Instruction/ maintenance manual of the product RS-622 Auto Page
Go to page of 17
1 RS - 622 PROFESSIONAL 2 - WAY AM/AM REMOTE CAR STARTER & KEYLESS ENTRY SYSTEM OPERATIONS MANUAL Please register your product at www.autopageusa.com THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INST.
2 SYSTEM OPERATIONS: WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while the vehicle is running on remote control.
3 CHANGING THE B ATTERY IN YOUR TRANSMITTERS XT - 33: This transmitter uses two (2) 3 - volt lithium ion batteries (#CR2016) that are sandwiched together with the (+) side facing upward. To replace the battery, you will need to use a small flat blade screwdriver.
4 unlock and dome lights will turn on for 30 seconds. PATHWAY ILLUMINATION This feature turns the parking light “ON” for 30 seconds upon a unlock signal and for 10 seconds upon the lock signal. (Programmable) TWO STEPS DOOR UNLOCK: This feature will i ndependently unlock the driver door only when deactivating the system.
5 Enter Valet Mode: 1. From the Unlo ck condition, turn the ignition to “ON” position. 2. Push and hold valet switch for 2 seconds until the LED turns on. The LED will remain on as long as the system is in ‘valet mode’. Exit Valet Mode: 1. Return to normal operation, turn ignition ‘on’.
6 REMOTE START OPERATION: WARNINGS: As with any product that performs automat ic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control.
7 2. Move the optional remote start enable toggle switch to OFF position. (If installed) 3. Press the brake pedal, the vehicle will shut down and turn off the parking light to indicate engine stoppe d. TO OVERRIDE VEHICLE FROM REMOTE START CONTROL: To operate the vehicle while it is running from the remote start: 1.
8 Exit the timer start: Timer start can be exited manually as follows: 1. Repeat the Ente r Steps from above. Or 1. Make sure the remote start system is not operating the engine. 2. Turn the ignition on. The LED and parking light will flash (4) times.
9 BATTERY REPLACEMENT: A 1. 5V type AAA Alkaline battery powers the Remote Transmitter. When the power of the battery weakens a icon shall be displayed on the LCD screen. When the old battery is replaced with a new one, there will be beep sounds indicate the power is up.
10 Remote Transmission You are transmitting the signal to control unit In – Range Indicator You are within the remote control range. Trunk Release Trunk open.
11 For R egular R emote Control T ransmitter : 1. Prior to pushing any button on the transmitter. Press the Select II button first on the standard transmitter.
12 1. Press and hold all four remote control buttons simultaneously un til one long beep is heard. Programming has now been entered. 2 . Within 5 seconds, p ress the button to select the mode of vibration or melody, the icon will displayed on the LCD screen to show the LCD remote transceiver is in vibration mode.
13 LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS th at this new unit has been thoroughly inspected and tested at the factory prior to delivery.
14 replacement and labor of which shall be borne by the pu rchaser even if occurring during the WARRANTY period. 4. Any equipment or parts which are claimed to be defective under this WARRANTY must be.
15 Please go to the customer service tab and select product registration. It is the purchaser’s responsibility to register this product for any future warranty service.
16 For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/.
17 960 Knox Street Unit B, Torrance, CA 90502 Tel: (310) 323 - 1800 or (800) 262 - 2527 www.autopageusa.com.
An important point after buying a device Auto Page RS-622 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Auto Page RS-622 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Auto Page RS-622 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Auto Page RS-622 you will learn all the available features of the product, as well as information on its operation. The information that you get Auto Page RS-622 will certainly help you make a decision on the purchase.
If you already are a holder of Auto Page RS-622, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Auto Page RS-622.
However, one of the most important roles played by the user manual is to help in solving problems with Auto Page RS-622. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Auto Page RS-622 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
