Page doesn't exist.

Samsung DV400GWHDWR manual

Instruction/ maintenance manual of the product DV400GWHDWR Samsung

File size: 3.24 mb
Number of pages: 24

Download as PDF

Go to page of 24

Summary of contents each page of manual

Page 1

1 CLOTHES DRYER Technical Information CAUTION All safety information must be follwed as provided in Service Manual of DV456*,DV422*,DV400* . WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power.
Page 2

2 ERROR ITEMS AND DIAGNOSTIC CODES An occurrence of an Error will make a sound of error melody for 5sec and continuously show one of the Error Displays from the following errors. Error Display Trigger Action Taken tE The Thermistor resistance is very low or high.
Page 3

3 TEST MODE Continuous Run Mode: 1. PressWrinklePrevent+DryLevelfor7secduringPowerOnState(NormalUserMode). 2. OnceinContinuousRunMode,display“CC”for1secandthenumberofCyclefor1secand the remaining time for 1 sec in turns.
Page 4

4 Data Display Mode Denition of Temperature Display Mode: - DisplayMode0:Temperaturedata(Celsius) - Display Mode 1 : Average Touch Sensor data for 1 minute - DisplayMode2.
Page 5

5 TROUBLE DIAGNOSIS - As the micom dry machine is congured of the complicate structure, there might be the service call. Below information is prepared for exact trouble diagnosis and suitable repair guide.
Page 6

6 No Problem What To Do 1 Will Not Start or Run • All wires are hooked up to their corresponding terminals. • Dryer is plugged in. • Blown fuse or circuit breaker. • Doorswitchfunctional...doorclosed.Checkforerrorcode3(See Tableforcodedenition).
Page 7

7 No Problem What To Do 8 The igniter does not glow If the igniter does not heat up, remove power and using an ohmmeter, check the following: • Openamesensor • Openigniter • Shorted .
Page 8

8 TROUBLE SHOOTING WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power.
Page 9

9 GAS MODEL TROUBLE SHOOTING WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power.
Page 10

10 TROUBLE SHOOTING WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. Sensor Bars & temperature sensor check Sensor Bars - Disconnect harness and test Pink wirePin4toOrangewirePin5.
Page 11

11 3-WIRE system connections A. External ground connector B. Neutral gr ounding wire (gr een/yellow) C. Center silver -color ed terminal block scr ew D. Neutral wire (white or center wir e) E. ¾” (1.9 cm) UL-listed strain relief 1. Loosen or remove the center terminal block scr ew .
Page 12

12 WIRING DIAGRAM WIRING DIAGRAM WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power.
Page 13

1 SÈCHE-LINGE Informations techniques ATTENTION Toutes les consignes de sécurité gurant dans le manuel de réparation de DV456*, DV422*, DV400* doivent être respectées.
Page 14

2 CODES D'ERREUR ET DIAGNOTICS Lorsqu'une erreur se produit, un signal sonore retentit pendant 5secondes et l'un des messages d'erreur suivants s'ache en continu. Achage de l'erreur Problème Vérication tE La résistance de la thermistance est très faible ou très élevée.
Page 15

3 MODE DE TEST Mode de fonctionnement en continu: 1. AppuyezsurWrinklePrevent(Anti-froissage)etDryLevel(Niveaudeséchage)pendant7secondesavec l'appareilsoustension(moded'utilisationnormale).
Page 16

4 Mode version logicielle Dénition du mode version logicielle: - Permet de retrouver la version logicielle Pour sélectionner ce mode: - Enmodederéparation,appuyezsurTe.
Page 17

5 DIAGNOSTIC DES PROBLÈMES - Lemicomdusèche-lingeestcongurépourunestructurecomplexe,c'estpourquoiilest conseillé de contacter le service après-vente. Lesinformationssuivantesrépondentàundiagnosticprécisetconstituentunguidede réparation adapté.
Page 18

6 N° Problème Procédure à suivre 1 Ne démarre pas ou ne fonctionne pas • Tous les câbles sont branchés sur les bornes correspondantes. • Le sèche-linge est branché. • Lefusibleestgrilléouledisjoncteurestdéclenché.
Page 19

7 N° Problème Procédure à suivre 8 L'allumeur ne s'allume pas. Sil'allumeurnechauepas,coupezl'alimentationetàl'aided'unohmmètre,.
Page 20

8 DÉPANNAGE PROCÉDURES DE TEST DES COMPOSANTS Test des composants électriques (avec ohmmètre)  Résistancedelathermistance10KΩ@25°C(77°F)  Résistance du thermostat 1 < 1Ω  Résistance du thermostat3 < 1Ω - Si la résistance est innie, remplacez le thermostat3.
Page 21

9 MODÈLE À GAZ DÉPANNAGE Capteur radiant (10RS) Valeur ohmique < 1Ω Si la résistance est innie, remplacez le capteur radiant Allumeur (101D) Valeurohmique40à400Ω Si la résistance est innie, remplacez l'allumeur.
Page 22

10 DÉPANNAGE Vérication des capteurs et du capteur de température Capteurs - Débranchez le faisceau et testez le l rose au niveau de la broche4 et le l orange au niveau de la broche5.
Page 23

11 Br anchements à 3FILS A. Connecteur de t erre ext erne B. Fil de t erre neutr e (vert/jaune) C. Vis centr ale argentée du bornier D. Fil neutre (blanc ou central) E Réducteur de t ension ¾” (1,9cm) homologué UL 1. Desserrez ou r etirez la vis centr ale du bornier .
Page 24

12 SCHÉMA DE CÂBLAGE SCHÉMA DE CÂBLAGE AVERTISSEMENT An d'éviter tout risque d'électrocution légère ou mortelle, débranchez le sèche-linge avant de le réparer, sauf si le test nécessite sa mise sous tension. [HUDSON]_Technical_information-03171A-01_CFR.

Read the Samsung DV400GWHDWR manual - avoid problems

An important point after buying a device Samsung DV400GWHDWR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:

to know how to properly use the device
to know how to perform maintenance/ periodic checks of correct operation of the product Samsung DV400GWHDWR
to know what to do in case of failure Samsung DV400GWHDWR

If you have not bought Samsung DV400GWHDWR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung DV400GWHDWR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung DV400GWHDWR you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung DV400GWHDWR will certainly help you make a decision on the purchase.

If you already are a holder of Samsung DV400GWHDWR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung DV400GWHDWR.

However, one of the most important roles played by the user manual is to help in solving problems with Samsung DV400GWHDWR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung DV400GWHDWR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center

Other manuals from the category Clothes Dryer