Instruction/ maintenance manual of the product UTX-ETX Audiovox
Go to page of 8
128-7400A 1 of 8 Y our Alarm and or Remote St art unit has a configurable receiver that allows the transmitter to be programmed to operate the Lock Unlock functions with one transmitter button or with two transmitter buttons (separate Lock/ Unlock). In addition, the receiver also allows driver priority function.
128-7400A 2 of 8 2 THIS P AGE LEFT BLANK INTENTIONALL Y.
128-7400A 3 of 8 completed on the following page, you can turn the ignition switch off and programming with the default button configurations for the first four chan- nels will be complete. TO ENTER THE PROGRAM MODE: Note: Some systems may use a combination push-button LED switch.
128-7400A 4 of 8 transmitter you wish to control Channel 4 output, (Auxiliary Output 1) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 4 output) 10. Within 10 seconds, press and release the valet program switch one time.
128-7400A 5 of 8 (Repeat this for each transmitter you wish to remain stored in the control unit). The receiver stores up to four transmitters. T o be certain all transmitter slots in the receiver are occupied with transmitters you wish to continue to use, and all others are erased, you will have to fill all four receiver slots.
128-7400A 6 of 8 recommended at least every 6 to 8 months, depending upon how frequently the transmitter is used. To replace the transmitter battery: 1. Slide back the lock tab on the back side of the transmitter case in the direction shown on the following page.
128-7400A 7 of 8 Attention: T ransmitter Ordering Department Important: T o help us expedite your order ,please print all of the information legibly and mail this form and your payment according to the instructions below .
128-7400A 8 of 8 8 © 2006 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788 128-7400A.
An important point after buying a device Audiovox UTX-ETX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox UTX-ETX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox UTX-ETX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox UTX-ETX you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox UTX-ETX will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox UTX-ETX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox UTX-ETX.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox UTX-ETX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox UTX-ETX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
