Instruction/ maintenance manual of the product RS-750lcd Auto Page
Go to page of 15
RS - 750 lcd PROFESSIONAL REMOTE CAR STARTER WITH ALARM SYSTEM & 2 - WAY LCD COMMUNICATION OPERATION MANUAL THIS PRODUCT IS DESIGNED FOR PROFESIONAL INSTALLATION ONLY.
XT - 75S STANDARD TRANSMITTER OPERATION: (Note: For 2 - Way LCD Transmitter operation, see XT75LCD User Manual ) XT - 75S STANDARD TRANSMITTER Transmitter Button System Function Remark Lock Doors & Arm Syst em - Arm and Noiseless mode Press within 3 seconds.
ACTIVE ARMING – LOCK & ARM 1. Press button on the transmitter. 2. The siren will chirp on ce and parking light will flash once indicating that the system is now armed. The vehicle doors will lock upon arming when interfaced with the security system.
ARMING WHILE DRIVING: (see Alarm Feature I - 6 Programming) Your system can be armed while driving the vehicle! Simply press the button for 2 seconds while the vehicle is running, or the ignition is on. The system will chirp once and then once more to indicate the ignition is on.
Shock Sensor Trigger Ignition Trigger (optional) PIR Sensor TAMPER DISARMING : If the alarm was triggered in your a bsence, when disarming the system, the siren will chirp 4 times and the parking lights will flash 3 times, indicating an intrusion to the security system while you were away from the vehicle.
EXAMPLE: To Override The System With The Password Code 51, you would; 1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm will sound.
TRIGGER THE SYSTEM When armed, your vehicle is protected as follows: 1. Light impacts will trigger th e warn - away signal. A [3] long chirp from siren/horn. 2. Heavy impacts / Doors open / Hood open / Trunk open / Turn on the ignition key/ Activate PIR sensor / Activate door/window sensor will trigger the programmed sequence.
PASSIVE CAR JACK: Operates as below: 1. Turn the ignition switch “ON”, Car - Jacking will arm. 2. Onc e the system is armed, if you are forced from the vehicle, the system will trigger when the door is opened and closed while the ignition is “ON”.
DRIVER PAGING 1:This function works only in armed status. Press and hold the for 2 seconds when armi ng the alarm. The system will chirp and a melody sound and "call" indication flashes on the LCD screen to confirm the function is on.
REMOTE START OPERATION WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’ s reach. 2. Do not leave anyone in the vehicle while running on remote control.
TO OPERATE THE VEHICLE WHILE RUNNING ON THE REMOTE START: 1. Insert the ignition key and turn it to “ON” (not the start) position. 2. Press the brake pedal. Note: If the brake pedal is pressed before the key is in the ON position, the eng ine will shut down.
TEMPERATURE CHECK If you installed the optional temperature sensor, you can monitor, thru the LCD screen, the present indoor temperature of the passen ger compartment before cooling or heating your vehicle.
LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. and Continental U.S. Only) 1. AutoPage, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery.
This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD, which must have complete information to re ceive warranty service.
1815 West 205 th Street Suite 101 Torrance, California 90501 - 1525 Main Office: 310 - 618 - 2002 Customer Service: 800 - 262 - 2527 Ext. 462 www.autopageusa.
An important point after buying a device Auto Page RS-750lcd (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Auto Page RS-750lcd yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Auto Page RS-750lcd - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Auto Page RS-750lcd you will learn all the available features of the product, as well as information on its operation. The information that you get Auto Page RS-750lcd will certainly help you make a decision on the purchase.
If you already are a holder of Auto Page RS-750lcd, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Auto Page RS-750lcd.
However, one of the most important roles played by the user manual is to help in solving problems with Auto Page RS-750lcd. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Auto Page RS-750lcd along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
