Instruction/ maintenance manual of the product CS29A7SP Samsung
Go to page of 52
COLOUR TELEVISION CS29A11SS/CS29A11SP/CS34A11SS CS34A11SP/WS32A11SS/WS32A11SP CS29M20SS/CS29M20SP/CS29Z4SS CS29Z4SP/CS29A6SP/CS29A7SP Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference.
AA68-03362A-01Eng_Asia 6/10/04 1:44 PM Page 2.
Contents ◆ C ONNECTING AND P REP ARING Y OUR T ELEVISION ■ View of Your Television (depending on the model) ....................................... 5 ■ Infrared Remote Control .....................................................................
Contents (continued) ◆ U SING Y OUR T ELEVISION (continued) ■ Setting the Sleep Timer ................................................................................. 34 ■ Switching the Television On and Off Automatically ......................
V iew of Y our T elevision (depending on the model) Control Panels 1) Power On/Off 2) Standby Indicator 3) Remote Control Sensor 4) Channel Selection 5) Volume Adjustment 6) Menu Display 7) Input source selection ➢ The actual configuration on your TV may be different, depending on your model.
V iew of Y our T elevision (depending on the model) (continued) English-6 Connection Panels Audio Input (R, L) Video Input S-Video Input Side of the TV (RCA Model) Audio Input (R, L) Video Input S-Video Input Side of the TV (SCART Model) Rear of the TV (depending on the model) ΠMONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices.
Infrared Remote Control English-7 ➢ The performance of the remote control may be affected by bright light. TELEVISION STAND-BY DIRECT CHANNEL SELECTION VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF MEN.
Infrared Remote Control (continued) FASTEXT TOPIC SELECTION P P PROGRAMME SELECTION BY NAME SUB PICTURE(PIP) LOCATION SELECTION SUB PICTURE(PIP) SOURCE SELECTION SUB PICTURE(PIP) NEXT CHANNEL PIP ON/O.
You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it.
To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the 75 Ω coaxial socket on the rear of the television.
The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. ➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. 2 Press the “ ” button (On/Off) on the front of the television.
Becoming Familiar with the Remote Control The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu system The following table presents the most frequently used buttons and their functions.
When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. 1 If the television is in Standby mode, press the POWER () button on the remote control. Result : The message Plug & Play is displayed.
To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Setup . Result : The options available in the Setup group are displayed.
You can scan for the frequency ranges available to you (and availability depends on your area). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep. 1 Press the MENU () button. Result : The main menu is displayed.
You can store up to 100 television channels, including those received via cable networks. When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify 1 Press the MENU () button.
9 If you know the number of the channel to be stored, see the following steps. ◆ Press the ▼ or ▲ button to select Channel . ◆ Press the √ button. ◆ Press the ▼ or ▲ button to select C (Air channel) or S (Cable channel). ◆ Press the √ button.
You can exclude the channels you chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All of the channels that you do not specifically choose to skip are displayed during scanning.
Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Channel .
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. 1 Press the MENU () button. Result : The main menu is displayed.
This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, but not noise. This feature is working only weak signal condition, and that is memorized on current channel, additional.
You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Picture . Result : The options available in the Picture group are displayed.
Your television has several settings which allow you to control picture quality. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Picture . Result : The options available in the Picture group are displayed.
Selecting the Color T one 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Picture . Result : The options available in the Picture group are displayed. 3 Press the ENTER () button. 4 Press the ▼ or ▲ button to select Color Tone .
You can select the picture size which best corresponds to your viewing requirements simply by pressing the “P.SIZE () ” button. Depending on the model, the following picture sizes are available: ◆ N ormal , Zoom1 , Zoom2 , 16:9 ◆ 16:9 , Panorama , Zoom1 , Zoom2 , 4:3 1 Press the MENU () button.
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”. 1 Press the MENU () button.
You can select the type of special sound effect to be used when watching a given broadcast. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Sound . Result : The options available in the Sound group are displayed.
The sound settings can be adjusted to suit your personal preferences. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Sound . Result : The options available in the Sound . group are displayed. 3 Press the ENTER () button.
◆ Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed.
The “DUAL I -II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “DUAL-I ” or “STEREO”, depending on the current transmission. ➢ ◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO .
Selecting the Melody You can hear clear melody sound when the television is powered on or off. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Setup . Result : The options available in the Setup group are displayed.
Setting and Displaying the Current T ime You can set the television’s clock so that the current time is displayed by pressing the “INFO () ” button. You must also set the time if you wish to use the automatic on or off timers. ➢ When pressing the “” button (On/Off) on the front of the television, the clock setting will be reset.
Setting the Sleep T imer You can set your TV to automatically turn off after a preset interval. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select S etup . Result : The options available in the S etup group are displayed.
Switching the T elevision On and Off Automatically You can set the On/Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select .
Setting the Preferred V olume Level/Channel The preferred volume and channel can be set for when the timer automatically turns on the TV. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select S etup .
Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD, Set-Top-boxes and the TV source (broadcast or cable) 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ENTER () button to select Input .
You can display a sub picture within the main picture of TV program or external A/V devices such as VCR or DVD. I n this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. 1 Press the MENU () button.
V iewing the Picture In Picture (PIP) (depending on the model) (continued) 10 Press the ▼ or ▲ button to select Size . 11 Select a size of sub picture by pressing the ¦ or button.
V iewing the Picture In Picture (PIP) (depending on the model) (continued) Easy functions of remote control Buttons Feature PIP Used to activate or deactivate the PIP function directly.
Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram).
You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result : The current page counter is incremented and the page is then displayed.
You can store up to four teletext pages to display them later at leisure. 1 Select the LIST mode using the button. Result : Four 3-digit numbers are displayed in different colors. ➢ The button is used to switch between the LIST and FLOF (or FASTEXT) modes.
Connecting to the External Input/Outputs English-44 Rear of the TV (depending on the model) VCR Decoder / Video game device Video disc player Satellite receiver ◆ “ MONITOR OUT (or ) ” is used for the audio/video output of current television programme.
Connecting to the DVD Player (depending on the model) English-45 Connecting to the Audio Output ➢ The “MONIOR OUT” ( L-AUDIO-R ) connectors are used for equipment, such as an audio system (to take full advantage of the Surround sound effect).
Connecting to the RCA Input English-46 ➢ The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment, such as camcorders, video disc players, and some video game devices.
Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input. 1 Check that all the necessary connections have been made. 2 Switch your television on, then press the VIDEO () button repeatedly.
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the television manually. If you move the television to a different position and color patches appear on the.
Memo English-49 AA68-03362A-01Eng_Asia 6/10/04 1:45 PM Page 49.
Memo English-50 AA68-03362A-01Eng_Asia 6/10/04 1:45 PM Page 50.
Memo English-51 AA68-03362A-01Eng_Asia 6/10/04 1:45 PM Page 51.
ELECTRONICS AA68-03362A-01 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
An important point after buying a device Samsung CS29A7SP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung CS29A7SP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung CS29A7SP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung CS29A7SP you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung CS29A7SP will certainly help you make a decision on the purchase.
If you already are a holder of Samsung CS29A7SP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung CS29A7SP.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung CS29A7SP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung CS29A7SP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
