Instruction/ maintenance manual of the product EXP-52 Auto Page
Go to page of 12
EXP - 52 OPERATION INSTRUCTIONS THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY!!.
Congratulations on your purchase of the EXP - 52 vehicle security system. Please take the time to read over this operation manual to t horoughly familiarize yourself with the many features and options. THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY!! !!NOTICE!! THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
EXP - 52 1 EXP - 52 OPERATION INSTRUCTIONS A. REMOTE CONTROL TRANSMITTER OPERATION The new remote control transmitter (XT - 54) included with the EXP - 52 offers the code rolling feature which will prevent illegal use of a code - grabber with an attempt to record the code of your transmitter.
EXP - 52 2 3. PANIC FUNCTION The EXP - 52 remote control may be used as a remote panic switch to trigger the siren in cases of emergency. To activate the PANIC FUNCTIO N press and hold the ON/OFF button on the remote transmitter for a minimum of 3 seconds.
EXP - 52 3 6. OPTIONAL ACCESSORY OPERATION Simultaneously pressing both the ON/OFF and AUX buttons will allow thi rd channel operation. A negative pulse begins and will continue until buttons are released. It is not recommended to press the buttons longer than 3 seconds.
EXP - 52 4 B. LED STATUS INDICATOR OPERATION 1. LED OFF= The EXP - 52 is disarmed. 2. LED CONSTANT ON= Indicates open trigger circuit. 3. LED FAST FLASHING= Passive arming timer is counting down. 4. LED FLASHING= The EXP - 52 is armed. 5. LED FLASHING IN A 2 FLASH/HOLD SEQUENCE= Alarm breach.
EXP - 52 5 (siren will sound); switch the vehicle ignition to ON. Move the VALET/OVERRIDE switc h to ON; then OFF; the siren will stop. The EXP - 52 will be disarmed. Quickly replace or service the remote transmitter to insure continued vehicle protection.
EXP - 52 6 2. The LED STATUS INDICATOR will begin fast flashing and the passive arming timer will begin counting down. 3. If you re - open the exit, the LED will stop flashing. 4. Close the exit, and the LED will start flashing again. 5. The EXP - 52 will count down for 30 seconds.
EXP - 52 7 This feature is optional at time of installation. I. TRIGGER TEST After arming the EXP - 52 in either the PASSIVE or MANUAL mode, test the system in the following manner. 1. Open any door or other protected opening. The siren will sound instantly, and the lights will flash.
EXP - 52 8 1. Flip the VALET/OVERRIDE switch to "ON" position. 2. Turn the ignition switch to "ON", then "OFF", then immediately 3. Flip the VALET/OVERRIDE switch "OFF", "ON/OFF", "ON/OFF". The siren will chirp one (1) time.
EXP - 52 9 To code the EXP - 52 transmitte rs for two or three vehicles follow the diagrams as shown below. Before multiple vehicle programming can be achieved, it is necessary to enter the programming mode as described in SECTION K.
A.P.I..
An important point after buying a device Auto Page EXP-52 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Auto Page EXP-52 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Auto Page EXP-52 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Auto Page EXP-52 you will learn all the available features of the product, as well as information on its operation. The information that you get Auto Page EXP-52 will certainly help you make a decision on the purchase.
If you already are a holder of Auto Page EXP-52, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Auto Page EXP-52.
However, one of the most important roles played by the user manual is to help in solving problems with Auto Page EXP-52. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Auto Page EXP-52 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
