Instruction/ maintenance manual of the product HL-T5055W Samsung
Go to page of 68
Register your product at www .samsung.com/global/register Record your Model and Serial number here for future reference. ▪ Model _______________ ▪ Serial No.
English - 2 © 2007 Samsung Electronics Co., Ltd. All rights reserved. A Guide to Digital TV • What is Digital T elevision? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set.
English - 3 Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OT A) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However , DTV broadcast channel assignments are different than analog channels.
English - 4 GENERAL INFORMA TION ■ Viewing Position .........................................................5 ■ List of Features ..........................................................5 ■ Checking Parts ......................................
English - 5 ➢ When installing the product, make sure to keep it away from the wall (more than 10cm / 4inches) for ventilation purposes. Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.
English - 6 Checking Parts Owner ’ s Instructions Remote Control (BP59-00123A)/ AAA Batteries W arranty Card/ Registration Card/ Safety Guide Manual/ Quick Guide Manual Power Cord (3903-000144) Sold Separately Replacement Lamp (BP96-01472A) For purchasi ng a replacement lamp, ask at a nearby service center.
English - 7 1 POWER Press to turn the TV on and of f. 2 Remote Control Sensor Aim the remote control towards this spot on the TV . 3 Indicator Lights Blinks and turns off when the power is on and lights up in stand-by mode.
English - 8 Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously , such as VCR or DVD players. For more information on connecting equipment, see pages 12-15. ➢ The product color and shape may vary depending on the model.
English - 9 1 POWER T urns the TV on and off. 2 Numeric Buttons Press to directly select a channel. 3 – Press to select additional channels being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “–” and “3”.
English - 10 Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries. ➢ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
English - 11 Connecting Cable TV T o connect to a cable TV system, follow the instructions below . Cable without a Cable Box 1 Plug the incoming cable into the ANT 1 IN(CABLE) terminal on the rear of the TV . ➢ Because this TV is cable-ready , you do not need a cable box to view unscrambled cable channels.
English - 12 S-Video Connection Y our Samsung TV can be connected to the S-Video jack of a VCR. (This connection delivers a better picture when compared to the regular Video connection above.) 1 T o begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV .
English - 13 Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV . They allow you to view the camcorder tapes without using a VCR. 1 Connect a Video Cable or S-V ideo Cable between the A V IN 3 [VIDEO] or [S-Video] jack on the TV and the VIDEO OUT jack on the camcorder .
English - 14 Connecting a DVD Player/Set-T op Box via DVI This connection can only be made if there is a DVI Output jack on the external device. 1 Connect a HDMI/DVI Cable or DVI-HDMI Adapter between the HDMI 1/DVI IN jack on the TV and the DVI jack on the DVD Player/ Set-T op Box.
English - 15 Connecting a PC Using the D-Sub Cable 1 Connect a D-Sub Cable between the PC IN [PC] jack on the TV and the PC output jack on your computer . 2 Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer .
English - 16 Operation T urning the TV On and Off Press the POWER button on the remote control. Y ou can also use the (Power) button on the front panel. Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently: 1 Press the POWER button on the remote control.
English - 17 Setting the Clock Automatically 9 Press the ENTER button. Press the ▲ or ▼ button to select Off or On , then the ENTER button. The message Select the time zone where you are located.
English - 18 Using the “ - ” Button The - button is used to select stations that broadcast a digital signal. For example, for Channel 7-1, press 7 , then - , and then 1 . ➢ HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal.
English - 19 Memorizing the Channels Y our TV can memorize and store all of the available channels for both “off-air” (air) and cable channels. After the available channels are memorized, use the CH and CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits.
English - 20 4 Press the ▲ or ▼ button to select Analog or Digital , then press the ENTER button. Y ou can select the correct signal source among STD , HRC and IRC by pressing the ▲ or ▼ button, then press the ENTER button. T o memorize the channels, press the ▲ or ▼ button to select Start , then press the ENTER button.
English - 21 Setting Up Y our Remote Control After your remote control has been properly set up, your remote control can operate in five different modes: TV , VCR, Cable, DVD, or Set-T op Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.
English - 22 Setting Up the Remote to Operate Y our DVD 1 T urn off your DVD. 2 Press the DVD button on your TV’ s remote control. 3 Press the SET button on your TV’ s remote control. 4 Using the number buttons on your remote control, enter three digits of the DVD code listed on page 25 of this manual for your brand of DVD.
English - 23 Brand SAMSUNG ADMIRAL AIW A AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MA THES DAEWOO DB DIMENSIA DYNA TECH ELECTROHOME EMERSON FISHER FUNAI.
English - 24 CABLE BOX Brand SAMSUNG GI HAMLIN HIT ACHI JERROLD MACOM MAGNA VOX OAK P ANASONIC PHILIPS PIONEER RCA REGAL Code 000 001 002 003 004 005 006 007 041 003 024 031 025 030 038 039 025 030 01.
English - 25 SAMSUNG DVD Product DVD DVDR BD Record VCR COMBO VCR Record DHR COMBO Code 000 001 002 003 004 005 006 007 008 009 010 01 1 012 013 Brand ANAM AUDIOVOX AUDIOLOGIC ANABA APEX DIGIT AL AIW .
English - 26 T o Select the Source Use to select TV or other external input sources connected to the TV . Use to select the input source of your choice such as DVD players, VCRs, etc. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input , then press the ENTER button.
English - 27 1 Press the MENU button to display the menu. Press the ENTER button to select Picture . 2 Press the ENTER button to select Mode . Press the ▲ or ▼ button to select the Dynamic , Standard , or Movie picture setting, then press the ENTER button.
English - 28 7 Press the ▲ or ▼ button to select Cool2 , Cool1 , Normal , W arm1 , or Warm2 , then press the ENTER button. ➢ When the picture mode is set to Dynamic or Standard , W arm1 and Warm2 cannot be selected.
English - 29 Changing the Screen Size Y ou can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button to display the menu. Press the ENTER button to select Picture . 2 Press the ▲ or ▼ button to select Size , then press the ENTER button.
English - 30 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button to display the menu.
English - 31 Setting the Color Gamut Y ou can choose your favorite color gamut. Color gamut means a color matrix made up with the basic colors of Red, Green and Blue. 1 Press the MENU button to display the menu. Press the ENTER button to select Picture .
English - 32 Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”.
English - 33 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound , then press the ENTER button. 2 Press the ENTER button to select Mode . Press the ▲ or ▼ button to select Standard , Music , Movie , Speech , or Custom sound setting, then press the ENTER button.
English - 34 Setting up DNSe (Digital Natural Sound engine) DNSe enhances the sound quality , automatically controls output, and prevents sound distortion. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound , then press the ENTER button.
English - 35 Choosing a Multi-Channel Sound (MTS) T rack - Analog Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP . Multi-T rack Sound 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound , then press the ENTER button.
English - 36 Selecting the Internal Mute Sound output from the TV speakers is muted. This is useful when you want to listen to audio through your sound system instead of the TV . 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound , then press the ENTER button.
English - 37 Channel Control Clearing Scrambled Channels - Digital The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed. It removes the scrambled channels from the list by tuning the digital cable channels.
English - 38 5 Press the ▲ or ▼ button to select Add , then press the ENTER button to add the channel. Press the MENU button to return. ➢ All added channels will be shown on Added menu. 6 Press the ▲/▼/◄/► buttons to select a channel to delete, then press the ENTER button.
English - 39 5 Press the ▲ or ▼ button to select Favorite , then press the ENTER button. The “ ” symbol will be highlighted and the channel will be set as a Favorite. T o cancel your Favorite channel selection, press the ENTER button until the “ ” symbol disappears.
English - 40 Setting the Default Channel List Mode Y ou can set All, Added, or Favorite to be the Default List that appears when you press the CH LIST button. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel , then press the ENTER button.
English - 41 Fine T uning Analog Channels - Analog Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel , then press the ENTER button.
English - 42 LNA (Low Noise Amplifier) Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel , then press the ENTER button. 2 Press the ▲ or ▼ button to select LNA , then press the ENTER button.
English - 43 HDMI/DVI Input Resolution (Dot X Line) Horizontal frequency (kHz) V ertical frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) 640 x 480 31.47 60.00 25.18 - / - 640 x 350 31.47 70.10 25.18 +/ - 720 x 400 31.47 70.00 28.32 - /+ 800 x 600 37.
English - 44 Adjusting the Screen Quality The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.
English - 45 Viewing the Current Resolution Y ou can get the resolution information of your PC. ➢ Change to the PC mode first. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select PC , then press the ENTER button.
English - 46 Function Description Selecting a Menu Language 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Language , then press the ENTER button.
English - 47 5 Press the ▲ or ▼ button to highlight the time zone for your local area (and to move the highlight to the appropriate time zone on the map of the United States), then press the ENTER button. 6 Press the ▲ or ▼ button to select DST (Daylight Saving T ime), then press the ENTER button.
English - 48 Using the Game Mode When connecting to a game console such as PlayStation TM or Xbox TM , you can enjoy a more realistic gaming experience by selecting game menu. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button.
English - 49 Using the V -Chip U.S.A Only This product is covered by the following U.S. patents : US4,930,158 US4,930,160 The V -Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (Personal ID number) before any of the V -Chip restrictions are set up or changed.
English - 50 ➢ Allow All : Press to unlock all TV ratings. Block All : Press to lock all TV ratings. ➢ The TV -Y , TV -Y7, TV -G, TV -PG, TV -14 and TV -MA have additional options. See the next step to change any of the following sub- ratings. • FV : Fantasy violence.
English - 51 • C : Programming intended for children under age 8. • C8+ : Programming generally considered acceptable for children 8 years and over to watch on their own. • G : General programming, suitable for all audiences. • PG : Parental guidance.
English - 52 Viewing Closed Captions(On-Screen T ext Messages) - Analog The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.
English - 53 Viewing Closed Captions(On-Screen T ext Messages) - Digital The Digital Captions function operates on digital channels. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button.
English - 54 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. TRADEMARK & LABEL LICENSE NOTICE Adjusting the Melody Sound The TV power on/off melody sound volume can be adjusted.
English - 55 Upgrading the Software Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on the rear of your TV . 1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the rear of the TV .
English - 56 Appendix T roubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply , call your nearest Samsung service center. Problem Possible Solution Poor picture quality .
English - 57 Replacing the Lamp Why do I need to replace the lamp? The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically . After replacing the lamp, the screen quality will be bright and clear as new .
English - 58 Cleaning and Maintaining Y our TV Please follow these guidelines to get the maximum performance from your TV . Placement • Do not put the TV near extremely hot, cold, humid or dusty places. • Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum cleaners.
English - 59 Specifications Model Name HL-T5055W HL-T5655W Screen Size (Diagonal) 50 inch 56 inch PC Resolution 1024 x 768 @ 60Hz Sound (Output) 10W x 2 Dimension (W x H x D) 45.43 x 15.63 x 32.30 inches 1 154 x 397 x 820.5 mm 50.87 x 16.33 x 35.67 inches 1292 x 415 x 906 mm Weight 28.
English - 60 The GNU General Public License (GPL) V ersion 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 T emple Place, Suite 330, Boston, MA 021 1 1-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
English - 61 These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
English - 62 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
English - 63 GNU Lesser General Public License (LGPL) V ersion 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 T emple Place, Suite 330, Boston, MA 021 1 1-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
English - 64 “Source code” for a work means the preferred form of the work for making modifications to it. For a library , complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library .
English - 65 Otherwise, if the work is a derivative of the Library , you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.
English - 66 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in cert.
T h i s p a g e i s i n t e n t i o n a l l y l e f t b l a n k . BP68-00626D-00Eng-2.indd 67 2007-04-13 ｿﾀﾈﾄ 2:47:25.
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center . Contacte con SAMSUNG WORLD-WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.
An important point after buying a device Samsung HL-T5055W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung HL-T5055W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung HL-T5055W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung HL-T5055W you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung HL-T5055W will certainly help you make a decision on the purchase.
If you already are a holder of Samsung HL-T5055W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung HL-T5055W.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung HL-T5055W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung HL-T5055W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
