Instruction/ maintenance manual of the product LTP227W Samsung
Go to page of 73
BN68-00574A-0 1 U.S.A Service Division Samsung Electronics America 400 V alley Road, Suite 201, Mount Arlington, NJ 07856 www .samsungusa.com Canada Samsung Customer Care Samsung Electronics Canada Inc. 7037 Financial Drive, Mississauga, Ontario, L5N 6R3 www .
C ONTENTS Chapter 1: Y our New TV List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 List of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Familiarizing Y ourself with Y our New TV .
Contents 2 C ONTENTS Fine T uning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 V iewing Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Activating Picture-in-Picture . .
English- 1 List of Features Y our TV was designed with the latest technology . This TV is a high-performance unit that includes the following special features: • Easy-to-use remote control • Easy-.
English- 2 Familiarizing Y ourself with Y our New TV T op Panel Buttons The buttons on the top panel control your TV’ s basic features, including the on-screen menu.
English- 3 Y OUR N EW TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously , such as a VCR or a DVD player . For more information on connecting equipment, see pages 7-14. POWER INPUT PC VIDEO INPUT Connect to the video output port on your PC.
English- 4 Y OUR N EW TV Remote Control Frequently Used Buttons 1 2 3 4 5 6 7 9 8 MODE Selects a target device to controlled by the samsung remote control (TV , STB, VCR, CABLE, DVD) CH and CH (Channel UP/Down) Press CH or CH to change channels. VOL + and VOL - Press to increase or decrease the volume.
English- 5 Y OUR N EW TV 2 1 6 8 7 3 4 5 9 10 PRE-CH T unes to the previous channel. (See Page 15) Info Display Use to see information on the current broadcast. (See Page 16) EXIT Press to exit the menu. PIP See the PIP screen section of this manual. (See Page 30) SIZE Press to make the PIP window double, large or small.
English- 6 3 Replace the cover . Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV . (Assuming typical TV usage, the batteries last for about one year .
English- 7 Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat T win Leads” below . If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads” on page 8.
English- 8 Connecting Cable TV T o connect to a cable TV system, follow the instructions below . Cable without a Cable Box 1 Plug the incoming cable into the TV ANTENNA terminal on back of the TV . Because this TV is cable-ready , you do not need a cable box to view unscrambled cable channels.
English- 9 I NST ALLA TION Connecting to a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT”, or simply , “OUT”. 2 Connect the other end of this cable to the TV ANTENNA terminal on the back of the TV .
English- 10 4 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the A/B switch. 5 Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.
English- 11 I NST ALLA TION 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV . 4 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV . 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV .
English- 12 I NST ALLA TION 3 Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO INPUT jack on the TV . An S-video cable is usually included with an S-VHS VCR. (If not, check your local electronics store). * Each external input source device has a different back panel configuration.
English- 13 I NST ALLA TION Note: For an explanation of Component video, see your DVD player owner's manual. * Each external input source device has a different back panel configuration. Note: If you are using a DVI-D cable to connect 1. Be sure to connect the audio cable (sold separately) as shown above to get normal TV sound.
English- 14 I NST ALLA TION Connecting a PC Note : This figure shows the Standard Connector -jack panel. The actual configuration on your TV may be different, depending on the model. • PC AUDIO INPUT Connect these to the audio-output jacks on your PC.
English- 15 Changing Channels Using the Channel Buttons 1 Press the CH / buttons to change channels. When you press the CH / buttons, the TV changes channels in sequence. Y ou will see all the channels that the TV has memorized. (The TV must have memorized at least three channels) .
English- 16 S PECIAL F EA TURES Viewing the Display The display identifies the current channel and the status of certain audio-video settings. Viewing the Menus The on-screen displays disappear after about ten seconds. Press the button once more or wait approximately 10 seconds and it disappears automatically .
English- 17 Chapter Four O PERA TION Plug & Play Feature When the TV is initially powered On, two basic customer settings proceed automatically and subsequently: Setting Auto program, Clock. 1 Press the POWER button on the remote control. The message “Plug & Play” is displayed.
English- 18 O PERA TION Memorizing the Channels Y our TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels.
English- 19 O PERA TION 3 Press the ENTER button. The TV will begin memorizing all of the available channels. The TV automatically cycles through all of the available channels and stores them in memory . This takes about one to two minutes. Press ENTER at any time to interrupt the memorization process and return to the CHANNEL menu.
English- 20 O PERA TION 2 (Alternate method) Press the ADD/DEL button. Repeatedly pressing ENTER will alternate between “Add”and“Delete”. Press the LEFT/RIGHT buttons to select Exit , then press ENTER to exit. Y ou can view any channel (including an erased channel) by using the number buttons on the remote control.
English- 21 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select “Channel”, then press the ENTER button. UP/DOWN buttons to select “Favorrite Channel”, then press the ENTER button. 2 Press the UP/DOWN buttons Y ou can select your favorite channels to watch among the labeled channels.
English- 22 O PERA TION T o Edit the Input Source Name Name the input device connected to the input jacks to make your input source selection easier . 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select “Input” then press the ENTER button.
English- 23 O PERA TION Using Automatic Picture Settings Y our TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and “Custom”) that are preset at the factory . Y ou can activate either Dynamic, Standard, or Movie by pressing P .
English- 24 O PERA TION 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select “Picture”, then press the ENTER button. Customizing the Picture Y ou can use the on-screen menus to change the contrast, brightness, sharpness, color and tint according to personal preference.
English- 25 Using Automatic Sound Settings Y our TV has five automatic sound settings (“Standard”, “Music”, “Movie” “Speech” and “Custom”) that are preset at the factory . Y ou can activate any of them by pressing the S.MODE button (or by making a selection from the on-screen menu).
English- 26 O PERA TION 2 Press the UP/DOWN buttons to select “Custom Sound”, then press the ENTER button. 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select “Sound”, then press the ENTER button. Customizing the Sound The sound settings can be adjusted to suit your personal preference.
English- 27 O PERA TION Selecting a Menu Language 2 Press the UP/DOWN buttons to select Language. Press the ENTER button. 1 Press the MENU button to display the menu.
English- 28 O PERA TION Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue screen” mode to “Off”.
English- 29 Fine T uning Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select “Channel”, then press the ENTER button twice. 2 Press the UP/DOWN buttons to select “Fine T une”, then press the ENTER button.
English- 30 O PERA TION Viewing Picture-in-Picture This product has one tuner built-in, which does not allow PIP to function in the same mode. Please see ‘PIP Settings’ below for details. Y ou can use the PIP feature to simultaneously watch two video sources.
English- 31 O PERA TION Press the PIP CH / button to change the channel that appears in the PIP window . Changing the PIP Channel Press the SIZE button to alternate between a smaller and larger PIP window . Changing the Size of the PIP Window • When the PC is in ener gy saving mode, you cannot choose the PIP option.
English- 32 Freezing the Picture 1 Press the STILL button to freeze a moving picture. • Normal sound will still be heard. Press again to cancel. O PERA TION Changing the Screen Size 1 Press the P .SIZE button to change the screen size. • W ide: Sets the picture to 16:9 wide mode.
English- 33 O PERA TION Adjusting the Color T one Y ou can change the color of the entire screen according to your preference. 2 Press the UP/DOWN buttons to select “Color T one”, then press the ENTER button. 1 Press the MENU button to display the menu.
English- 34 O PERA TION Setting the DNIe Samsung’ s New T echnology brings you more detailed images with contrast, white enhancement and 3D noise reduction. 2 Press the UP/DOWN buttons to select “DNIe”, then press the ENTER button. 3 Press the UP/DOWN buttons to select “Demo”, “On” or “Off”, then press the ENTER button.
English- 35 O PERA TION For automatic volume control Reduces the differences in volume level among broadcasters. 2 Press the UP/DOWN buttons to select “Auto V olume”, then press the ENTER button. 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select “Sound”, then press the ENTER button.
English- 36 T o select the WOW option Emphasizes midrange and bass sound and provides a simulated surround-sound experience. O PERA TION 2 Press the UP/DOWN buttons to select “WOW”, then press the ENTER button. 1 Press the MENU button to display the menu.
English- 37 Note : The text at the bottom of the menu tells you if the incoming audio is Mono, Stereo or SAP . O PERA TION Special Sound Options Choosing a Multi-Channel Sound (MTS) Soundtrack Depending on the particular program being broadcast, you can listen to stereo, mono, or a Separate Audio Program.
English- 38 O PERA TION Note : Sound Select can also be used to select the Main or Sub sound over the speakers. 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select “Sound”, then press the ENTER button. 2 Press the UP/DOWN buttons to select “Sound Select”, then press the ENTER button.
English- 39 O PERA TION 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select “Sound”, then press the ENTER button. 2 Press the UP/DOWN buttons to select “Headphone” and press the ENTER button. Note : Headphones must be purchased separately .
English- 40 O PERA TION 1 Press the MENU button to display the on-screen menu. Press the UP/DOWN buttons to select “Setup”, then press the ENTER button. 3 Press the UP/DOWN buttons repeatedly until the correct hour appears. After the hour is entered, press the LEFT/RIGHT buttons to select “Minute”.
English- 41 O PERA TION Setting the On/Off Timer 1 Press the MENU button to display the on-screen menu. Press the UP/DOWN buttons to select “Setup”, then press the ENTER button twice. Before using the timer , you must set the TV’ s clock. (See “Setting the Clock” on page 40) 2 Press the ENTER button, to select “T ime”.
English- 42 O PERA TION 4 Press the LEFT/RIGHT buttons to select Setup. Press the UP/DOWN buttons to on-timer “On”. (Repeatedly pressing the UP/DOWN buttons will alternate between On and O f f) . When finished, press the ENTER button. T o deactivate the “On time,” select “Off” during this step.
English- 43 O PERA TION Setting the Sleep Timer Set the timer for the TV to turn off at the preset time automatically . 1 Press the MENU button to display the on-screen menu. Press the UP/DOWN buttons to select “Setup”, then press the ENTER button.
English- 44 O PERA TION ▼ Misspellings and unusual characters sometimes occur during closed caption transmissions, especially those of live events. There may be a small delay before captions appear when you change channels. These are not malfunctions of the TV .
English- 45 Using the V -Chip The V -Chip feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a Pin (personal ID number) before any of the V -Chip restrictions can be set up or changed. Setting Up Y our Personal ID Number (PIN) 1 Press the MENU button to display the menu.
English- 46 How to Set up Restrictions Using the ‘TV guidelines’ First, set up a personal identification number (PIN), and enable the V -Chip. (See previous section). Parental restrictions can be set up using either of two methods: The TV guidelines or the M P AA rating.
English- 47 2 Press the UP/DOWN buttons to select “V -chip”, then press the ENTER button. The “Enter pin” screen will appear . Enter your 4-digit PIN number . 3 Press the UP/DOWN buttons to select “TV Guidelines” , then press the ENTER button .
English- 48 How to Set up Restrictions using the MP AA Ratings: G, PG, PG-13, R, NC-17, X The MP AA rating system uses the Motion Picture Association of America (MP AA) system, and its main application is for movies. (Eventually , movie videocassettes will be encoded with M P AA ratings).
English- 49 How to Reset the TV after the V -Chip Blocks a Channel (‘Emergency Escape’) If the TV is tuned to a restricted channel, the V -Chip will block it. The screen will go blank and the following message will appear: “Excessive rating”. T o resume normal viewing, tune to a different channel using the number buttons.
English- 50 Chapter Five PC D ISPLA Y Using Y our TV as a Computer (PC) Display How to Set up Y our PC Software (Windows only) The W indows display-settings for a typical computer are shown below . However , the actual screens on your PC will probably look different, depending upon your particular version of W indows and your particular video card.
English- 51 Adjusting the Screen Quality The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.
English- 52 Changing the Screen Position Press the PC button on the r emote control to select the PC mode. PC D ISPLA Y 2 Press the UP/DOWN buttons to select “PC Setup”, then press the ENTER button. Press the UP/DOWN buttons to select “PC Position”, then press the ENTER button.
English- 53 T o Initialize the Screen Position or Color Settings PC D ISPLA Y 2 Press the UP/DOWN buttons to select “PC Setup”, then press the ENTER button. Press the UP/DOWN buttons to select “Reset”, then press the ENTER button. 1 Press the MENU button to display the menu.
English- 54 PC(Digital/Analog) Signal Select PC D ISPLA Y 2 Press the UP/DOWN buttons to select “PC Setup”, then press the ENTER button. Press the UP/DOWN buttons to select “DVI Select”, then press the ENTER button. 1 Press the MENU button to display the menu.
English- 55 How to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. PC D ISPLA Y 1 Press the MENU button to display the menu.
English- 56 Using Automatic Picture Settings PC D ISPLA Y 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select “Picture”, then press the ENTER button twice. 2 Press the UP/DOWN buttons to select the “Dynamic”, “Standard”, “Movie” or “Custom” picture setting.
English- 57 PC D ISPLA Y 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select “Picture”, then press the ENTER button. Customizing the Picture Y ou can use the on-screen menus to change the contrast, brightness,and sharpness according to personal preference.
English- 58 PC D ISPLA Y Adjusting the Color T one Y ou can change the color of the entire screen according to your preference. 2 Press the UP/DOWN buttons to select “Color T one”, then press the ENTER button. 1 Press the MENU button to display the menu.
English- 59 Chapter Six T ROUBLESHOOTING If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply , call your nearest Samsung service center . Identifying Problems Problem Poor picture Poor sound quality .
English- 60 T ROUBLESHOOTING Problem “Not Supported Mode!” message. The image is too light or too dark. Horizontal bars appear to flicker , jitter or shimmer on the image. V ertical bars appear to flicker , jitter or shimmer on the image. Screen is black and power indicator light blinks steadily .
A PPENDIX Do NOT lift the TV set by the stand. The stand is not screwed to the TV set and lifting the set by the stand may cause injury . Remove the cover as shown in the picture. 1 Connect the cables as shown in the picture. 2 Replace the cover . 3 Attach the stand to the TV set as shown in the picture.
English- 62 A PPENDIX Using the Anti-Theft Kensington Lock Figure 2 Figure 1 Cable The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately . The appearance and locking method may dif fer from the illustration depending on the manufacturer .
English- 63 A PPENDIX Retractable Stand Note: The maximum tilt angle is 7 degrees in the backward direction. Please do not tilt the TV outside the specified range. Using excessive force to tilt the TV may cause permanent damage to the mechanical part of the stand.
English- 64 A PPENDIX Cleaning and Maintaining Y our TV W ith proper care, your TV unit will give you many years of service. Please follow these guidelines to get the maximum performance from your TV . Placement • Do not place the TV near extremely hot, cold, humid or dusty places.
English- 65 Specifications A PPENDIX L TP227W Model Name Panel *Frequency Display Resolution Input Signal Horizontal V ertical Display Color 30 ~ 68 kHz 56 ~ 85 Hz 16,194,277 colors Size Display Size T ype Pixel Pitch V iewing Angle Maximum Mode 1280 X 720 @ 60 Hz Sync Signal V ideo Signal 22.
English- 66 Display Modes If the signal from the system equals the standard signal mode, the screen is adjusted automatically . If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your V ideocard user guide; otherwise there may be no video.
English- 67 Setting Up Y our Remote Control After it has been set up properly , your remote control can operate in four different modes: TV , VCR, Cable, or DVD. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.
English- 68 Setting Up the Remote to Operate Y our Cable Box Note on Using Remote Control Modes: Cable Box When your remote control is in “Cable Box” mode, the volume buttons still control your TV’ s volume. 1 T urn off your cable box. 2 Press the MODE button and make sure that the Cable LED is illuminated.
English- 69 Setting Up the Remote to Operate Y our DVD Note on Using Remote Control Modes: DVD When your remote control is in “DVD” mode, the volume buttons still control your TV’ s volume. 1 T urn off your DVD. 2 Press the MODE button and make sure that the DVD LED is illuminated.
English- 70 Remote Control Codes Admiral Aiwa Audio Dynamics Akai Bell&Howell Broksonic Candle Canon Citizen Colortyme Craig Curtis-Mathes Daewoo DB Dimensia Dynatech Electrohome Emerson Fisher Fu.
An important point after buying a device Samsung LTP227W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung LTP227W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung LTP227W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung LTP227W you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung LTP227W will certainly help you make a decision on the purchase.
If you already are a holder of Samsung LTP227W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung LTP227W.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung LTP227W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung LTP227W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
