Instruction/ maintenance manual of the product VOH-641 Audiovox
Go to page of 12
VOH-641Drop Down Video Monitor VOH-642 Drop Down TV / Video Monitor Installation Guide OPEN AUTO ON OFF.
Important Notice It is unlawful in most jurisdictions for a per- son to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver's seat, or that is visible directly or indirectly to the operator of the motor vehicle.
MATERIALS INCLUDED IN THIS PACKAGE: 1) VOH-641 Video Monitor with out TV Tuner / VOH-642 Video Monitor with TV Tuner (1 pc) 2) Accessory Harness (P/N 8010730) (1 pc) 3) 12 Pin Power / Signal harness (.
GENERAL INSTALLATION APPROACH: 1) Decide upon system configuration and options that will be installed (i.e.: what components, VCP, Tuner, RF Modulator/external amp, remote headphones, 2 nd VCP, etc.). 2) Review all manuals to become familiar with electrical requirements and hook ups.
VEHICLE PREPARATION: 1) Locate a constant power source (+12v at all times) and an accessory power source (+12v when key is in the acc. and run positions, and 0v when key is off).
MINI CONSOLE INSTALLATION: This page only covers special installation considerations for the mini console installation. If the video monitor is to be installed with a custom full sized overhead console, refer to page 3.
Roof Roof support Headliner 5"x9"x3/4" Plywood Block (4) #8x1" self drilling screws (not supplied) Mini-Console Video unit (4) #8 Flat washers (not supplied) (4) #8x3/4" self .
1) Make the connections to the vehicle for the 12 pin wiring harness. 2) Remove screws on PCB Cover. Open the cover to gain access to Mini-Din Connector on main PCB.
Antenna Dash Ra dio Red R CA (Au dio Right) IR LED: Clean the IR Receive r Wi ndow on th e front of the VCP. Remove Adhesive Backing and Apply IR LED to IR Window o n the Face of the VCP.
Red / black - Lamp on Black / red - Lamp common Purple / brown - Lamp Auto To 12 pin connector on Monitor To constant +12vdc To constant +12vdc Factory Door ajar switch or Body Control computer Factor.
Troubleshooting: Symptom: No power at Video Monitor Power but no video or sound Picture, but no sound Static on TV Stations (Tuner Version Only) No Infrared remote func- tions for VCP (or other com- ponents) Remedy: -Verify +12 VDC on Red wire at 2 pin Power Harness behind video moni- tor.
128-5533C 1999 Audiovox Corp. 150 Marcus Blvd. Hauppauge, NY 11788.
An important point after buying a device Audiovox VOH-641 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox VOH-641 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox VOH-641 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox VOH-641 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox VOH-641 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox VOH-641, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox VOH-641.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox VOH-641. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox VOH-641 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
