Instruction/ maintenance manual of the product X10 Audiovox
Go to page of 16
128-7546 1 of 16 -1- Released 9-15-05. Xpr e s s ® Sat ellit e R adio R e ce iv e r XMB10 B o om B o x Us e r G uide.
128-7546 2 of 16 -2- CONTENTS Congratulatio ns ........................................................................................ 3 FCC Regulations ...................................................................................... 4 Cautions and W arnings .
128-7546 3 of 16 -3- Congratulations Thank you for purchasing the Audiovox Xpress XM ® Satellite Radio Boom Box. Y ou are one step closer to experienc- ing the latest innovation in XM ® Satellite Radio. XM ® Satellite Radio will revolutionize your in-home or On-the-Go entertainment.
128-7546 4 of 16 -4- FCC Regulations This unit complies with the interference limits relative to a Class B digital device, applicable under Part 15 of the FCC Rules regarding installation in a residential environment.
128-7546 5 of 16 -5- Setting Up and Installing Y our Kit NOTE: The XM ® signal can be received and pro- cessed virtually anywhere as long as there are no obvious satellite signal obstructions such as high terrain, trees, overhangs, etc. In placing the antenna, therefore, these factors must be taken into account .
128-7546 6 of 16 -6- is also located on the front panel. When the Xpress ® Receiver is installed in the boom box, the 1. PHONES Jack: Accepts a stereo headphone jack to provide private listening capability for the Boom Box. 2. AUX Jack: Accepts an audio input signal from an external audio device.
128-7546 7 of 16 -7- 1. Turn the Boom Box upside down to access the battery compartment. 2. Push the battery cover latches forward and flip up the battery compartment cover to the open position. 3. Insert eight (8) C-Cell batteries observing battery polarity as shown; then close the cover .
128-7546 8 of 16 -8- b. After making sure the connectors and guide pin hole are properly lined up, gently lower the Xpress into the mounting plate, and press down on the Xpress to mate the connectors together . The raised detent on the mounting plate will enter the notch on the rear of the Receiver , indicating the Xpress is properly seated.
128-7546 9 of 16 -9- 5. Installing the Antenna For best reception, the supplied antenna should be placed near a window if in the house or , if outdoors, in an open area and as high as possible; some repositioning may be required to achieve optimum results.
128-7546 10 of 16 -10- T o mount the antenna: a. Plug the antenna into the ANT connector on the back of the XMB10. b. Leave the antenna in place on the Boom Box, or remove the antenna from its mount, uncoil the antenna cable, and place it at the preferred location inside or outside the home.
128-7546 11 of 16 -11- cable; use protective grommets wherever rough openings are encountered. d. If the antenna is mounted outside, route the cable from the antenna position to the interior of the home, working the cable through the basement, under a window sill, etc.
128-7546 12 of 16 -12- Specifications Nominal Output Power per Channel 5.0 Watts Rms T otal Harmonic Distortion (THD) 0.3% at 1 Watt Frequency Response 30Hz to 20kHz Signal-to-Noise Ratio > 65dB Maximum Speaker Impedance 8 Ohms Nominal Headphone Output Impedance 32 Ohms Headphone Output Level 800 mV (Maximum) Headphone Connector Type 3.
128-7546 13 of 16 -13- Maintenance Periodic Inspection The XMB10 Boom Box should be inspected periodically for external damage. At least once every 30 days of use, perform the following checks: 1. Inspect the Receiver connector for loose, bent or broken pins, misalignment, etc.
128-7546 14 of 16 -14- Troubleshooting System does not turn on XMB10 does not operate using batteries Intermittent operation ANTENNA error message NO SIGNAL message No sound from XMB10 speakers Receiv.
128-7546 15 of 16 -15- AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be pr.
128-7546 16 of 16 -16- 128-7546 © 2005 Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788.
An important point after buying a device Audiovox X10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox X10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox X10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox X10 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox X10 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox X10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox X10.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox X10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox X10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
