Instruction/ maintenance manual of the product Professional Vehicle Security System RF-420LCD Auto Page
Go to page of 13
RF - 420 LCD PROFESSIONAL VEHICLE SECURITY SYSTEM OPERATION MANUAL THIS PRODUCT IS DESIG NED FOR PROFESSIONAL INSTALLATION ONLY.
2 TRANSMITTER OPERATION: Transmitter Button System Function Remark Lock Doors & Arm System Panic function Press and Hold for 3 seconds Car Locator Under armed mode - Arm and Delete The 2 Stage Shock Sensor Press twice within 3 seconds + Silent Arming / Disarming Ignition in "off" position.
3 PASSIVE ARMING: Active arming / disarming is controlling your security system via the remote transmitter. This security system is equipped with an optional Passive Arming feature, which allows the security system to arm 30 se conds after the last door is closed.
4 PATHWAY ILLUMINATION: This feature turns the parking light “ON” for 30 seconds upon a unlock signal and for 10 seconds upon the lock signal if programmed. TWO STEP DOOR UNLOCK : This feature will independently unlock the driver’s door only when dis arming the security system.
5 TRIGGER THE SYSTEM When armed, your vehicle is protected as follows: 1. Light impacts will trigg er the warn - away signal. A long chirp from siren/horn. 2. Heavy impacts / Doors open / Hood open / Trunk open / Turning on the ignition switch - All will trigger the programmed sequence.
6 IGNITION CONTROL DOOR LOCKS. If the vehicle’s door locks have been interfaced to the security system, the system will au tomatically lock the vehicle's doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”.
7 BATTERY REPLACEMENT: A 1.5V type AAA Alkaline battery powers the Remote Transmitter. When the power of the battery weakens a icon shall be displayed on the LCD screen. When the old battery is replaced to new one, there will be beep sounds indicate the power is up.
8 PROGRAM MODE FO R LCD REMOTE CONTROL TRANSCEIVER: Trans ceiv er Button System Function Remark Program Mode - Switching code for 2nd / 1st Car Operation Press within 5 seconds Program Mode - Melody / Vibration Mo de Press within 5 seconds Program Mode - Power Save Mode Press within 5 seconds LCD screen lamp turns on for 5 seconds.
9 Power Save Mode: While in the power save mode, the LCD remote transce iver will “ sleep ” until a button is pushed , to extend the life of battery. When power save mode is ON, the remote control will wake up periodically to check for messages from the security module.
10 ALARM OPERATING CONDITION : Function Siren Parking Lights LED Doors Starter Disable Dome Light 1. Arm 1 Chirp 1 Flash Slow flash Locking On 2. Disarm 2or4 Chirps 2 or 3 Flashes Off or Fast flash Unlocki ng Off On for 30 sec 3. Trigger Alarming Flashing Slow flash On flashes 4.
11 LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery.
12 authorized by a dealer of Auto Page will void the product’s limited lifetime warranty. This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD w hich must have complete information to receive warranty service.
13 960 Knox Street Unit B Torrance, California 90502 Main Office: 310 - 323 - 1800 Customer Service: 800 - 262 - 2527 Ext. 462 www.autopageusa.com.
An important point after buying a device Auto Page Professional Vehicle Security System RF-420LCD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Auto Page Professional Vehicle Security System RF-420LCD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Auto Page Professional Vehicle Security System RF-420LCD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Auto Page Professional Vehicle Security System RF-420LCD you will learn all the available features of the product, as well as information on its operation. The information that you get Auto Page Professional Vehicle Security System RF-420LCD will certainly help you make a decision on the purchase.
If you already are a holder of Auto Page Professional Vehicle Security System RF-420LCD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Auto Page Professional Vehicle Security System RF-420LCD.
However, one of the most important roles played by the user manual is to help in solving problems with Auto Page Professional Vehicle Security System RF-420LCD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Auto Page Professional Vehicle Security System RF-420LCD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
