Instruction/ maintenance manual of the product HP-R5072C Samsung
Go to page of 144
Owner ’ s Instructions HP-R4272C HP-R5072C This device is a Class B digital apparatus. Register your product at www .samsung.com/global/register BN68-00825J-00Eng_(001,144) 5/23/05 9:57 AM Page 3.
Impor tant W arranty Information Regarding T elevision Format V iewing 2 W ide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.
User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention.
T able of Contents 4 General Information Y our New Plasma Display Panel......................8 Remote Control Buttons ................................11 W all Installation Instructions ..........................13 How to assemble the Stand-Base ......
Connecting a PC and Operation Connecting a PC ........................................86 Changing the Position of the Image ..............90 Picture Quality Adjustment ............................91 Image Reset ........................................
BN68-00825J-00Eng_(002~031) 5/18/05 2:07 PM Page 6.
PLASMA DISPLA Y P ANEL General Information Y our New Plasma Display Panel ......................................................8 Remote Control Buttons ................................................................11 W all Installation Instructions .
8 Y our New Plasma Display Panel Front Panel Œ SOURCE button Press to display all of the available video sources (TV , A V1, A V2, S-Video1, S-Video2, Component1, Component2, PC, and HDMI). ´ MENU button Displays the main on-screen menu. ˇ VOL +, - buttons Press to increase or decrease the volume.
9 Checking Accessories Power Cord (3903-000144) COMPONENT Side A V Anynet Cable (BN39-00518A) Antenna Cable Component Cables (RCA) HDMI/DVI cable Owner’ s Instructions Remote Control (BN59-00462A) / AAA Batteries S-VIDEO Cable HDMI Cable The following parts are sold separately and are available at most electronics stores.
10 Rear Panel Œ POWER IN Connect the supplied power cord. ´ SER VICE ONL Y Connector for ser vice only . ˇ HDMI/DVI IN Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analog audio inputs.
11 Remote Contr ol Buttons Œ POWER button Tu r ns the TV on and off. ´ GUIDE button Press to display the on-screen Electronic Program Guide (EPG). ˇ ANTENNA button Press to select “Air” or “Cable”. ¨ Number buttons ˆ - button Press to select additional channels (digital and analog) being broadcast by the same station.
¿ P .MODE button Adjust the TV picture by selecting one of the preset factor y settings (or select your personal, customized picture settings). ¸ S.MODE button Select Sound effect. ˛ E.SA VING button Press to adjust screen brightness according to surrounding environment.
13 Wa ll Installation Instructions Refer to the correct installation guide according to your wall bracket. 1 Contact a technician for installing the wall bracket. 2 Samsung Electronics is not responsible for any damage to the product or injur y to yourself or others if you elect to perfor m the wall installation.
14 1 Insert and tighten the Captive Screw in the direction of the arrow . When done, mount the wall bracket on the wall. 2 Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct.
15 1 Remove the 4 screws on the back of the product. 2 Insert the screw into the plastic hanger . (See the figure below) Fixing the TV panel to the wall attachment panel bracket The shape of the product may var y depending on the model.
16 How to Adjust Mounting Angle Note Note : Adjust the bracket angle to - 2° before installing it on the wall. Make sure to use the top center , and not the left or the right side of the product to adjust the angle. 1. Fix the product to the wall bracket.
17 How to assemble the Stand-Base ➤ ➤ T wo or more people should carr y the TV . Never lay the TV on the floor because of possible damage to the screen. Always store the TV upright. 1 Using the 4 screws for securing the stand pegs and the monitor , firmly attach the monitor to the stand pegs.
BN68-00825J-00Eng_(002~031) 5/18/05 2:08 PM Page 18.
PLASMA DISPLA Y P ANEL Connections Connecting VHF and UHF Antennas ..............................................20 Connecting Cable TV....................................................................21 Connecting a VCR.............................
Connecting VHF and UHF Antennas 20 Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. 1 Plug the antenna lead into the ANT 2 IN (AIR IN) on the TV .
21 Connecting Cable TV Y ou can connect different cable systems to your TV , including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Cable Box 1 Plug the incoming cable into the ANT 1 IN (CABLE IN) on the TV .
22 Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter , an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). 1 Find and disconnect the cable that is connected to the ANTENNA IN terminal of your Splitter .
23 Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack Connect the Video/Audio cables between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output jacks on the VCR. (Note: For better video, use an S-Video cable.
24 Connecting a Camcorder TV Rear Panel S-Video cable Audio cable V ideo cable Camcorder Connect a Video/Audio cable between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and the VIDEO or S-VIDEO/AUDIO output jacks on the camcorder . (Note: For better video, use an S-VIDEO cable.
25 Connecting a DVD Player (480i, 480p) Playing DVD Connect the Y , P B , P R (COMPONENT1, 2) input jacks on the TV to the Y , P B , P R output jacks on the DVD player using a component cable. Connect the AUDIO L/R (COMPONENT1, 2) input jacks on the TV to the AUDIO output jacks on the DVD player using a audio cable.
26 Connecting a DTV Receiver (480p, 720p, 1080i) This TV displays the optimum picture in 720p mode. W atching DTV Connect the cable or antenna to the antenna input jack on the DTV . Connect the Y , P B , P R (COMPONENT1, 2) or HDMI input jack on the TV to the Y , P B , P R or DVI output jacks on the DTV receiver using a component or HDMI/DVI cable.
27 Connecting to HDMI (High Definition Multimedia Inter face) (480p, 720p, 1080i) W atching DTV Connect the cable or antenna to the antenna input jack on the DTV . Connect the HDMI input jack on the TV with the HDMI output jack on the DTV Set-T op Box using an HDMI cable.
28 Connecting a Digital TV Set-T op Box (480p, 720p, 1080i) By inputting a high-bandwidth digital content protection High-Definition picture source to the HDMI input jack on the TV , High-Definition pictures can be displayed on the screen in their digital form.
29 Connecting a Digital Audio System There are many types of digital audio systems on the market today . A simplified illustration of an audio system is shown below . For more information, see your audio system owner’ s manual. If your audio system has a coaxial digital audio input, connect to the “COAXIAL” output jack on the TV .
30 Connecting to an Analog Amplifier TV Rear Panel The “AUDIO OUT (AUDIO L/R)” terminals cannot be used for external speakers. Y ou must hook them up to an amplifier .
PLASMA DISPLA Y P ANEL Operation Tu r ning the TV On and Off ............................................................32 V iewing the Menus and Displays ..................................................36 Memorizing the Channels ..................
Tu rning the TV On and Off 32 Tu rning the TV On and Off Press the POWER button on the remote control. The TV will be turned on and you will be able to use its features.
3 Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTER button to select “Start”. Notes • If the antenna is connected to ANT 1 IN (CABLE IN), select “Cable” and if it is connected to ANT 2 IN (AIR IN), select “Air”.
34 6 Press the ENTER button. Press the ▲ or ▼ button to select “Y es” or “No”, then the ENTER button. “Select the time zone in which you live” menu is automatically displayed.
35 If you want to reset this feature... 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ENTER button to select “Plug & Play”. 3 For further details on setting up options, refer to the previous page.
36 V iewing the Menus and Displays Y our TV has a simple, easy-to-use menu system that appears on the TV screen. This system makes it convenient and fast to use features on the TV . Y our TV also lets you display the status of many of your TV’ s features.
37 Memorizing the Channels Y our TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits.
38 Storing Channels in Memor y 4 Select the correct signal source (STD, HRC, and IRC) by pressing the ▲ or ▼ button, then press the ENTER button . Note • STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.
39 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Add/Delete”, then press the ENTER button. 3 Repeatedly pressing the ENTER button will alternate between add channel and delete channel.
40 Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press the CH or CH button, the TV changes channels in sequence. Y ou will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.
41 Using the “ - ” Button The “ - ” button is used to select stations that broadcast both a digital and analog signal. For example, for Channel 7 - 1 (digital), press “7”, then “ - ”, then “1”. For channel 7 - 2 (analog), press “7”, then “ - ”, then “2”.
Setting Up Y our Remote Contr ol 42 Y our TV comes equipped with a universal remote control. In addition to controlling the TV , the universal remote control can also operate a VCR, Cable box, DVD, and some Samsung Set-top boxes (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung).
43 Remote Control Codes VCR Codes DVD Codes Cable Box Codes BN68-00825J-00Eng_(032~045) 5/18/05 2:09 PM Page 43.
V iewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-T op Box, and the TV source (broadcast or cable). 44 Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select “Input”.
45 Assigning Names to External input mode 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the ▲ or ▼ button to select “Edit Name”, then press the ENTER button. 3 Press the ENTER button. Press the ▲ or ▼ button to select external device, then press the ENTER button.
BN68-00825J-00Eng_(046~063) 5/18/05 2:10 PM Page 46.
PLASMA DISPLA Y P ANEL Picture Contr ol Changing the Picture Standard ......................................................48 Customizing the Picture Settings ....................................................49 V iewing the DNIe Demonstration ....
Changing the Picture Standard Y ou can select the type of picture which best corresponds to your viewing requirements. 48 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ENTER button again to select “Mode”.
1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ENTER button. Press the ▲ or ▼ button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTER button.
50 5 Press the ENTER button to return to “Mode”. Press the ▲ or ▼ button to select “Color T one”, then press the ENTER button. 6 Press the ▲ or ▼ button to select a particular option (Cool2, Cool1, Normal, W arm1, or W arm2), then press the ENTER button.
51 V iewing the DNIe Demonstration This TV includes the DNIe function so as to provide a high visual quality . If you set DNIe Demo to On, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality .
Changing the Screen Size Screen size selection depends on the type of video input. 52 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Size”, then press the ENTER button.
When you press the P .SIZE button under the cover of the remote control, the TV’ s screen mode should appear in sequence. The screen displays in this order: 16:9, Panorama, Zoom1, Zoom2, 4:3. Note • If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image may be burned onto the screen.
54 V iewing the Picture-in-Picture Selecting the PIP Screen 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ENTER button, then press the ▲ or ▼ button to select “On”.
55 Selecting an External Signal Y ou can use PIP to view a signal from an exter nal source, such as a VCR. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
Swapping the Contents of the PIP and Main Image 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Swap”, then press the ENTER button.
57 Changing the Size of the PIP Window 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Size”, then press the ENTER button.
Changing the Location of the PIP Image 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Position”, then press the ENTER button.
59 Changing the PIP Channel 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “PIP Channel”, then press the ENTER button.
60 Selecting the Sound Source Y ou can use this feature to hear sound from the main or sub (PIP) picture. 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Sound Select”, then press the ENTER button.
61 Using the My Color Control Function in the Easy Control Menu Skin, sky and grass tones are easily adjustable to suit your preferences. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “My Color Control”, then press the ENTER button.
62 My Color Control Mode Characteristics Using My Color Control mode, you can enjoy vivid colors as shown below . Note •I mages shown above may differ from the actual adjustment on the screen. These images are presented for illustrative purposes. ➤ ➤ Standard Picture.
63 My Color Control Custom Settings Users can adjust the 6 My Color Control colors (Red, Green, Blue, Y ellow , Pink, and White). 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “My Color Control”, then press the ENTER button.
64 Resetting the My Color Control Colors to the Factor y Defaults To return to the factor y default settings for My Color Control colors, use the Reset function. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
PLASMA DISPLA Y P ANEL Sound Contr ol Customizing the Sound ................................................................66 Using Automatic Sound Settings ....................................................67 Setting the T ruSurround XT ..........
Customizing the Sound The sound settings can be adjusted to suit your personal preferences. (Alternatively , you can use one of the “automatic” settings. See next page.) 66 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ▲ or ▼ button to select “Standard”, “Music”, “Movie”, “Speech”, or “Custom” sound setting, then press the ENTER button.
68 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “SRS T ruSurround XT”, then press the ENTER button. 3 Press the ▲ or ▼ button to change the setting (Off, 3D Mono, or Stereo), then press the ENTER button.
69 Choosing a Multi-Channel Sound (MTS) track - Digital The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program.
1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Multi-T rack Options”, then press the ENTER button. 3 Press the ENTER button to select “Multi-T rack Sound”.
71 Using the Auto V olume Each broadcasting station has its own signal conditions, which can make it necessar y to adjust the volume ever y time the channel is changed.
1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Digital Output”, then press the ENTER button. Press the ▲ or ▼ button to select “Dolby Digital” or “PCM”, then press the ENTER button.
73 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Melody”, then press the ENTER button. Press the ▲ or ▼ button to select “On” or “Off”, then press the ENTER button.
Selecting the Internal Mute Sound output from the TV speakers is muted. 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Internal Mute”, then press the ENTER button.
PLASMA DISPLA Y P ANEL Channel Contr ol Selecting the Antenna ..................................................................76 Selecting Y our Favorite Channels ..................................................77 Labeling the Channels ...........
Selecting the Antenna 76 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ENTER button to select “Antenna”. Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER button.
77 77 Selecting Y our Favorite Channels Y ou can store your favorite channels for each available input source (such as TV and Cable box). Then, when you press the F A V .CH button on the remote control, the TV displays only the favorite channels you previously stored, allowing you to quickly and easily find frequently watched channels.
78 Labeling the Channels Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, “PBS2”, “CNN1”, etc.) A label consists of five fields, where each field is a letter , a number or a blank. When the INFO button is pressed, the channel label will appear next to the channel number .
79 V iewing the Channel Lists Y ou can display a list of all channels or your favorite channels. 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.
80 Editing the Channel Lists Y ou can edit channels to be added or deleted. 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.
81 Fine T uning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Fine T une”, then press the ENTER button.
82 Checking the Digital-Signal Strength Unlike analog channels, which can var y in reception quality from “snowy” to clear , digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel.
83 LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
BN68-00825J-00Eng_(084~113) 5/18/05 2:14 PM Page 84.
PLASMA DISPLA Y P ANEL Connecting a PC and Operation Connecting a PC ..........................................................................86 Changing the Position of the Image ................................................90 Picture Quality Adjustment .
86 Connecting a PC Connection to a Macintosh computer may require an adapter . Audio cable PC cable TV Rear Panel Connecting a PC (15p D-SUB) to the TV Connect a PC cable between the PC Output jack on the PC and the RGB input jack (PC IN) on the TV .
87 87 Setting up Y our TV (Plug and Play) Our adoption of the new VESA Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system, without the usual setup hassles and confusion.
88 How to Set up Y our PC Software (Windows only) The Windows display-settings for a typical computer are shown below . But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card.
89 Note Both screen position and size will var y , depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: • The interlace mode is not supported. • The TV operates abnormally if a non-standard video format is selected.
90 After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned. Preset: • Press the SOURCE button to select “PC.” 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
91 Plug & Play √ Language : English √ Time √ V -Chip √ Caption √ Menu T ransparency : Medium √ † More Setup TV Move Enter Return Picture Quality Adjustment Picture Automatic Adjustment Preset: •P ress the SOURCE button to select “PC”.
Coarse Adjustment Preset: •P ress the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button.
Fine T uning (Fine) Preset: •P ress the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button.
94 Image Reset Preset: •P ress the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button.
PLASMA DISPLA Y P ANEL Time Setting Setting the Clock .......................................................................96 Setting the On/Off T imer ...........................................................98 Setting the Sleep T imer ..........
Setting the Clock Setting the clock is necessar y in order to use the various timer features of the TV . Also, you can check the time while watching the TV . (Just press the INFO button.) 96 Option 1: Setting the Clock Manually 1 Press the MENU button.
97 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “T ime”, then press the ENTER button.
98 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “T ime”, then press the ENTER button. Press the ▲ or ▼ button to select “On T imer”, then press the ENTER button.
99 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “T ime”, then press the ENTER button. Press the ▲ or ▼ button to select “Sleep T imer”, then press the ENTER button.
BN68-00825J-00Eng_(084~113) 5/18/05 2:14 PM Page 100.
PLASMA DISPLA Y P ANEL Function Description Selecting a Menu Language ...................................................102 Digital Noise Reduction .........................................................103 Selecting the Film Mode..................
Selecting a Menu Language 102 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Language”, then press the ENTER button. 3 Press the ▲ or ▼ button to select the appropriate language: “English”, “Spanish”, or “French”.
103 103 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
104 Selecting the Film Mode On: Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality . Off: Switches off the Film mode. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
105 Setting the Blue Screen If no signal is being received or the signal is ver y weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen“ mode to “Off“.
106 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Color W eakness”, then press the ENTER button. 3 Press the ENTER button. Press the ▲ or ▼ button to select “On”, then press the ENTER button.
107 1 Press the Menu button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Caption”, then press the ENTER button. 3 Press the ENTER button to select “Caption”. Press the ▲ or ▼ button to select “On”, then press the ENTER button.
108 V iewing Closed Captions (On-Screen T ext Messages) - Digital The Digital Captions function operates on digital channels. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Caption”, then press the ENTER button.
109 6 Press the ▲ or ▼ button to select “Size”, then press the ENTER button. Press the ▲ or ▼ button to select the desired Caption option, then press the ENTER button. Press the ▲ or ▼ button to select the desired sub-menu options(see options below), then press ENTER.
Menu T ransparency Level Adjusts the transparency of the menu screen. 110 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Menu T ransparency”, then press the ENTER button.
111 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Energy Saving”, then press the ENTER button. 3 Press the ▲ or ▼ button to select submenu (Standard or Super Saving) you want, then press the ENTER button.
Preventing Screen Burn-in To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology . This technology enables you to set picture movement up/down (V ertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes.
113 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Screen Burn Protection”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “All White” or “Signal Pattern”, then press the ENTER button.
1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Function Help”, then press the ENTER button. 3 Press the ▼ button to select “On”, then press the ENTER button.
115 Using the V -Chip (for USA) The V -Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V -Chip restrictions are set up or changed. Notes : ● When the V -chip feature is activated, the PIP features do not function.
How to Enable/Disable the V -Chip 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “V -Chip”, then press the ENTER button. The message “Enter PIN” will appear .
117 How to Set up Restrictions using the “TV Parental Guidelines” First, set up a personal identification number (PIN), and enable the V -Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating.
5 At this point, one of the TV -Ratings is selected. Press the ENTER button. Depending on your existing setup, a symbol will be selected. (Blank = Unblocked, = Blocked) While “ ” is selected, press the ENTER button to block or unblock the categor y .
119 How to Set up Restrictions using the MP AA Ratings: G, PG, PG-13, R, NC-17, X, NR The MP AA rating system uses the Motion Picture Association of America (MP AA) system, and its main application is for movies.
How to Reset the TV after the V -Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V -Chip will block it. The screen will go blank and the following message will appear: 1 Enter your PIN number . To resume normal viewing, tune to a different channel using CH or CH button.
121 Using the V -Chip (for Canada) The V -Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V -Chip restrictions are set up or changed. Notes : ● When the V -chip feature is activated, the PIP features do not function.
How to Enable/Disable the V -Chip 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “V -Chip”, then press the ENTER button. The message “Enter PIN” will appear .
123 How to Set up Restrictions using the “TV Parental Guidelines” First, set up a personal identification number (PIN), and enable the V -Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating.
5 At this point, one of the TV -Ratings is selected. Press the ENTER button. Depending on your existing setup, a symbol will be selected. (Blank = Unblocked, = Blocked) While “ ” is selected, press the ENTER button to block or unblock the categor y .
125 How to Set up Restrictions using the MP AA Ratings: G, PG, PG-13, R, NC-17, X, NR The MP AA rating system uses the Motion Picture Association of America (MP AA) system, and its main application is for movies.
126 How to Set up Restrictions using “Canadian English”: E, C, C8+, G, PG, 14+, 18+ First, set up a personal identification number (PIN), and enable the V -Chip. ( refer to page 122) 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
How to Set up Restrictions using “ Canadian French ”: E, G, 8 ans +, 13 ans +, 16 ans +, 18 ans + First, set up a personal identification number (PIN), and enable the V -Chip. (refer to page 122) 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
How to Reset the TV after the V -Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V -Chip will block it. The screen will go blank and the following message will appear: 1 Enter your PIN number . To resume normal viewing, tune to a different channel using CH or CH button.
129 Electr onic Pr ogram Guide Y our TV has an “Electronic Program Guide” to help you navigate through all the possible viewing options. The EPG supplies information, such as program lists, start and end times of all available channels. In addition, detailed information about the program is often available in the EPG.
130 Using the Electronic Program Guide 1 Press the MENU button. Press the ▲ or ▼ button to select “Guide”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Default Guide”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Mini Guide” or “Full Guide”, then press the ENTER button.
131 Viewing Information about a Single Channel 1 Press the MENU button. Press the ▲ or ▼ button to select “Guide”, then press the ENTER button. 2 Press the ENTER button to select “Mini Guide”. Press the ▲ or ▼ buttons to view information about one channel by time.
Viewing Information about Channels Displays the program time and content for all channels. This function is available only when the program is digital. 1 Press the MENU button. Press the ▲ or ▼ button to select “Guide”, then press the ENTER button.
133 Viewing the Remind List If you have made a scheduled viewing list of programs you would like to see, the channel will be automatically switched to the scheduled program at the scheduled time even if you are watching another program. 1 Press the MENU button.
134 To view the Remind List 1 Press the MENU button. Press the ▲ or ▼ button to select “Guide”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Remind List”, then press the ENTER button. To remove the scheduled programs 1 Press the ▲ or ▼ button to select a program to be removed, then press the ENTER button.
PLASMA DISPLA Y P ANEL Appendix Tr oubleshooting ..........................................................................136 Care and Maintenance ..............................................................137 Specifications ......................
Tr oubleshooting 136 If the TV seems to have a problem, first tr y this list of possible problems and solutions. If none of these troubleshooting tips apply , then call your nearest ser vice center . Problem Poor picture. No picture or sound. Poor sound quality .
137 W ith proper care, your TV will give you many years of service. Please follow these guidelines to get the maximum performance from your TV . Identifying Problems • Do not put the TV near extremely hot, cold, humid or dusty places. • Do not put the TV near appliances that create magnetic fields.
Specifications 138 Exterior design and product specifications are subject to change without prior notice to improve the perfor mance of this product. AC 110 - 120V~, 60Hz ANT 1 - CABLE IN (Cable QAM) .
139 Dimensions (HP-R4272C) JACK P ANEL DET AIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM BN68-00825J-00Eng_(130~143) 5/23/05 10:01 AM Page 139.
140 BN68-00825J-00Eng_(130~143) 5/23/05 10:01 AM Page 140.
141 Dimensions (HP-R5072C) JACK P ANEL DET AIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM BN68-00825J-00Eng_(130~143) 5/23/05 10:01 AM Page 141.
142 BN68-00825J-00Eng_(130~143) 5/18/05 2:18 PM Page 142.
Memo 143 BN68-00825J-00Eng_(130~143) 5/18/05 2:18 PM Page 143.
1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 V alley Road, Suite 201 Mount Arlington, NJ 07856 www .samsung.com Samsung Electronics Canada Inc. Samsung Customer Car e 55 Standish Court Mississauga, Ontario L5R 4B2 www .
An important point after buying a device Samsung HP-R5072C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung HP-R5072C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung HP-R5072C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung HP-R5072C you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung HP-R5072C will certainly help you make a decision on the purchase.
If you already are a holder of Samsung HP-R5072C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung HP-R5072C.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung HP-R5072C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung HP-R5072C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
