Instruction/ maintenance manual of the product VOH701 Audiovox
Go to page of 12
Installation Guide ® EL ECTR ON ICS COR P . VOH701 7" Drop Down Video Monitor.
Important Notice It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver's seat, or that is visible directly or indirectly to the operator of the motor vehicle.
MA TERIALS INCLUDED IN THIS P ACKAGE: 1) VOH701 Video Monitor (1 pc) 2) Accessory Harness (P/N 8010730) (1 pc) 3) 2 Pin Power Wire Harness with choke (P/N 1 12B2824) (1 pc) 4) A/V Adapter Cable (1 12B.
GENERAL INST ALLA TION APPROACH: 1) Decide upon system configuration and options that will be installed (i.e.: what component s, VCP , T uner , RF Modulator/external amp, remote headphones, 2 nd VCP , etc.). 2) Review all manuals to become familiar with electrical requirements and hook ups.
VEHICLE PREP ARA TION: 1) Locate an accessory power source (+12v when key is in the ACC. and run positions, and 0v when key is off). Find a suit able location that will provide a good ground. Generally , these wires can be found at the ignition switch or fuse-box.
MINI CONSOLE INST ALLA TION: This page only covers special installation considerations for the mini-console installation. If the video monitor is to be installed with a custom full sized overhead console, refer to page 3.
Roof Roof Support Headliner 5"x9"x3/4" Plywood Block or Optional VOHBKT (4) #8x1" self drilling screws (not supplied) Mini-Console Video Unit (4) #8 flat washers (not supplied) (4).
1) Make the connections to the vehicle for the 2 pin wiring harness. 2) Insert the Circular Mini-Din Connector of the source component harness through the wire tie loop on the main PCB and into the Mini-Din Connector on the main PCB. 3) Pull the wire tie loop tight and cut off the excess.
-7- Red / black - Lamp on Black / red - Lamp common Purple / brown - Lamp Auto T o 12 pin connector on Monitor To constant +12vdc To constant +12vdc Factory Door ajar switch or Body Control computer F.
T roubleshooting: SYMPTOM: No power at Video Monitor Power but no video or sound Picture, but no sound No Infrared remote func- tions for VCP (or other com- ponents) REMEDY : -V erify +12 VDC on Red wire at 2 pin Power Harness behind video monitor .
-9- NOTES.
© Copyright 2003 Audiovox Electronics Corp. 150 Marcus Blvd. Haupp auge, NY 1 1788 128-6882 WWW .aud iovo x.co m For C ust omer Serv ice Vi si t O u r W e b si t e A t Product Inf ormati on, Photos ,.
An important point after buying a device Audiovox VOH701 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox VOH701 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox VOH701 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox VOH701 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox VOH701 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox VOH701, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox VOH701.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox VOH701. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox VOH701 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center