Instruction/ maintenance manual of the product XM-RCV Audiovox
Go to page of 12
FOR USE WITH THE RADIO RECEIVER UNIT (RRU) MODEL XM-RCV INST ALLA TION MANUAL EL E C T R O N I C S C O R P . ® 999 .audiovox .com For Cust omer S er vi c e Vi si t O ur W ebsi t e A t Pr oduct I nf o.
The Audiovox Electronics XM ® Satellite Digital Audio Control And Receiver System (Model SRXM-001) was developed to allow the user to listen to a huge selection of programming supplied by a subscription to XM ® Radio. (XM ® -compatible antenna also required).
INST ALLA TION and WIRING PRECAUTIONS 3 1. To prevent a short-circuit, Be sure to turn off the ignition and remove the negative (-) battery cable, prior to installation.
Satellite Radio Wireless Remote Control Model #SA T-RC Self-tapping Screws (5mm x 15mm) , with Flat Washers and Lock Washers (Used to mount RRU to mounting surface) FM Modulator Control Interface Wire Harness 1 pc. (P/O SAT-COM) 4 Phillips Round Head Screw (4mm x 8mm) w/ External Tooth Washer (Used to mount SCU to mounting surface) 4 pcs.
AUDIO O X SFT 4 7 1 6 5 8 0 9 23 SATELL ITE RADIO RF MODULATOR TO SCU AUD IO O X ANT. TO RADIO TO CAR ANT. R L TO RRU PO WER AU D IO O X TER. SAT. DIN OUT AUDI O O UT R L 5 TYPICAL FM MODULA TED SYSTE.
6 TYPICAL AUXILLAR Y AUDIO SYSTEM INST ALLA TION ANT. TO CAR R AUDIO OX TER. SA T. L AUDIO OUT R DIN OU T TO RAD IO ANT. PO WE R TO RR U AUDIO OX SATELL ITE RADI O RF MODU LATOR L TO SCU AUDIO OX SFT .
7 TYPICAL FM MODULA TED INST ALLA TION f or SRXM-001 SYSTEM COMPONENT LA Y OUT MOUNTING THE FM MODULATOR Install the FM Modulator to the mounting surface with the self-tapping screws (4mm x 12mm). Self-Tapping Phillips Head Screw Ground (BLACK) Attach this wire to the chassis of the car.
PROCEDURE for HORIZONT AL INST ALLA TION of the RRU SYSTEM INST ALLA TION 3. RADIO RECEIVER UNIT (RRU) 2. Determine the mounting location and drill 4x 1/8” (4mm) mounting holes. NOTE: If mounting surface is carpeted, use caution when drilling holes to prevent drill bit from catching on carpet.
Attach a mounting bracket to each side of the RRU, using the 4 Phillips Round Head Screws (4mm x 8mm). Mount the unit in place, using 4 Self-tapping Screws (5mm x 15mm), w/Flat Washers and Lock Washers. Use RTV (silicone sealer) on screw threads or around the holes to prevent moisture intrusion.
Determine the mounting location and drill four 4mm mounting holes. 3. Mount the unit in place, using 4 Self-tapping Screws (5mm x 15mm), w/Flat Washers and Lock Washers. 1. Attach the mounting brackets to each side of the RRU, using the 4 Phillips Round Head Screws (4mm x 8mm).
PROCEDURE for a TYPICAL INST ALLA TION of the SCU USING HOOK & LOOP ADHESIVE T APE (SUPPLIED) 1. Determine where the SCU is to be located (flat surface) NOTE: The chosen position must allow a clear view of the display and easy access to the controls for both the Driver and Passenger of the vehicle.
12 PROCEDURE FOR A TYPICAL BRACKET INST ALLA TION OF THE SCU (Bracket not supplied) © Copyright 2001 Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 1 1788 128-6213A Audiovox suggests this .
An important point after buying a device Audiovox XM-RCV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox XM-RCV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox XM-RCV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox XM-RCV you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox XM-RCV will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox XM-RCV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox XM-RCV.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox XM-RCV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox XM-RCV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
