Instruction/ maintenance manual of the product RS-662 Auto Page
Go to page of 13
1 RS - 662 PROFESSIONAL REMOTE CAR STARTER & SECURITY / ALARM SYSTEM OPERATIONS MANUAL Please register your product at www.autopageusa.com THIS PRODUCT I S DESIGNED FOR PROFESSIONAL INSTALLATION O.
2 SYSTEM OPERATIONS: WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control.
3 CHANGING THE BATTERY IN YOUR TRANSMITTERS XT - 33: This transmitter uses two (2) 3 - volt lithium ion batteries (#CR2016) t hat are sandwiched together with the (+) side facing upward. To replace the battery, you will need to use a small flat blade screwdriver.
4 DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps when arming, then you have left a door, trunk or hood lid ajar. SHOCK SENSOR / OPTIO NAL SENSOR BY - PASS: Press the button once: The siren chirps once, the system is armed. Press the button a second time within 5 seconds: The siren chirps twice, the Shock Sensor is now bypassed.
5 PATHWAY ILLUMINATION This feature turns the parking light “ON” for 30 seconds upon the unlock signal and for 10 seconds upon the lock signal. (Programm able) TWO STEPS DOOR UNLOCK: This feature will independently unlock the driver door only when deactivating the system.
6 DEACTIVATING WITHOUT A TRANSMITTER The Override function may be used if the remote transmitter is lost or inoperative. 1. Enter the vehicle and turn the ignition switch to ‘ON’ position. 2. Within 10 seconds push and release the valet switch when the in - dash LED stays on solid.
7 turn on alerting of an intrusion for 3 0 seconds. Then it will stop and automa tic reset and re - arm. If one of the sensors or detectors is still active, the alarm system will sound a maximum of 6 times of 3 0 seconds cycles.
8 A. TO REMOTE START THE VEHICLE: When you want to start your vehicle, 1. Press button once on the transmitter. 2. The parking lights will flash to indicate the remote start received the signal.
9 times to confirm Temporary Stop feature ‘ON’ 2. Turn the ignitio n key to OFF position. (The engine will stay running.) 3. The engine will run until the pre - programmed time elapsed or shutdown input is received. TIMER START: You must fully understand this feature to operate the remote start safely.
10 6. Transmitter button is pressed. 7. The vehicle refused to start running after {3} unsuccessful attempts. DISABLING THE REMOTE START SYSTEM: (If Optional toggle switch is installed) This feature all ows your system’s remote start unit to be temporarily disabled to prevent the vehicle from being remote started accidentally.
11 5. Any unexpired WARRANTY shall be applicable to equipment and parts in the possession of the original purchaser only. 6. THIS WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
12.
13 960 Knox Street Unit B, Torrance, CA 90 502 Tel: (310) 323 - 1800 or (800) 262 - 2527 www.autopageusa.com.
An important point after buying a device Auto Page RS-662 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Auto Page RS-662 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Auto Page RS-662 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Auto Page RS-662 you will learn all the available features of the product, as well as information on its operation. The information that you get Auto Page RS-662 will certainly help you make a decision on the purchase.
If you already are a holder of Auto Page RS-662, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Auto Page RS-662.
However, one of the most important roles played by the user manual is to help in solving problems with Auto Page RS-662. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Auto Page RS-662 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
