Instruction/ maintenance manual of the product RF-350 Auto Page
Go to page of 16
1 RF - 350 PROFESSIONAL VEHICLE SECURITY SYSTEM WITH KEYLESS ENTRY INSTALLATION & USERS MANUAL (For Authorized Dealers Only) Please register your product at www.
2 WIR ING DIAGRAM.
3 (RELAY REQUIRED) 8. GRAY ...2ND CHANNEL OUTPUT 2. WHITE ...DOME LIGHT / 3RD CHANNEL OUTPUT 7. ORANGE ...STARTER INTERUPT OUTPUT (RELAY REQUIRED) 5. GREEN ...NEGATIVE DOOR TRIGGER (-) INPUT 6. YELLOW ...IGNITION INPUT 3. VIOLET ...POSITIVE DOOR TRIGGER (+) INPUT 1.
4 VACUUM OPERATED CENTRAL LOCKING Green Wire Blue Wire +12V X Cut Compressor Door Switch 30 86 87a 85 87 30 86 87a 85 87 3 Pin Plug To Alarm VACUUM OPERATED DOOR LOCKING SYSTEM: TYPICAL OF MERCEDES BENZ AND AUDI. Locate the wire under the driver's kick panel.
5 2 STEP DOOR UNLOCK WIRE CONNECTION FOR POSITIVE SWITCHED DOOR LOCKS Cut Existing Unlock X Lock Unlock OEM Door Master Lock Switch To All Other Door Lock Motors 8 - Pin Plug From Alarm H2/ 8 Gray Wire OEM Driver's Door Lock Motor + 12V Existing Pos.
6 Note: If more than 4 transmitters are programmed, the system will only keep the last 4 transmitters and delete the others. ALARM FEATURE “ A ” PROGRAMMING: 1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position. 2. Push the Valet switch 3 times and hold in on the 3 rd push .
7 ALARM FEATURE “ B ” PROGRAMMING: 1 Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position. 2 Push the Valet switch 5 times and hold in on the 5 th push. When a long chirp is heard, release the valet swit ch. You are now in the Alarm feature ‘B ’ programming mode.
8 ALARM FEATURE “ C ” PROGRAMMING: 1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIME S and stay in OFF position. 2. Push the Valet switch 7 times and hold on the 7 th push until Three chirps with a long chirp is heard then release the valet switch.
9 O peration Manual TRANSMITTER OPERATION: Transmitter Button System Function Remark Lock Doors & Arm System Panic function Press and Hold for 3 seconds Car Locator Under armed mode - Arm and Delete The 2 Stage Shock Sensor Press twice wit hin 3 seconds + Silent Arming / Disarming Ignition in "off" position.
10 / hood / trunk, the security system LED will stop flashing. It will b egin flashing again once all vehicle entrances are closed. 2. After 30 - second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1] time and the parking lights will flash [1] time.
11 ANTI CAR - JACKING: ( OPTIONAL) If alarm option is installed. Warning: If you don't need the carjacking function in this alarm system, be sure to set carjacking feature “OFF”.
12 TRUNK RELEASE. Press and hold button on transmitter for two seconds to remote control the trunk release or other electric device s. CAR LOCATOR Press the button on the transmitter to active car locator function. The siren will chirp 6 times. The parking light will flash 12 times, allowing you to easily locate your car.
13 CHANGING THE BATTERY IN YOUR TRANSMITTERS XT - 33: The XT - 33 transmitter uses two (2) 3 - volt lithium ion batteries (#CR2016) that are sandwiched together wit h the (+) side facing upward. To replace the battery, you will need to use a small flat blade screwdriver.
14 LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery.
15 You must register your product online at http://www.autopageu sa.com to receive any warranty service. Please go to the customer service tab and select product registration. It is the purchaser’s responsibility to register this product for any future warranty service.
16 960 Knox Stre et Unit B, Torrance, CA 90502 Tel: (310) 323 - 1800 or (800) 262 - 2527 www.autopageusa.com Technical Support: 800 - 945 - 2527 (For Authorized Dealers Only).
An important point after buying a device Auto Page RF-350 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Auto Page RF-350 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Auto Page RF-350 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Auto Page RF-350 you will learn all the available features of the product, as well as information on its operation. The information that you get Auto Page RF-350 will certainly help you make a decision on the purchase.
If you already are a holder of Auto Page RF-350, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Auto Page RF-350.
However, one of the most important roles played by the user manual is to help in solving problems with Auto Page RF-350. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Auto Page RF-350 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
