Instruction/ maintenance manual of the product RS-610 Auto Page
Go to page of 11
RS-610 Plus PROFESSIONAL REMOTE CAR STARTER & KEYLESS ENTRY OPERATIONS MANUAL THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY.
SYSTEM OPERATIONS A. 5-BUTTON TRANSMITTER OPERATION B. ACTIVE LOCK: 1. Press button on the transmitter. . 2. The horn will chirp once and parking lights will flash once indicating that the system is now active. The vehicle doors will lock upon activating when interfaced with the keyless entry system.
D. LED DISPLAY: E. CHIRP INDICATOR: F. PARKING LIGHTS: TWO STEPS DOOR UNLOCK: This feature will independently unlock the driver door only when deactivating the system. Pushing the button a second time within 3 seconds will unlock the entire vehicle. G.
Exit Valet Mode: 1. Return to normal operation, turn ignition ‘on’. 2. Push and hold valet switch for 2 seconds, The LED will turn off indicating the system has exited the valet mode.
REMOTE START OPERATIONS WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control.
C. TO OVERRIDE VEHICLE FROM REMOTE START CONTROL: To operate the vehicle while running on the remote start. 1. Insert the ignition key and turn it to “ON” ( not the start) position. 2. Press the brake pedal. Note: If the brake pedal is pressed before the key is in the ON posi- tion, the engine will shut down.
F. SHUT-DOWN INPUT FOR REMOTE STARTER: If any of the following conditions exist while the system is operating, the engine will not start or will shut down immediately: 1. The hood is opened. 2. The brake pedal is pressed. 3. Move the optional remote start enable toggle switch to OFF position.
NOTES.
LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. and Continental U.S. Only) 1. AutoPage, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery.
This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD which must have complete information to receive warranty service.
1815 W. 205th Street Suite #101 Torrance, CA 90501 Tel: (310) 618-2002 or (800) 262-2527 www.autopageusa.com.
An important point after buying a device Auto Page RS-610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Auto Page RS-610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Auto Page RS-610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Auto Page RS-610 you will learn all the available features of the product, as well as information on its operation. The information that you get Auto Page RS-610 will certainly help you make a decision on the purchase.
If you already are a holder of Auto Page RS-610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Auto Page RS-610.
However, one of the most important roles played by the user manual is to help in solving problems with Auto Page RS-610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Auto Page RS-610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
