Instruction/ maintenance manual of the product LE40R81W Samsung
Go to page of 143
BN68-01 166F-01 Co nt ac t SA MS UN G W OR LD -W ID E If yo u h ave an y q ues ti on s or co mm ent s r el ati ng to Sam su ng pro du ct s, pl ea se con ta ct th e S AM SU NG c us to me r c ar e c ent re .
© 2007 Samsung Electronics Co., Ltd. All rights reserved. Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
Contents CONNECTING AND PREP ARING YOUR TV List of Parts ....................................................... 2 Installing the Stand ........................................... 2 Installing the W all Mount Kit .............................. 2 Viewing the Control Panel .
English - 2 List of Parts Please make sure the following items are included with your LCD TV . If any items are missing, contact your dealer. M4 X L16 Remote Control & Batteries (AAA x 2) Power Co.
English - 3 Viewing the Control Panel 1 SOURCE T oggles between all the available input sources (TV , Ext.1, Ext.2, A V , S-Video, Component, PC, HDMI1, HDMI2, HDMI3). In the on-screen menu, use this button as you use the ENTER/OK button on the remote control.
English - 4 Viewing the Connection Panel Whenever you connect an external device to your TV , make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.
English - 5 4 Connecting an Aerial or Cable T elevision Network T o view television channels correctly , a signal must be received by the set from one of the following sources: - An outdoor aerial / A.
English - 6 1 Selects a target device to be controlled by the Samsung remote control (TV , DVD, STB, CABLE, VCR) (Refer to page 34~36 ) 2 T elevision Standby button 3 Number buttons for direct channel access 4 One/T wo-digit channel selection 5 It display "Channel List" on the screen.
English - 7 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. 3.
English - 8 When the TV is initially powered on, several basic settings proceed automatically and subsequently . The following settings are available. 1. Press the POWER button on the remote control. The message "Start Plug & Play" is displayed with "OK" selected.
English - 9 If you want to reset this feature... 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button. 2. Press the ENTER/OK button again, to select "Plug & Play".
English - 10 Programme: Selects a program number for the channel. Colour System: Sets the colour supporting system. Sound System: Sets the sound supporting system. Channel: Selects a channel. Search: Scans for the frequency value for the channel.
English - 11 Set the channels according to your preference. Y ou can easily delete, add, or lock the channel you want. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
English - 12 Y ou can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. Give easily remembered numbers to the channels that you watch most often. 1. Press the MENU button to display the menu.
English - 13 Use fine tuning to manually adjust a particular channel for optimal reception. 1. Use the number buttons to directly select the channel that you want to fine tune. 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
English - 14 Y ou can select the type of picture which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER/OK button, to select "Picture". 2. Press the ENTER/OK button again, to select "Mode".
English - 15 Changing the Colour T one Y ou can select the most comfortable colour tone to your eyes. 1. T o select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 14) 2. Press the 5 or 6 button to select "Colour T one", then press the ENTER/OK button.
English - 16 Y ou can set detailed picture settings. 1. Press the MENU button to display the menu. 2. Press the ENTER/OK button, to select "Picture". 3. Press the ▲ or ▼ button to select "Detailed Settings", then press the ENTER/OK button.
English - 17 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio. 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Wide Zoom: Magnify the size of the picture more than 4:3.
English - 18 When setting the picture size to Auto Wide in a 16:9 wide TV , you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.
English - 19 If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1. Press the MENU button to display the menu. Press the ENTER/OK button, to select “Picture”.
English - 20 Y ou can display a sub picture within the main picture of set programme or video input. In this way , you can watch the picture of set programme or video input from any connected equipment while watching the main picture. 1. Press the MENU button to display the menu.
English - 21 HDMI Black Level Y ou can directly select the black level on the screen to adjust the screen depth. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select "HDMI Black Level", then press the ENTER/OK button.
English - 22 The sound settings can be adjusted to suit your personal preferences. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select "Equalizer", then press the ENTER/OK button.
English - 23 Y ou can set the sound mode by pressing the “DUAL” button. When you press it, the current sound mode is displayed on the screen. Y ou can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.
English - 24 Selecting the Internal Mute If you want to hear the sound through separate speakers, cancel the internal amplifier . 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
English - 25 Resetting the Sound Settings to the Factory Defaults If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. 1. Press the MENU button to display the menu.
English - 26 Y ou can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
English - 27 When you start using your set for the first time, you must select the language which will be used for displaying menus and indications. 1. Press the MENU button to display the on-screen menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
English - 28 Setting the Blue Screen Mode / Selecting the Melody Y ou can view higher quality pictures by configuring the screen settings in PC Mode. If you set the Home Theater PC function to On, you can configure the Detail Settings (when Picture Mode is set to Standard or Movie) as in PC Mode.
English - 29 This function adjusts the brightness of the TV so as to reduce power consumption. When you watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the dazzling of your eyes as well as the power consumption.
English - 30 Name the device connected to the input jacks to make your input source selection easier . 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Input", then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER/OK button.
English - 31 T eletext Decoder Most set channels carry " teletext ", pages of written information that provide information such as: T elevision programme times. News bulletins and Weather forecasts. Sports results. Subtitles for the hard of hearing.
English - 32 Y ou can display teletext information at any time, but signal reception must be good. Otherwise: Information may be missing. Some pages may not be displayed. T o activate the teletext mode and display the contents page: 1. Using the P ( ) or P ( ) button, select the channel providing the teletext service.
English - 33 Using Fastext to Select a T eletext Page The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control. 1. Display the teletext contents page by pressing the TEXT/MIX ( ) button.
English - 34 VCR Brand Code SAMSUNG 000 001 002 003 004 005 077 078 079 ADMIRAL 020 AIWA 025 AKAI 004 027 032 AUDIO DYNAMICS 007 026 BELL&HOWELL 018 BROKSONIC 022 CANDLE 002 003 006 008 015 055 CA.
English - 35 CABLE BOX Brand Code SAMSUNG 000 001 002 003 004 005 006 007 GI 041 HAMLIN 003 024 031 HIT ACHI 025 030 JERROLD 038 039 MACOM 025 030 MAGNA VOX 019 023 028 OAK 026 P ANASONIC 003 022 027 .
English - 36 DVD Brand Code P ANASONIC 024 034 124 134 136 137 138 PHILIPS 036 076 ROTEL 117 1 18 RIO 120 RCA 023 035 074 075 131 132 RAITE 073 ROWA 038 SAMPO 104 SONY 026 029 126 127 128 129 130 141 .
English - 37 The Wi ndows dis play-s etting s for a typi cal compu ter are show n belo w. Th e actu al screen s on you r PC may be dif ferent depen ding upon your par ticula r vers ion of Wind ows and your parti cular vid eo card.
English - 38 Setting the PC Coarse and Fine T uning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again.
English - 39 Once the wall mount is installed, the position of your TV can be easily adjustable. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER/OK button. 2. Press the ▲ or ▼ buttons to select “Wall-Mount Adjustment”, then press the ENTER/OK button.
English - 40 What is Anynet + ? Anynet+ is an A V network system that enables an easy-to-use A V interface for users by controlling all connected A V devices through the Anynet+ menu when Samsung Electronics A V devices are connected. Connecting Anynet + Devices The Anynet+ system supports A V devices supporting Anynet+ only .
English - 41 Setting Up Anynet + The following settings are to use Anynet+ functions. Using the Anynet+ Function 1. Press the Anynet+ button. Press the ▲ or ▼ button to select Setup , then press the ENTER/OK button. 2. Press the ENTER/OK button to select Anynet+ (HDMI-CEC) , then press the ENTER/OK button.
English - 42 Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV . Anynet+ Menu Description View TV Switches from Anynet+ to TV broadcast mode. Select Device Y our TV connects to the corresponding device.
English - 43 Listening through a Receiver Y ou can listen to sound through a receiver instead of the TV speaker. 1. Press the Anynet+ button. Press the ▲ or ▼ button to select Receiver , then press the ENTER/OK button. 2. Press the ◄ or ► button to select to On , then press the ENTER/OK button.
English - 44 T roubleshooting: Before Contacting Service Personnel No sound or picture Normal picture but no sound No picture or black and white picture Sound and picture interference Blurred or snowy picture, distorted sound Remote control malfunctions "Check signal cable.
English - 45 T echnical and Environmental Specications Model Name Screen Size (Diagonal) Power Consumption PC Resolution Sound Output Dimension (WxDxH) Body With stand Weight With stand Environment.
© 2007 Samsung Electronics Co., Ltd. All rights reserved. .
Список принадлежностей .....................................
Уб едитесь, что сле дующие принадлежности прилагают ся к телевизор у с ЖК-дисплеем.
Цве т и форма устройства могут различа ться в зависимости от моде ли. 1 4 Использу ется для смены каналов.
При подключении внешнег о устройства к те левизору убедит есь, что питание данного устройств а вык лючено.
4 .
1 Выб.
С.
.
Нажмите кнопку для от ображения меню.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SAMSUNG 000 001 002 00.
SAMSUNG 000 001 002 003 004 005 006 007 GI 041.
P ANASONIC 024 034 124 134 136 137 138 PHILIPS 036 076 ROTEL 1 17 1 18 RIO 120 RCA 023 035 074 075 131 132 RAITE 073 ROWA 038 S.
.
.
Нажмите кнопку для от ображения меню.
.
.
.
.
.
.
.
BN68-01166F-Rus-0317.
© 2007 Samsung Electronics Co., Ltd. All rights reserved. .
Пере лік де талей ............................................................. 2 Встанов лення підставки .
Перевірт е наявність усіх пере лічених елементів, які поста чаються з те левізором з РК екраном.
Форма і колір вироб у можуть відрізнятися, залежно від мо де лі. 1 4 Використовую ться для зміни к аналів.
Перед тим, як під’єдна ти зовнішній пристрій до телевіз ора, перевірте, чи вимкнено живлення.
4 .
1 Дозволяє вибра ти пристрій для керування з пуль та ДК Samsung (TV , DVD, STB, CABLE, VCR) (Див.
Відкрийте кришку на зворо тній стороні пуль та ДК, як показано на малюнку .
.
Натисніть кнопку , щоб відкрити меню.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SAMSUNG 000 001 002 003 004 005 077 078 079 ADMIRAL 020 AIWA 025 AKAI 004 027 03.
SAMSUNG 000.
P ANASONIC 024 034 124 134 136 137 138 PHILIPS 036 076 ROTEL 1 17 1 18 RIO 120 RCA 023 0.
.
.
.
.
.
.
.
.
.
.
BN68-01166D-Ukr-0317.
An important point after buying a device Samsung LE40R81W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung LE40R81W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung LE40R81W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung LE40R81W you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung LE40R81W will certainly help you make a decision on the purchase.
If you already are a holder of Samsung LE40R81W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung LE40R81W.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung LE40R81W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung LE40R81W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
