr ove quality. P anel Key Buttons Description Po wer on the product.
21 ― If you press the button on the panel key ( P. 20 ) when the product is turned on, the control menu will be displayed . Con trol menu CONTENT Return Buttons Description Sou rce Select the connected input source. Move the panel key right to select S ource in the control menu.
22 Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality .
23 Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places . ― The locking device shape and lock ing method depend on the manufacturer . Refer to the user guide provided with your anti-theft locking device for details.
24 - Remote control button functions may differ for diff erent products. Remote C ontrol ― Using other display devices in the same space as the remote contr ol of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not supported on the product.
25 TOOLS INFO MagicInfo 3D LOCK PC A DVI B HDMI C DP D EXIT RETURN Display information about the current input source. Move to the upper , lower , left or r ight menu, or adjust an option's setting. Confirm a menu selection. Exit the current menu.
26 Adjusting the OSD with the Remote C ontrol Buttons Description 1 Open the OSD menu. 2 Select an option you want to change settings for from Picture , Sound , Channel , Network , System , and Support on the lef t side of the OSD menu. 3 Change settings as desired.
27 Befor e Installing the Product (Installation Guide) 15 ˚ T o prevent injur y , this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount.
28 A B C E Figur e 1.3 Side view D D Figur e 1.2 Side view Installation on an Indented W all ― Contact Samsung Customer Service Center for further details.
29 Installing the W all M ount Installing the W all Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. F or detailed information on installing the wall mount, see the instructions provided with the wall mount. We r ecommend you contact a technician for assistance when installing the wall mount bracket.
30 Unit: mm (inches) Model name VESA scre w hole specs (A * B) in millimeters Standard Screw Quantity MD32C 200 × 200 / 7.9 × 7.9 M6 4 MD40C MD46C 400 × 400 / 15.7 × 15.7 M8 MD55C ― Do not install your Wall Mount Kit while your product is turned on.
31 Remote C ontr ol (RS232C ) Cable C onnection RS232C Cable Interface RS232C (9 pins) Pin T xD (No.2), RxD (No .3), GND (No.5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow c ontr.
32 • RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 1 5 9 6 -P2- 1 2 3 -P1- -P1- -P1- -P2- -P2- F emale Rx Tx Gnd 2 3 5 --------> <-------- ---------- 3 2 5 Tx Rx Gnd STEREO PL UG (3.
33 • Connector : RJ45 Direct LAN cable (PC to HUB) RJ45 RJ45 MDC HUB P1 P1 P2 P2 Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ T X- 2 <--------> 2 T X- RX+ 3 <--------> 3 RX+ R X- 6 &.
34 C onnec tion • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT • Connection 2 RJ45 RJ45 • Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT.
35 C ontrol C odes V iewing control sta te (Get c ontrol command) Header Command ID Data length Checksum 0xAA Command type 0 Con trolling (Set control c ommand) Header Command ID Data length Data Checksum 0xAA Command type 1 V alue Command N o.
36 P ower c ontrol • F unction A product can be powered on and off using a PC. • Viewing power state ( Get Power ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting pow.
37 Input source c ontrol • F unction The input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x1.
38 Screen mode contr ol • F unction The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the V ideo W all function is enabled.
39 PIP On/Off control • F unction The PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if V ideo W all is set to On . ― This function is not available in MagicInfo .
40 V ideo W all Mode Con trol • F unction Video W all mode can be ac tivated on a product using a PC. This control is only available on a pr oduct whose Video W all is enabled.
41 V ideo W all On • F unction T urn V ideo W all on or off on the product from your comput er . • Get Video W all On/O ff Status Header Command ID Data length Checksum 0xAA 0x84 0 • Set Video W all On/O ff Header Command ID Data length Data Checksum 0xAA 0x84 1 V .
42 10x10 V ideo W all M odel 123456789 10 11 12 13 14 15 O 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0.
43 10x10 V ideo W all Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ... 99 0x63 100 0x64 • Ack Header C ommand ID Data length Ack/Nak r-CMD Val1 Val2 Checksum 0xAA 0xFF 4 'A' 0x89 W.
44 C onnec ting and Using a Sour ce De vice Chapter 03 Befor e Connecting Check the following bef ore you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders , speakers, set top boxes and DVD/Blu-ray Disc players .
45 C onnec ting to a PC • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC.
46 C onnec tion Using an HDMI-DVI C able ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC.
47 Changing the Resolution ― Adjust the resolution and r efresh rate in Control P anel on your PC to obtain optimum picture quality . ― The picture quality of TFT -L CDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windo ws XP Go to Contr ol Panel Display Settings , and change the resolution.
48 Changing the Resolution on Windo ws 7 Go to Contr ol Panel Display Screen Resolution , and change the resolution. Changing the Resolution on Windo ws 8 Go to Settings Control Panel Display Screen Resolution , and change the resolution.
49 C onnec ting to a V ideo Devic e • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • Y ou can connect a video device to the product using a cable. ― Connecting par ts may differ in diff erent products.
50 C onnec tion Using an HDMI-DVI C able ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. T o resolve this, additionally connect an audio cable to the audio ports on the product and video device.
51 C onnec ting to an A udio Sy stem ― Connecting par ts may differ in diff erent products. A UDIO OUT C onnec ting the antenna ― Connecting par ts may differ in diff erent products. ― When the product is powered on f or the first time, basic settings are configured aut omatically.
52 C onnec ting the network bo x (Sold separat ely) ― F or details on how to connect to a network box, refer to the user's manual pr ovided with the network box upon purchase. MagicInfo T o use MagicInfo , a network box (sold separately) must be connected to the product.
53 MagicInfo Setup Wizard - v .1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: Subnet mask: Default gateway: 192 . 168 . 0 . 102 255 . 255 . 255 . 0 192 . 168 . 0 . 1 Obtain DNS server address automatically Use the following DNS server address: Preferred DNS server: Alternate DNS server: 10 .
54 Changing the Input sourc e S ou rce MENU m → Support → Contents Home → Source → ENTER E Source TV HDMI AV Component PC DVI --- PC --- --- --- T ools Return - The displayed image may diff er depending on the model. Sou rce allows you to select a variety of sources and change source device names.
55 U sing MDC Chapter 04 C onguring Settings for M ulti C ontrol MENU m → Syste m → Multi Control → ENTER E Assign an individual ID to y our product. C onguring settings for M ulti C ontrol • ID Setup Assign an ID to a set. (Range: 0~99) Pr ess ▲ / ▼ to select a number, and pr ess E .
56 MDC Pr ogr am Installation/Uninstallation Installation 1 Inser t the installation CD into the CD-ROM dr ive. 2 Click the MDC Unified installation program. 3 Select a language for installation. Next, click " OK ". 4 When the " W elcome to the InstallShield Wizar d for MDC_Unified " screen appears, click " Next ".
57 Wha t is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. C onnec ting to MDC Using MDC via RS-232C (serial data communica tions standards) An RS-232C serial cable must be connected to the serial por ts on the PC and monitor .
58 Using MDC via Ethernet Enter the IP for the primary display device and connect the de vice to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 por t on the product and the LAN por ts on the HUB.
59 Connection using a cross LAN cable ― Multiple products can be connected using the RS232C IN / OUT por t on the product. RS232C OUT RJ45 Monitor 1 Monitor 2 Computer.
60 C onnec tion Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MA C, and Connection Type), connection status, Set ID Range , and detected devices.
61 U ser L ogin Launching the program displays the user log in window. The initial login ID ( passwor d : admin ) and password ( Auto L ogin : admin ) are set to admin . ― After logging in for the first time , make sure to change the password to ensur e securit y .
62 A uto S et ID Auto Set ID f eature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 t o 99, and then finally to Set ID 0.
63 Cloning Using the Cloning featur e, you can copy the setting of one LFD and apply it to multiple selected LFDs. Y ou can select specific tab categories or all tab categories for cloning, using the cop y setting option window. ― T o delete the settings you have configured , click the Paste Settings button.
64 C ommand Retr y This featur e is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply fr om an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10.
65 Getting Star ted with MDC 1 T o star t the program, click Start → Programs → Samsung → MDC Unified . The login window appears after the MDC prog ram is launched. Enter the user ID and password . • The default user ID and password ar e admin .
66 Main Screen Lay out 4 3 2 1 6 5 1 Menu Bar Change the status of a display device or the properties of the program. 2 Device Cat egor y View a list of connected display devices or device groups . 3 Schedule Category View a list of schedules for display devices .
67 V olume 1 2 3 ― The volume can be changed or the sound can be muted only f or displays that are turned on. V olume • Adjust the volume of a selected display . • The volume can be adjusted using the slider bar in the range of 0 to 100. Mute • Enable or disable Mute for a selected display .
68 User L ogin User Settings • Add, delete or edit log in information. Logout • Log out fr om the current user account as follows. • Click Logout . The message " Do you w ant to log admin out? " is displayed • Click Ye s . The user login window appears.
69 Color - Color and T int (G/R) are not available if the input sour ce is PC . - C olor , T int ( G/ R) , C olor T one and C olor T emp . ar e not available if both PC S ource and V ideo S ource are selected. Color • Adjust the colors for the selected display device .
70 MPEG Noise Filt er Reduces MPEG noise to provide impr oved picture quality. • Off / Low / M edium / High / Auto Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bott om areas of the video image to provide a mor e immersive viewing experience.
71 Adv anced fea tures 3D Con trol 3D M ode Select the 3D input format. 3D L/ R C hange Swap the left and right pictures. 3D → 2D Displays the image for the left eye only . 3D A uto V iew If you set 3D Auto V iew to Message Notice , a pop up message window appears when the product receives a 3D signal .
72 Advanc ed Settings D ynamic C ontrast Adjust the screen contrast. G amma C ontrol Adjust the primary color intensit y . RGB O nly M ode Displays the Red , Green and Blue color for making fine adjustments to the hue and saturation. F lesh T one Emphasize pink “Flesh T one.
73 Sound Adjustment - The Bass or T reble item will be disabled if the item is not supported by the selected set. Y ou can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. B ass • Adjust the bass for the selected display .
74 F ormat • Select the format to display the split screen. Full Natural H • Select the number of horizontal display devices. • A maximum of 15 displays can be arranged in a row . ― A maximum of 6 can be assigned to V if 15 is assigned t o H .
75 General User A uto Color • Automatically adjust the screen colors . ― Available only in PC mode. Auto P ower • Set the product to automatically power on. Standby C ontrol • Set the standby mode to activate if an input source is not detected.
76 Security Safety Lock • Lock the on-scr een menus. ― T o unlock the menus, set Safety Lock to Off . Button Lock • Lock the buttons on the displa y device. ― T o unlock the buttons, set Button Lock to Off . OSD Display Source OSD • Select whether to display a message when the So urce is changed.
77 Time C lock S et Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer O n T imer • Repeat : Specify the period for which you want to r epeat the selected Timer .
78 Holiday Management Holiday Management allows you t o prevent devices that are set to be power ed on by the Timer from turning on at a specified date. ― The Holiday Management function can be enabled or disabled in the Timer settings menu . • Add : Y ou can specify holidays.
79 S creen S aver ― Period (Hour) and T ime (Sec) can be configured when Repeat is selected. ― Start Time and End Time can be configur ed when I nter val is selected. This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time.
80 S afety S creen The Saf ety Screen func tion can be used to prevent scr een burn-in when a stationar y image displays on the screen of a display device for an extended period of time. L amp C ontrol Lamp Con trol is used to adjust the backlight to reduce power consumption.
81 Tick er Input tex t while a video or image is displayed and display the t ex t on the screen. Ticker Enable or disable Ticker . • Off / On Message Enter a message to display on the scr een. Timer Set the Start Time and End Time to display a message ( Message ).
82 T ool Settings Security • Panel C ontrol : T urn on or off the screen of a display device. • Remote Contr ol : Enable or disable the remote control. Reset • Reset Picture : Reset the screen settings. • Reset Sound : Reset the sound settings.
83 Edit C olumn O ptions Configure the settings f or the items that will be displayed on the list of displays. • Language : Select a language to use in the MDC program. After selecting a language, restart the MDC program to use the selected language.
84 M onitor W indow A window appears showing details f or data transfer between the computer and display devices. • Filt er View the program inf ormation.
85 Other F unc tions Resizing a Window Place the mouse pointer on a corner of the program windo w. An arro w will appear . Move the arrow to customiz e the size of the program window .
86 Group Management Creating Gr oups Create gr oups and manage the list of sets on a group basis. ― Duplicate group names cannot be used . 1 Right-click and selec t Group Edit in the display device list section on the lef t side of the program window .
87 • Add on the sub lev el : Create a sub- group under the selected gr oup. 3 Enter the group name . Deleting Groups 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Delet e . 3 Click Ye s . The group will be deleted .
88 Renaming Groups Rename 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Rename . 3 If a cursor appears in the old group name, enter a new gr oup name. Schedule Management Creating Schedules Create and r egister a schedule on a group basis.
89 2 Click the Add button. The Add Schedule window will appear . 3 Click Add below the Device Group item, and select the group you want to add a schedule t o. 4 Select Date&Time / Action and click OK . The schedule will be added and a list of schedules will appear in the set list window .
90 T roubleshooting Guide - This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted fr om nearby electronic devices. Issue Solution The display y ou want to contr ol does not appear on the system inf ormation char t.
91 How display pr oper ties are shown when multiple displa ys are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displa yed. 3 When two displays are selected (e.
92 Screen A djustment Configure the Picture settings ( Backlight , Color T one , etc.). - The layout of the Picture menu options may vary depending on the product. Chapter 05 P ic ture M ode MENU m → Picture → Picture Mode → ENTER E Select a picture mode ( Picture Mode ) suitable for the environment wher e the product will be used.
93 B acklight / C ontr ast / B righ tness / S harpness / C olor / T int ( G/R ) MENU m → Picture → ENTER E · · · · · · Picture Picture Mode Backlight Contrast Brightness Sharpness Color Tint ( G/R) Information 60 70 45 50 50 G 50 R 50 - The displayed image may diff er depending on the model.
94 S cr een A djustment MENU m → Picture → Screen Adjustment → ENTER E · Screen Adjustmen t Picture Size 16:9 Zoom/P osition PC Screen Adjustment Resolution Selec t O - The displayed image may diff er depending on the model. choose size and aspect ratio picture displayed on screen.
95 Picture Sizes a vailable by Input Source . Input Source Picture Size AT V 16:9 , Zoom1 , Z oom2 , 4:3 AV , Component (480i, 480p) 16:9 , Zoom1 , Zoom2 , 4:3 , C ustom DT V (1080i) 16:9 , Smart View.
96 P osition · Screen Adjustmen t Picture Size P osition PC Screen Adjustment Resolution Selec t Zoom1 O - The displayed image may diff er depending on the model. Adjusts the picture position. P osition is only available if Picture Size is set to Z oom1 , Zoom2 , Wide F it , Screen Fit or Custom .
97 PC S creen A djustmen t · Screen Adjustmen t Picture Size Zoom/P osition PC Screen Adjustment Resolution Selec t Custom O - Available in PC mode only . - The displayed image may diff er depending on the model. • Coarse / F ine Removes or reduces picture noise .
98 A uto A djustment MENU m → Picture → Auto A djustment → ENTER E Picture Auto A djustment - Available in PC mode only . - The displayed image may diff er depending on the model. Adjust frequency values/positions and fine tune the settings automatically .
99 A spec t R atio MENU m → Picture → Aspect Ratio → ENTER E · Picture Rotation Aspect Ratio P or trait F ull Screen - The displayed image may diff er depending on the model. Set the rotated screen t o be either full screen or original. • F ull Screen : Display the rotated screen in full scr een.
100 A dvanc ed S ettings MENU m → Picture → Advanc ed Settings → ENTER E Advanc ed Settings Dynamic Contrast Black T one Flesh T one RGB Only Mode Color Space White Balance 10p White Balance Medium O 0 O Native O - The displayed image may diff er depending on the model.
101 Advanc ed Settings Dynamic Contrast Black T one Flesh T one RGB Only Mode Color Space White Balance 10p White Balance Medium O 0 O Native O - The displayed image may diff er depending on the model. D ynamic C ontrast Adjust the screen contrast.
102 Advanc ed Settings White Balance 10p White Balance Gamma Motion Lighting O 0 O - The displayed image may diff er depending on the model. W hit e B alance Adjust the color temperature f or a more natural picture. • R-Offset / G- Offset / B-O ffset : Adjust each color’ s (red, gr een, blue) dark ness.
103 P ic ture O ptions MENU m → Picture → Picture Options → ENTER E Picture Options Color T one Color T emp. Digital Noise F ilter MPEG Noise F ilter HDMI Black Lev el F ilm Mode Auto Motion Plus Standard 10000K O O Normal O O - The displayed image may diff er depending on the model.
104 Picture Options Color T one Color T emp. Digital Noise F ilter MPEG Noise F ilter Standard 10000K O O - The displayed image may diff er depending on the model. C olor T one If the input source is PC , DVI , or HDMI (PC connection). • Off / Cool / Standard / W arm If the input source is AV , Component , HDMI or TV .
105 Picture Options HDMI Black Lev el F ilm Mode Auto Motion Plus Dynamic Back light Normal O O O - The displayed image may diff er depending on the model.
106 Picture Options HDMI Black Lev el F ilm Mode Auto Motion Plus Dynamic Back light Normal O O O The displayed image may diff er depending on the model. D ynamic B acklight Automatically adjust the backlight to provide the best possible screen contrast under the curr ent conditions.
107 Sound Adjustmen t Configure the sound ( Sound ) settings for the pr oduct. Chapter 06 S ound M ode MENU m → Sound → Sound Mode → ENTER E 끄기 Sound Sound Mode Sound Eect Broadcast Audio Options Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model.
108 S ound E ec t MENU m → Sound → Sound Effect → ENTER E Sound Sound Mode Sound Eect Broadcast Audio Options Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model. Configure your pr eferred sound effect f or output sound.
109 B r oadcast A udio O ptions MENU m → Sound → Broadcast Audio Options → ENTER E - The displayed image may diff er depending on the model. • Pref erred Language (for digital br oadcasts) Use.
110 S peak er S ettings MENU m → Sound → Speaker Settings → ENTER E Sound Sound Mode Sound Eect Broadcast Audio Options Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model.
111 R eset S ound MENU m → Sound → Reset Sound → ENTER E Sound Sound Mode Sound Eect Broadcast Audio Options Speaker Select Reset Sound Standard - The displayed image may diff er depending on the model. The displayed image may diff er depending on the model.
112 C hannel Configure the Channel settings f or the product. Chapter 07 A ntenna MENU m → Channel → Antenna → ENTER E 끄기 Channel Antenna Auto P rogram Clear Scrambled Channel F ine T une Crosstalk Noise Reduction Cable On - The displayed image may diff er depending on the model.
113 A uto P rogra m MENU m → Channel → Auto P rogram → ENTER E Channel Antenna Auto P rogram Clear Scrambled Channel F ine T une Crosstalk Noise Reduction Cable On - The displayed image may diff er depending on the model. - Available in TV mode only .
114 C lear S cr ambled C hannel MENU m → Channel → Clear Scrambled Channel → ENTER E Channel Antenna Auto P rogram Clear Scrambled Channel F ine T une Crosstalk Noise Reduction Cable On - The displayed image may diff er depending on the model. - Available in TV mode only .
115 F ine T une MENU m → Channel → Fine T une → ENTER E Channel Antenna Auto P rogram Clear Scrambled Channel F ine T une Crosstalk Noise Reduction Cable On - The displayed image may diff er depending on the model.
116 C rosstalk N oise R educ tion MENU m → Channel → Crosstalk Noise Reduction → ENTER E Channel Antenna Auto P rogram Clear Scrambled Channel F ine T une Crosstalk Noise Reduction Cable On - The displayed image may diff er depending on the model.
117 Network Chapter 08 C onnec ting to a Wir ed Network There are thr ee ways to attach your product to your LAN using cable . • Y ou can attach your pr oduct to your LAN by connecting the LAN por t on the back of your product to an external modem using a LAN cable.
118 • Depending on how your network is configured, you ma y be able to attach your product to your LAN by connecting the LAN por t on the back of your product directly to a network wall outlet using a LAN cable. See the diagram below . Note that the wall outlet is attached to a modem or router elsewher e in your house.
119 3 On the dialog that appears, click the Support tab. 4 On the Support T ab, click the Details button. The Net work connection values are displayed. How to set up manually 1 Go to the Network Settings screen. Select Start , press E , and then press E again.
120 ― If your router , modem, or device is not certified, it may not connect to the product via the “Samsung Wireless LAN adapter” . ― Ensure the product is turned on befor e you connect the “Samsung W ireless LAN adapter ” . ― Connection Methods: Y ou can setup the wireless network connection in three ways.
121 How to set up manually 1 Go to the Network Settings screen. Select Start , press E . 2 The Network function searches for a vailable wireless networks. When done, it displays a list of the available networks. 3 In the list of networks, press the ▲ or ▲ button to select a network , and then press the E button twice.
122 N etw ork S tatus MENU m → Network → Network Status → ENTER E Y ou can check the current network and Internet status. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. 00 : 12 : fb : df : 29 : 76 Network Status Y our wireless network and Internet connection are setup and ready to use .
123 S oft AP MENU m → Network → Soft AP → ENTER E Using this function, you can connect the product on your mobile devices if your mobile devices do not support Wi-Fi Direct . Set the options for connection of Wi-F i device. • Soft AP T urns on or off the Sof t AP .
124 S yst em Chapter 09 S etup MENU m → Syste m → Setup → ENTER E Setup Setup Multi Control Time Menu Language Rotate Menu Eco Solution Caption English Landscape O - The displayed image may diff er depending on the model.
125 M ulti C ontrol MENU m → Syste m → Multi Control → ENTER E Multi Contr ol ID Setup ID Input MDC Connection 00 -- RS232C MDC - The displayed image may diff er depending on the model. C onguring settings for M ulti C ontrol • ID Setup Assign an ID to a set.
126 T ime MENU m → Syste m → Time → ENTER E 끄기 Time Clock Set Sleep Timer On Timer O Timer Holiday Management O - The displayed image may diff er depending on the model. Y ou can configure Clock Set or Sleep T imer . Y ou can also set the product to automatically turn on or off at a specified time using the Timer function.
127 DST • Off / On Switches the DST (Daylight Saving Time) function on or off. ― This function is only available when the Clock Mode is set to Auto . S leep T imer Automatically shuts off the product after a preset period of time. ( Off / 30 min. / 60 min.
128 Time On Timer O Timer Holiday Management - The displayed image may diff er depending on the model. On T imer Set On Timer so that your pr oduct tur ns on automatically at a time and on a day of your choosing . The power is turned on with the specified volume or input source .
129 Time On Timer O Timer Holiday Management - The displayed image may diff er depending on the model. O T imer Set the off timer ( Off Timer ) by making a selec tion from one of the seven options . ( Off Timer1 ~ Off Timer7 ) ― Y ou must set the clock befor e you can use Off Timer .
130 M enu L anguage MENU m → Syste m → Menu Language → ENTER E System Time Menu Language Rotate Menu Eco Solution Caption English Landscape O - The displayed image may diff er depending on the model. Set the menu language. ― A change to the language setting will only be applied to the onscreen menu displa y.
131 R otate M enu MENU m → Syste m → Rotate Menu → ENTER E System Time Menu Language Rotate Menu Eco Solution Caption English Landscape O - The displayed image may diff er depending on the model. Configure the menu scr een. • Landscape : Display the menu in landscape mode (default).
132 E co S olution MENU m → Syste m → Eco Solution → ENTER E Eco Solution Energy Saving Eco Sensor No Signal P ower O Auto P ow er O O O 15 min. O - The displayed image may diff er depending on the model. E nergy S aving Reduce the power consumption by adjusting the screen brightness.
133 C aption MENU m → Syste m → Caption → ENTER E Caption Caption Caption Mode Digital Caption Options O - The displayed image may diff er depending on the model. C aption Y ou can switch the caption function on or off . If captions are not available, they will not be displayed on the scr een.
134 Caption Caption Caption Mode Digital Caption Options O - The displayed image may diff er depending on the model. D igital C aption O ptions (digital channels only) Configure the subtitle settings such as size and color . Adjusts the each option.
135 S ecurity MENU m → Syste m → Security → ENTER E Securit y Safety Lock Button Lock Pr ogram Rating Lock Change PIN O O - The displayed image may diff er depending on the model. Every time you access the Security func tions, the PIN screen will appear and the default PIN number is "0-0-0-0" (default password: 0 - 0 - 0 - 0).
136 • All : Lock all T V ratings. / FV : F antasy violence / V : Violence / S : Sexual situation / L : Adult Language / D : Sexually Suggestive Dialog ― T o block cer tain content, you select a lock , and press E ( That is, you “ click it” .).
137 • Canadian F rench Rating : Y ou can block T V programs based on their F rench Canadian rating. C anadian French Rating displays a column with locks and the following ratings categories . G : General / 8 ans+ : Programming generally consider ed acceptable for children 8 years and ov er to watch on their own.
138 PIP MENU m → Syste m → PIP → ENTER E System PIP Auto Pr otection Time Screen Burn Pr otection Ticker Video W all O O O - The displayed image may diff er depending on the model. - F or PIP sound, ref er to the S ound S elect instructions.
139 A uto P r otec tion T ime MENU m → Syste m → Auto Prot ection Time → ENTER E System Auto Pr otection Time Screen Burn Pr otection Ticker Video W all Source A utoSwitch Settings O O - The displayed image may diff er depending on the model.
140 S cr een B urn P r otec tion MENU m → Syste m → Screen Burn Protection → ENTER E Screen Burn Pr otection Pix el Shift Timer Immediate Display Side Gray O O O O - The displayed image may diff er depending on the model.
141 Screen Burn Pr otection Pix el Shift Timer Immediate Display Side Gray O O O O - The displayed image may diff er depending on the model. T imer Y ou can set the timer for Scr een Burn Protection . The Pix el Shift feature stops automatically after a specified period of time.
142 Screen Burn Pr otection Pix el Shift Timer Immediate Display Side Gray O O O O - The displayed image may diff er depending on the model.
143 T icker MENU m → Syste m → Ticker → ENTER E System Auto Pr otection Time Screen Burn Pr otection Ticker Video W all Source A utoSwitch Settings O O - The displayed image may diff er depending on the model. Input text while a video or image is displayed and display the text on the screen.
144 V ideo W all MENU m → Syste m → Video W all → ENTER E · · · · Video W all Video W all F ormat Horizontal V er tical Screen P osition On F ull 1 1 - The displayed image may diff er depending on the model. - The V ideo W all option is only enabled when PIP is set to O .
145 · · · · Video W all Video W all F ormat Horizontal V er tical Screen P osition On F ull 1 1 - The displayed image may diff er depending on the model. V er tical This function automatically divides the screen according to the specified number of v er tical displays.
146 S ou rce A u to S witch S ettings MENU m → Syste m → Source AutoS witch Settings → ENTER E · · · Source A utoSwitch Settings Primary Source Recovery Primary Source Secondar y Source Source Aut oSwitch On O All TV - The displayed image may diff er depending on the model.
147 G ener al MENU m → Syste m → General → ENTER E General Max. Po wer Saving Game Mode BD Wise Menu T ransparency Sound F eedback Standby Con trol Lamp Schedule On O On Medium O O Auto - The displayed image may diff er depending on the model.
148 General Sound F eedback Auto P ow er Standby Con trol Lamp Schedule OSD Display P ower On Adjustment T emperature Control O O Auto O 0 sec 77 - The displayed image may diff er depending on the model. S ound F eedback Y our product gives sound f eedback when you use product.
149 General Sound F eedback Auto P ow er Standby Con trol Lamp Schedule OSD Display P ower On Adjustment T emperature Control O O Auto O 0 sec 77 - The displayed image may diff er depending on the model. OSD D ispla y Displays or hides a menu item on the screen.
150 A nynet + (HDMI - CEC ) MENU m → Syste m → Anynet+ (HDMI-CEC) → ENTER E Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto T urn O Receiver On Ye s O - The displayed image may diff er depending on the model. - The A nynet + functions do not operate with other manufacturers ’ products.
151 Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto T urn O Receiver On Ye s O - The displayed image may diff er depending on the model. A uto T urn O Setting an Anynet+ Device to turn Off automatically when the product is turned off.
152 T roubleshooting for An ynet+ Pr oblem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ syst em suppor ts Anynet+ devices only . • Check if the Anynet+ device power cor d is properly connected. • Check the Anynet+ device ’ s Video/Audio/HDMI cable connections.
153 Pr oblem Possible Solution The connected device is not displayed. • Check whether or not the device suppor ts Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu .
154 D iv X ® V ideo O n D emand MENU m → Syste m → DivX ® V ideo On Demand → ENTER E System DivX ® Video On Demand On - The displayed image may diff er depending on the model.
155 M agic C lone MENU m → Syste m → Magic Clone → ENTER E Magic Clone Clone to USB Clone F rom USB - The displayed image may diff er depending on the model. Export the product settings to a USB device or load the settings via a USB de vice. This option is useful when assigning the same settings to several pr oducts.
156 R eset A ll MENU m → Syste m → Reset All → ENTER E System Reset All - The displayed image may diff er depending on the model. This option returns all the current settings for a displa y to the default factor y settings.
157 Suppor t Chapter 10 S oft war e U pd ate MENU m → Support → S oftware Update → ENTER E The Software Update menu lets you upgrade your pr oduct soft ware to the latest version. ― Be careful not to turn off the power until the upgrade is complet e.
158 C ontac t S amsung MENU m → Support → Contact Samsung → ENTER E View this information when your pr oduct does not work properly or when you want to upgrade the software. Y ou can find information r egarding our call centers and how to download pr oducts and sof tware.
159 C ontents H ome MENU m → Support → Contents Home → ENTER E Suppor t Conten ts Home - The displayed image may diff er depending on the model. C hannel L ist MENU m → Support → Contents Ho.
160 C hannel M anager MENU m → Support → Contents Home → Channel Manager → ENTER E A 6-1 HD 8-1 DTV 10-1 HD 2 ----- 4 ----- 6 ----- 8 ----- 10 ----- 12 ----- 7-1 HD 9-1 HD 11-1 DTV 3 ----- 5 -.
161 Adding a channel ( C hannel ) 1 Select All on the Channel screen. 2 Select a grayed out channel from All c appears on the left of the selected channel ― More than one channel can be selected. ― T o deselec t a channel, select the channel again.
162 Using T ools in C hannel E dit F av orites MENU m → Support → Contents Home → Channel Manager → T OOLS → Edit F avorit es → ENTER E A A A A A A 9-1 HD 11-1 DTV 3 ----- 5 ----- 7 ----- 9 ----- 7-1 HD 9-1 HD 11-1 DTV 3 ----- 5 ----- 7 ----- 9 ----- A 0~9 D 7-1 HD c Channel Edit F avorites Add Change Fav .
163 A A A A A A 9-1 HD 11-1 DTV 3 ----- 5 ----- 7 ----- 9 ----- 7-1 HD 0~9 A C B 7-1 HD 9-1 HD 11-1 DTV 3 ----- 5 ----- 7 ----- 9 ----- c D Channel Edit F avorites Delete Change order Copy Change Fav .
164 R ename C hannel MENU m → Support → Contents Home → Channel Manager → T OOLS → Rename Channel → ENTER E A channel name can be 5 characters long (for analog channels only). A dd / D elete MENU m → Support → Contents Home → Channel Manager → T OOLS → Add / Delete → ENTER E Add selected channels to F av orites .
165 Adding a fa vorit e channel 1 Select All or Added Ch. . 2 Select a channel. c appears to the left of the selected channel. ― More than one channel can be selected. ― T o deselec t a channel, select the channel again. c disappears. 3 Pr ess TOOLS on the remot e control to open T ools .
166 Deleting a C hannel fr om a list of favorit e channels 1 Select a list of favorite channels from F avorit es 1 ~ F avorites 5 . 2 Select a channel. c appears to the left of the selected channel. ― More than one channel can be selected. ― T o deselec t a channel, select the channel again.
167 M agic I nfo L ite MENU m → Support → Contents Home → MagicInfo Lite → ENTER E ― MagicInfo Lite can also be accessed by pressing MagicInf o Lite/S on the remote control . ― T o launch MagicInfo Lite , select MagicInfo Lite for the Play er Mode on the Sys tem .
168 M agic I nfo V ideowall S MENU m → Support → Contents Home → MagicInfo V ideowall S → ENTER E ― MagicInfo Video wall S can also be accessed by pressing MagicInfo Lite/S on the r emote control. ― T o launch MagicInfo Videowall S , select M agicInfo V ideowall S for the Pla yer Mode on the Syste m .
169 - The input source can also be changed by using the SOURCE button on the remote control . S ou rce MENU m → Support → Contents Home → Source → ENTER E Y ou can display the scr een of a source device connected to the product. Select a source from Sou rce list to display the screen of the selected source .
170 A ll S har e P l ay Chapter 11 Wha t is A ll S hare P l ay ? Play photo , video or music files saved on a storage device. Wir elessly connect a smar tphone to a PC using a wireless network .
171 Compa tible devices with AllShar e P lay • Some types of USB devices, digital cameras and audio devices may not be compatible with the product. • AllShare Pla y is only compatible with USB MSC devices. • MSC device refers t o a Mass Storage Class Bulk-Only T ranspor t device.
172 Using a USB devic e Connecting a USB device 1 T urn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 A message New device connected. appears when the USB device is connected properly .
173 C onnec ting to a PC ov er a network Play photo , video and music files saved on a PC through a network connection in AllShare Play mode .. • F or details on how to configure a network, refer to the section Network Settings . • T o view content saved on the PC, connect the product and PC to the same wireless router and visit http://www .
174 Using the A ll S hare P lay fea tures If you connect the product and a source device such as a cell phone or PC to the same network , you can play media content sav ed on the device such as videos, photos and music. Visit http://www.samsung .com or contact the Samsung Electronics Customer Center f or more information.
175 Using the Basic A ll S hare P lay F eatures MENU m → Support → Contents Home → AllShare P lay → ENTER E AllShare Play / My List / Recently Played What's new Playlist Recently played les will be displayed here. No playlists have been created.
176 Playing Selected F iles 1 Select files from the list of Videos , Photos , or Music files . 2 Pr ess TOOLS on the remot e control and select Selec tion Play . ― The option does not appear if a folder is highlighted b y the cursor . 3 Select files and press Play .
177 My list MENU m → Support → Contents Home → AllShare P lay → My list → ENTER E Access desired content mor e conveniently and quickly. T o play files, select files or a Playlist and press E . • Recently play ed : Display video, photo or music files that wer e recently played .
178 V ideos MENU m → Support → Contents Home → AllShare P lay → Videos → ENTER E Playing a V ideo 1 Select the internal memor y or a USB device. Select files from the list of files. 2 Pr ess the E button or ∂ (Play) button. • The file name appears on the top with its playing time.
179 P hotos MENU m → Support → Contents Home → AllShare P lay → Photos → ENTER E V iewing a Photo (or Slide Sho w) 1 Select the internal memor y or a USB device. Select a file from the list of files. 2 Pr ess the E button. • T o view files manually, one at a time, pr ess the left or r ight arrow buttons .
180 M usic MENU m → Support → Contents Home → AllShare P lay → Music → ENTER E Playing M usic 1 Select the internal memor y or a USB device. Select files from the list of files. 2 Pr ess the E button or ∂ (Play) button. • When the music is playing, you can sear ch using the π (REW ) and µ (FF) button.
181 V ideos / P hot os / M usic Pla y Option menu When playing video or photo files, y ou can press the TOOLS butt on to display an Options menu. Option Name Operations V ideos Photos Music V i ew Sor t music files grouped by F older view , T itle , Ar tist , Album or Genre .
182 Option Name Operations V ideos Photos Music So und Mo de Y ou can change the Sound Mode . c c A u dio L a nguage Y ou can enjoy video in one of supported languages. The function is enabled only when you play stream-type files which support multiple audio formats.
183 Suppor ted Subtitle and AllShar e Play le f ormats Subtitle External Internal • MPEG-4 timed text (.ttxt) • SAMI (.smi) • SubRip (.sr t) • SubViewer (.sub) • Micro DVD (.sub or .txt) • SubStation Alpha (.ssa) • Advanced SubStation Alpha (.
184 Suppor ted music le forma ts F ile Ex tension T ype C odec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC *.flac FLAC FLAC The Seek ( jump) func tion is not suppor ted.
185 F ile Extension Con tainer Video C odec Resolution Fr ame rate (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DIVX 3.
186 M ag ic I n fo L ite Chapter 12 F ile F ormats C ompatible with M agic I n fo L ite play er Read befor e using M agic I nfo L ite play er • The file system supports F A T16, F A T32 and NTFS. • A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played .
187 Con tents F ile Ex tension Con tainer Video C odec Resolution Frame r ate (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DIVX 3.
188 V ideo Audio Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback.
189 Flash P ow er Poin t • Compatible with Flash 10.1 • Flash Animation - Compatible file format : SWF • Recommended resolution : 960 x 540 - Caution Performance comparable to Flash P layer on a.
190 PDF WORD • Compatible document file formats - Extension : pdf • F unctions not suppor ted - Content less than 1 pixel not supported because of per formance degradation issue. - Masked I mage, Tiled Image content not supported. - Content with Rotated T ext, not suppor ted.
191 Appr oving a connected devic e from the ser ver 1 Access the server you have assigned to y our device. 2 Enter your ID and passwor d to log in. 3 Select Device from the top menu bar . 4 Select Lite from the menus on the left. 5 Select Unapproved from the sub-menus of Lite .
192 7 Enter the information requir ed to approve the device. • Device Name : Enter the device name. • Device Group : Select to specify the group . • Location : Enter the current location of the device . ― Pr essing the INFO button on the remote when a network schedule is running will display the details of the schedule.
193 M agic I n fo L ite MENU m → Support → Contents Home → MagicInfo Lite → ENTER E ― T o launch MagicInfo Lite , select MagicInfo Lite for the Play Mode on the System .
194 Local schedule MagicInfo Lite player Network schedule Local schedule Internal Auto Play USB Auto Play Mode Local schedule Server Connected USB Connected Return Close Go to Local Schedule Manager → Click Create to create a schedule → Select the schedule you want to run 1 Select Local schedule in the MagicInfo Lite play er menu screen.
195 USB A uto P lay MagicInfo Lite player Network schedule Local schedule Internal Auto Play USB Auto Play Mode Local schedule Server Connected USB Connected Return Close ― The option is enabled only when there is at least one content item, ex cept for music files, in the " MagicInfoS lide " folder on USB Storage.
196 L ocal S chedule M anager Configure the settings f or playback from Local schedule . Alternatively , select and play content from internal or USB memory according to the customized playback sequence. Registering a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen.
197 4 Select Contents to specify the cont ent you want to play . 1 2 Menu1.jpg Menu2.jpg Contents Internal Memory USB No Items Folder1 OK Deselect All Cancel Duration Return - A maximum of 99 content files can be selected. 5 Select Duration Menu1.jpg 00:00:05 00:00:05 Menu2.
198 6 Select S ave . Selec t the memor y space you want to sav e the content to. Menu1.jpg Menu2 --:-- am ~ --:-- pm No Item --:-- am~ --:-- pm --:-- am ~ --:-- pm No Item Create Time Contents Time Co.
199 3 Select Edit . Menu1.jpg Menu2 Edit Time Contents Time Contents --:-- am~ --:-- pm No Items Save Cancel 12:00 am~ 12:00 pm Time Contents Return Delete --:-- am~ --:-- pm No Items 4 Change the details of the local schedule. Next, select S ave . Deleting a Local schedule ― Ensure at least one Local schedule is r egistered.
200 Running a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the local schedule you want to run.
201 V iewing the details of a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the local schedule you want to view the details of.
202 Cop ying a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select a storage device where the local schedule files to copy are sav ed.
203 C ontent manager Cop ying content 1 Select Content manager in the MagicInfo Lite menu scr een. MagicInfo Lite player MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to copy .
204 Deleting cont ent 1 Select Content manager in the MagicInfo Lite menu scr een. MagicInfo Lite player MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to delete.
205 S ettings Settings Server Network Settings Content Default Duration Content ra tio Image Eect Default content Content La yout Schedule Name Safety Remove USB Return Close Random None Landscape YYYYMMDD - The displayed image may diff er depending on the model.
206 C ontent Default Duration Specify the duration to play content. • Image View er Time , Doc View er Time , PPT Vie wer Time , PDF viewing time , F lash viewing time ― The duration must be at least 5 seconds. C ontent ratio Specify the display aspect ratio by type when playing content.
207 When C ontent is Running V iewing the details of the conten t that is running Information Software Version Device Name Device ID Mode Server USB Schedule download Cancel : A-L UBX GDSP-0100.
208 Changing the settings for the c ontent that is running Picture Mode Sound Mode PIP Background Music Background Music Setting Safety Remove USB Device T ools Standard Standard O O Return - The displayed image may diff er depending on the model.
209 M ag ic I n fo P r emium S Chapter 13 A license needs to be purchased to use MagicInf o Premium S . T o download the soft ware, go to the Samsung homepage at http://www .
210 V ideo Audio Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback.
211 Flash P ow er Poin t PDF • Compatible with Flash 10.1 • Flash Animation - Compatible file format : SWF • Recommended resolution : 960 x 540 - Caution Performance comparable to Flash P layer .
212 WORD T emplate les LFD • Compatible document file formats - Extension : .doc, .docx - Version : Office 97 ~ Office 2007 • F unctions not suppor ted - P age background effect - Some paragrap.
213 Network Schedule Multiframe Playback restrictions • A maximum of two video ( Videos ) files can be play ed. • If PIP mode is enabled, more than one video ( V ideos ) file cannot be played. • More than one Flash file cannot be play ed. • F or Office files (PPT and W ord files) and PDF files, only one file type is supported at a time.
214 Playback restrictions • A maximum of two video ( Videos ) files can be play ed. • If PIP mode is enabled, more than one video ( V ideos ) file cannot be played. • More than one Flash file cannot be play ed. • F or Office files (PPT and W ord files) and PDF files, only one file type is supported at a time.
215 Appr oving a connected devic e from the ser ver 1 Access the server you have assigned to y our device. 2 Enter your ID and passwor d to log in. 3 Select Device from the top menu bar . 4 Select Premium from the menus on the left. 5 Select Unapproved from the sub-menus of Pr emium .
216 7 Enter the information requir ed to approve the device. • Device Name : Enter the device name. • Device Group : Select to specify the group . • Location : Enter the current location of the device . ― Pr essing the INFO button on the remote when a network schedule is running will display the details of the schedule.
217 M agic I n fo P remium S MENU m : T Support C ontents Home MagicInfo Premium S ENTER E ― T o launch MagicInfo Premium S , select MagicInfo Premium S f or the Play Mode on the Syste m . ― Pr ess the MagicInfo Lite/S button on the remote contr ol.
218 Local schedule MagicInfo Premium S P layer Network schedule Local schedule T emplate Player Internal Auto Play USB Auto Play Mode Local schedule Server Connected USB Connected Return Close MagicIn.
219 Internal A uto P lay MagicInfo Premium S P layer Network schedule Local schedule T emplate Player Internal Auto Play USB Auto Play Mode Local schedule Server Connected USB Connected Return Close ― The option is enabled only when there is at least one content item, ex cept for music files, in Internal Memory .
220 L ocal S chedule M anager Configure the settings f or playback from Local schedule . Alternatively , select and play content from internal or USB memory according to the customized playback sequence. Registering a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen.
221 4 Select Contents to specify the cont ent you want to play . 1 2 Menu1.jpg Menu2.jpg Contents Internal Memory USB No Items Folder1 OK Deselect All Cancel Duration Return - A maximum of 99 content files can be selected. 5 Select Duration Menu1.jpg 00:00:05 00:00:05 Menu2.
222 6 Select S ave . Selec t the memor y space you want to sav e the content to. Menu1.jpg Menu2 --:-- am ~ --:-- pm No Item --:-- am~ --:-- pm --:-- am ~ --:-- pm No Item Create Time Contents Time Co.
223 3 Select Edit . Menu1.jpg Menu2 Edit Time Contents Time Contents --:-- am~ --:-- pm No Items Save Cancel 12:00 am~ 12:00 pm Time Contents Return Delete --:-- am~ --:-- pm No Items 4 Change the details of the local schedule. Next, select S ave . Deleting a Local schedule ― Ensure at least one Local schedule is r egistered.
224 Running a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen.
225 V iewing the details of a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Pl.
226 Cop ying a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Player Content ma.
227 T emplate M anager Registering a T emplate 1 Select T emplate Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select Create in the T emplate Manager screen.
228 4 Organize a templat e by inser ting text, video, photo , or PDF files as desired. Crea te Select the position and the background. Use background image Preview Previous Next Cancel - T o load a file or manually enter text, selec t T ext input .
229 5 Select sound or background music. Crea te Select sound or background music. Background Music Preview Previous Next Cancel • If two Videos files are assigned , select the file with the sound you want to use. - If one of the video files includes PIP content, sound from the PIP content can be selected.
230 C ontent manager Cop ying content 1 Select Content manager in the MagicInfo P remium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to copy .
231 Deleting cont ent 1 Select Content manager in the MagicInfo P remium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to delete.
232 S ettings Settings Server Network Settings Content Default Duration Content ra tio Image Eect Default content Content La yout Schedule Name Safety Remove USB Return Close Random None Landscape YYYYMMDD - The displayed image may diff er depending on the model.
233 C ontent Default Duration Specify the duration to play content. ― Image View er Time , Doc View er Time , PPT Vie wer Time , PDF viewing time , F lash viewing time ― The duration must be at least 5 seconds. C ontent ratio Specify the display aspect ratio by type when playing content.
234 When C ontent is Running V iewing the details of the conten t that is running Information Software Version Device Name Device ID Mode Server USB Schedule download Cancel : A-L UBX GDSP-0100.
235 Changing the settings for the c ontent that is running Picture Mode Sound Mode PIP Background Music Background Music Setting Safety Remove USB Device T ools Standard Standard O O Return - The displayed image may diff er depending on the model.
236 M ag ic I n fo V ideow all S Chapter 14 A license needs to be purchased to use MagicInf o Videowall S . T o download the soft ware, go to the Samsung homepage at http://www .samsunglfd.com. T o purchase a license , contact a Customer Ser ver Center .
237 V ideo Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback.
238 Restrictions • Only one video ( Videos ) file can be pla yed per client. ― Different cont ent files can be played on the displays of a video wall.
239 M agic I n fo V ideowall S MENU m → Support → Contents Home → MagicInfo V ideowall S → ENTER E → RETURN R ― T o launch MagicInfo Videowall S , select M agicInfo V ideowall S for the Pla y Mode on the Syste m . ― Pr ess the MagicInfo Lite/S button on the remote contr ol.
240 When C ontent is Running Information Software Version Device Name Device ID USB Cancel : A-L UBX GDSP-0100.18 : Monitor : FF-FF-FF-FF-FF-FF : Connected - The displayed image may diff er depending on the model. Pr ess the INFO button on the remote control .
241 T r oubleshooting Guide Chapter 15 Requirements Bef ore C ontacting S amsung C ustomer Ser vice C enter Before calling Samsung Cust omer Ser vice Center , test your product as f ollows. If the problem persists, contact Samsung Customer Service Center .
242 Check the follo wings. Installation issue (PC mode) The screen keeps swit ching on and o. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are f ound on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC.
243 Screen issue The screen is not clear . The screen is blurry . Adjust Coarse and F ine . Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level . The screen appears unstable and shaky .
244 Screen issue The screen displa y does not look normal. Encoded video content may cause the display to appear corrupted in scenes f eaturing fast moving objects such as in a spor ts event or action video. Low sig nal level or low picture quality may cause the display to appear corrupted.
245 Sound issue There is no sound . Check the connection of the audio cable or adjust the volume. Check the volume. The volume is t oo low . Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program.
246 Sound issue There is audible sound when the v olume is muted. When Speaker Select is set to External , the volume button and mute function are disabled. Adjust the volume f or the external speak ers. Audio settings for main speakers are separat e from the internal speakers on the product.
247 Other issue Ca ption is gray ed out and not selec table. If the selected input source is not TV , Caption cannot be selected from the System menu. Caption can be enabled from a source device . ― Refer to page 133 f or details about the Caption menu.
248 Other issue There is no sound in HDMI mode . Displayed picture colors may not look normal. Video or sound may not be available. This can occur if a source device that only supports an older version of the HDMI standard is connected to the product.
249 Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to C ontrol P anel → Appearance and Themes → D isplay → Settings → Advanc ed → Monitor and adjust the frequency in M onitor Settings .
250 Question Answer How do I set pow ersaving mode? • Windows XP: Set pow er-saving mode in Contr ol Panel → Appearanc e and Themes → Display → Screen Saver Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power -saving mode in Control P anel → Display → Screen Saver Settings or BIOS SE TUP on the PC.
251 Specications Chapter 16 1 Size 2 Display area H V 3 Dimensions ( W x H x D) W D H General Model Name MD32C MD40C P anel Size 32 CLASS (31.5 inches / 80 cm) 40 CLASS (40.0 inches / 101 cm) Display area 698.4 mm (H) x 392.85 mm ( V )/ 27.5 inches (H) x 15.
252 Display Color MD32C / MD40C / MD46C: 1.07B(10bits Dithering) MD55C: 16.7M (8Bits Dithering) Synchronization Horizontal Fr equenc y 30~81 kHz V er tical Fr equenc y 56~75Hz Resolution Optimum resolution 1920x1080@60Hz Maximum resolution 1920x1080@60Hz Maximum Pixel C lock 148.
253 ― Plug-and-Play This monitor can be installed and used with any P lug-and-Play compatible systems. T wo-way data exchange between the monitor and PC system optimiz es the monitor settings. Monitor installation takes place automatically. Ho wever , you can customize the installation settings if desir ed.
254 P o werSav er The power -saving function of this product reduc es power consumption by swit ching off the screen and chan ging the color of the powe r LED if the product is not used f or a specified period of time. The power is not turned off in power -saving mode.
255 Pr eset T iming M odes ― This product can be set to only one resolution f or each screen size to obtain the optimum picture quality due to the nature of the panel . Using a resolution other than the specified resolution may degrade the picture quality .
256 Resolution Horizontal F requency (kHz) V ertical Frequency (Hz) Pix el Clock (MHz) Sync P olarity (H/V ) VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1152 x 864 67.500 75.000 108.000 +/+ VESA, 1280 x 720 45.
257 Appendix Chapter 17 C ontac t SAMSUNG WORLD WIDE ― If you have any questions or comments relating t o Samsung products, please contact the SAMSUNG customer care center . NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung .com CANADA 1-800-SAMSUNG (726-7864) http://www.
258 LA TIN AMERICA COL OMBIA 01-8000112112 Bogotá: 6001272 http:/www.samsung .com/co COST A RICA 0-800-507-7267 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) ECU ADOR 1-800-10-7267 http://www.samsung .com/latin (Spanish) http://www.
259 LA TIN AMERICA URUGU A Y 40543733 http://www.samsung .com VENEZUELA 0-800-100-5303 http://www.samsung .com.
260 Responsibility for the P ay Ser vice ( C ost to C ustomers) ― When the ser vice is requested , in spite of in warranty, we may char ge you for a visit from a service technician in the following cases . Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
261 Optimum Picture Quality and Afterimage Burn-in Pr even tion Optimum Picture Quality • T o enjoy the optimum picture quality, go to Contr ol Panel on your PC and adjust the r esolution and refresh rate as f ollows. The picture quality of TFT -L CDs may degrade if the optimum resolution is not selected.
262 Pr even tion of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally . Normal operation refers t o a continuously changing video pattern.
263 • Avoid combinations of a t ex t Color and background color of contrasting brightness. ― Avoid using g rey as it may contribute to afterimage burn-in.
264 License Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of D olby Laboratories. Ⓡ Manufactured under a license from U .S. Patent No ’ s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853.
265 T erminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above ref ers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progr essive), depending on the scanning method.
An important point after buying a device Samsung MD32C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung MD32C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung MD32C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung MD32C you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung MD32C will certainly help you make a decision on the purchase.
If you already are a holder of Samsung MD32C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung MD32C.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung MD32C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung MD32C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
