Instruction/ maintenance manual of the product HL-T5656W Samsung
Go to page of 76
Register your product at www .samsung.com/global/register Record your Model and Serial number here for future reference. ▪ Model _______________ ▪ Serial No. _______________ Owner ’ s Instructions HL-T5656W HL-T6156W HL-T6756W DLP TV BN68-00630E-Eng_1.
English - 2 © 2007 Samsung Electronics Co., Ltd. All rights reserved. A Guide to Digital TV ● What is Digital T elevision? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set.
English - 3 Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OT A) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However , DTV broadcast channel assignments are different than analog channels.
English - 4 General Information ■ Viewing Position ....................................................... 5 ■ List of Features ......................................................... 6 ■ Checking Parts ........................................
English - 5 General Information Viewing Position T o optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible.
English - 6 Checking Parts Owner ’ s Instructions Remote Control (BP59-00123A)/ AAA Batteries W arranty Card/ Registration Card/ Safety Guide Manual/ Quick Guide Manual Power Cord (3903-000144A) Cloth-Clean Sold Separately Replacement Lamp For purchasing a replacement lamp, ask at a nearby service center .
English - 7 Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. T o use the more advanced features, you must use the remote control.
English - 8 1 POWER Press to turn the TV on and of f. 2 Remote Control Sensor Aim the remote control towards this spot on the TV . 3 Indicator Lights Blinks and turns off when the power is on and lights up in stand-by mode.
English - 9 Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously , such as VCR or DVD players. For more information on connecting equipment, see pages 1 1~17. ➢ The product color and shape may vary depending on the model.
English - 10 Remote Control Y ou can use the remote control up to a distance of about 23 feet from the TV . When using the remote, always point it directly at the TV . Y ou can also use your remote control to operate your VCR, Cable box, DVD player , or Set-T op Box.
English - 11 Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries. ➢ ● Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
English - 12 Connecting Cable TV T o connect to a cable TV system, follow the instructions below . Cable without a Cable Box 1 Plug the incoming cable into the ANT 1 IN (CABLE) terminal on the rear of the TV . ➢ Because this TV is cable-ready , you do not need a cable box to view unscrambled cable channels.
English - 13 Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 11~12). Skip step 1 if you have not yet connected to an antenna or a cable system.
English - 14 Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV . They allow you to view the camcorder tapes without using a VCR 1 Connect a Video Cable or S-Video Cable between the A V IN 3 [VIDEO] or [S-VIDEO] jack on the TV and the VIDEO OUT (or S-VIDEO OUT) jack on the camcorder .
English - 15 Connecting a DVD Player/Set-T op Box via DVI This connection can only be made if there is a DVI Output jack on the external device. 1 Connect a HDMI/DVI Cable or DVI-HDMI Adapter between the HDMI2/DVI IN jack on the TV and the DVI OUT jack on the DVD Player/ Set-T op Box.
English - 16 Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV . 1 Connect an Optical Cable between the DIGIT AL AUDIO OUT (OPTICAL) jack on the TV and the Digital Audio Input jack on the Digital Audio System.
English - 17 Connecting a PC Using the D-Sub Cable 1 Connect a D-Sub Cable between the PC IN [PC] jack on the TV and the PC output jack on your computer . 2 Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer .
English - 18 Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently: 1 Press the POWER button on the remote control. The message Menu language, Shop Mode, Channels and Time will be set. is automatically displayed.
English - 19 Setting the Clock Automatically 9 Press the ◄ or ► button to select Off or On , then the ENTER button. The message Select the time zone in which you live.
English - 20 Adjusting the V olume Press the VOL + or VOL – button to increase or decrease the volume. Using the Mute Button At any time, you can cut off the sound using the MUTE button. 1 Press the MUTE button and the sound cuts off. The word Mute is displayed on the screen.
English - 21 Memorizing the Channels Y our TV can memorize and store all of the available channels for both air and cable channels. After the available channels are memorized, use the CH and CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits.
English - 22 Setting Up Y our Remote Control After your remote control has been properly set up, your remote control can operate in five different modes: TV , VCR, Cable, DVD, or Set-T op Box. Pressing the corresponding button on the remote control allows you to switch among these modes, and control whichever piece of equipment you choose.
English - 23 Setting Up the Remote to Operate Y our Cable Box 1 T urn off your cable box. 2 Press the CABLE button on your TV’ s remote control. 3 Press the SET button on your TV’ s remote control.
English - 24 Remote Control Codes VCR Brand SAMSUNG ADMIRAL AIW A AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MA THES DAEWOO DB DIMENSIA DYNA TECH ELECTRO.
English - 25 Brand SAMSUNG GI HAMLIN HIT ACHI JERROLD MACOM MAGNA VOX OAK P ANASONIC PHILIPS PIONEER RCA REGAL Code 000 001 002 003 004 005 006 007 041 003 024 031 025 030 038 039 025 030 019 023 028 .
English - 26 Product DVD DVDR BD Record VCR COMBO VCR Record DHR COMBO Code 000 001 002 003 004 005 006 007 008 009 010 01 1 012 013 Product Home Theater VCR COMBO HDD Record COMBO TWIN TRA Y COMBO ST.
English - 27 T o Select the Source Use to select TV or other external input sources such as DVD players, VCRs, etc. connected to the TV . 1 Press the MENU button. Press the ◄ or ► button to select Input , then press the ENTER button. Press the ▲ or ▼ button to select Source List , then press the ENTER button.
English - 28 Picture Control Using Automatic Picture Settings Y our TV has three automatic picture settings (“Dynamic”, “Standard”, “Movie”) that are preset at the factory . Y ou can activate a Picture Setting by making a selection from the menu.
English - 29 5 Press the ▲ or ▼ button to select Color T one , then press the ENTER button. 6 Press the ▲ or ▼ button to select Cool2 , Cool1 , Normal , W arm1 , or Warm2 , then press the ENTER button. ➢ When the picture mode is set to Dynamic or Standard , W arm1 and W arm2 cannot be selected.
English - 30 Making Detailed Picture Settings Y ou can set detailed picture settings. 1 Press the MENU button. Press the ENTER button to select Picture . Press the ▲ or ▼ button to select Detailed Settings , then press the ENTER button. 2 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
English - 31 Changing the Screen Size Y ou can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Press the ENTER button to select Picture . Press the ▲ or ▼ button to select Size , then press the ENTER button.
English - 32 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Press the ENTER button to select Picture .
English - 33 Setting the Color Gamut Y ou can choose your favorite color gamut. Color gamut means a color matrix made up with the basic colors of Red, Green and Blue. 1 Press the MENU button. Press the ENTER button to select Picture . Press the ▲ or ▼ button to select Color Gamut , then press the ENTER button.
English - 34 Adjusting the Screen Position Y ou can adjust the horizontal and vertical position of the screen. 1 Press the MENU button. Press the ENTER button to select Picture . Press the ▲ or ▼ button to select Position , then press the ENTER button.
English - 35 Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively , you can use one of the “automatic” settings.) 1 Press the MENU button. Press the ◄ or ► button to select Sound , then press the ENTER button.
English - 36 Setting up DNSe (Digital Natural Sound engine) DNSe enhances the sound quality , automatically controls output, and prevents sound distortion. 1 Press the MENU button. Press the ◄ or ► button to select Sound , then press the ENTER button.
English - 37 Choosing a Multi-Channel Sound (MTS) T rack - Analog Depending on the particular program being broadcast, you can listen to Mono, Stereo, or SAP . Multi-T rack Sound 1 Press the MENU button. Press the ◄ or ► button to select Sound , then press the ENTER button.
English - 38 Automatic V olume Control Reduces the difference in volume level among broadcasters. 1 Press the MENU button. Press the ◄ or ► button to select Sound , then press the ENTER button. Press the ▲ or ▼ button to select Auto V olume , then press the ENTER button.
English - 39 Channel Control Clearing Scrambled Channels - Digital The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed. It removes the scrambled channels from the list by tuning the digital cable channels.
English - 40 3 Press the ▲/▼/◄/► buttons to select a channel to add, then press the ENTER button. 4 Press the ▲ or ▼ button to select Add , then press the ENTER button to add the channel. The symbol appears prior to the corresponding channel number .
English - 41 Labeling Channels - Analog Channels can labeled so that their call letters appear whenever the channel is selected. 1 Press the MENU button. Press the ◄ or ► button to select Channel , then press the ENTER button. Press the ▲ or ▼ button to select Channel List , then press the ENTER button.
English - 42 Setting the Default Channel List Mode Y ou can set All, Added, or Favorite to be the Default List that appears when you press the CH LIST button. 1 Press the MENU button. Press the ◄ or ► button to select Channel , then press the ENTER button.
English - 43 LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENU button. Press the ◄ or ► button to select Channel , then press the ENTER button.
English - 44 Function Description Selecting a Menu Language 1 Press the MENU button. Press the ◄ or ► button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Language , then press the ENTER button. 2 Press the ▲ or ▼ button to select : English , Español , or Français , then press the ENTER button.
English - 45 Continued... 4 Press the ▲ or ▼ button to select DST (Daylight Saving T ime), then press the ENTER button. Press the ▲ or ▼ button to select Off or On , then press the ENTER button. Press the EXIT button to exit. ➢ Depending on the broadcast station and signal, the auto time may not be set correctly .
English - 46 Setting the On/Off Timer Use this feature to set the TV to turn on or off at a desired time. 1 Press the MENU button. Press the ◄ or ► button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Timer 1 , T imer 2 , or Timer 3 , then press the ENTER button.
English - 47 Continued... Using the V -Chip U.S.A Only This product is covered by the following U.S. patents : US4,930,158 US4,930,160 The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed.
English - 48 Continued... Setting Up Y our Personal ID Number (PIN) 1 Press the MENU button. Press the ◄ or ► button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select V -Chip , then press the ENTER button. 2 Press the ▲ or ▼ button.
English - 49 Continued... How to Set up Restrictions Using “TV Parental Guidelines” First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating.
English - 50 5 At this point, one of the TV -Ratings is selected. Press the ENTER button. Depending on your existing setup, the “ ” symbol will be selected. (Blank = Unblocked, = Blocked) While “ ” is selected, press the ENTER button to block or unblock the category .
English - 51 How to Set up Restrictions Using “Canadian English” (for Canada Models) 9 Press the ▲ or ▼ button to select Canadian English , then press the ENTER button. 10 The Canadian English screen will appear . Press the ▲ or ▼ button to select an appropriate restriction.
English - 52 Using the V -Chip for Digital Channels Parental restriction information can be used while watching DTV channels. 13 Press the ▲ or ▼ button to select Downloadable U.S. Rating , then press the ENTER button. ➢ If information is not download ed from the broadcast ing station, the Downloa dable U.
English - 53 Viewing Closed Captions (On-Screen T ext Messages) - Digital The Digital Captions function operates on digital channels. 1 Press the MENU button. Press the ◄ or ► button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Caption , then press the ENTER button.
English - 54 Viewing Closed Captions (On-Screen T ext Messages) - Analog The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.
English - 55 Menu T ransparency Level Adjusts the transparency of the menu screen. 1 Press the MENU button. Press the ◄ or ► button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Menu T ransparency , then press the ENTER button.
English - 56 Using the Color Weakness Enhancement Feature This feature adjusts the Red, Green or Blue color to compensate for the user ’s particular color weakness. 1 Press the MENU button. Press the ◄ or ► button to select Setup , then press the ENTER button.
English - 57 Setting the HDMI Black Level Using this function, you can adjust the image quality when the screen burn (appearance of black level, low contrast, low color , etc.) is encountered by the HDMI input for RGB limited range (16 to 235). 1 Press the MENU button.
English - 58 Setting the Film Mode - Analog Y ou can automatically sense and process film signals and adjust the picture for optimum quality . 1 Press the MENU button. Press the ◄ or ► button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Film Mode , then press the ENTER button.
English - 59 Upgrading the Software Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on the rear of your TV . 1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the rear of the TV .
English - 60 PC Display Using Y our TV as a Computer (PC) Display Setting Up Y our PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card.
English - 61 Display Modes If the signal from the system equals the standard signal mode, the screen is adjusted automatically . If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video.
English - 62 Setting up the TV with your PC How to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC. The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
English - 63 Changing the Screen Position After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned. ➢ Change to the PC mode first. 6 Press the ▲ or ▼ button to select Position , then press the ENTER button.
English - 64 Changing the Picture Size (PC Mode) Y ou can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Press the ENTER button to select Picture . Press the ▲ or ▼ button to select Size , then press the ENTER button.
English - 65 Appendix Identifying Problems If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply , call your nearest Samsung service center. Problem Possible Solution Poor picture quality .
English - 66 Replacing the Lamp Why do I need to replace the lamp? ● The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically . After replacing the lamp, the screen quality will be bright and clear as new .
English - 67 Cleaning and Maintaining Y our TV Please follow these guidelines to get the maximum performance from your TV . Placement ● Do not put the TV near extremely hot, cold, humid or dusty places. ● Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum cleaners.
English - 68 T echnical Specifications The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without notice. Model Name HL-T5656W HL-T6156W HL-T6756W Screen Size (Diagonal) 56 inch 61 inch 67 inch PC Resolution 1920 X 1080 @ 60Hz Sound (Output) 10W x 2 Dimension (W x H x D) 50.
English - 69 The GNU General Public License (GPL) V ersion 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 T emple Place, Suite 330, Boston, MA 021 1 1-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
English - 70 These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
English - 71 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
English - 72 GNU Lesser General Public License (LGPL) V ersion 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 T emple Place, Suite 330, Boston, MA 021 1 1-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
English - 73 “Source code” for a work means the preferred form of the work for making modifications to it. For a library , complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library .
English - 74 Otherwise, if the work is a derivative of the Library , you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.
English - 75 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in cert.
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center . Communiquez avec SAMSUNG WORLD-WIDE Pour toute question ou commentaire se rapportant aux produits Samsung, veuillez communiquer avec le centre de service à la clientèle SAMSUNG.
An important point after buying a device Samsung HL-T5656W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung HL-T5656W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung HL-T5656W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung HL-T5656W you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung HL-T5656W will certainly help you make a decision on the purchase.
If you already are a holder of Samsung HL-T5656W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung HL-T5656W.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung HL-T5656W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung HL-T5656W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
