Instruction/ maintenance manual of the product CLP-300 XSG Samsung
Go to page of 159
Manual SERVICE Color Laser Printer CLP-300 Series CLP-300/ XSG Basic Model : CLP-300 Samsung Color Laser Printer The keynote of Product [The keynote of Product] [Series Model] .CLP-300: B/W 16 ppm, Color 4 ppm, SPL-C .CLP-300N: CLP-300 + Network [Resolution] .
ELECTRONICS Samsung Electronics Co.,Ltd. June. 2006 Printed in Korea. VERSION NO. : 1.00 CODE : JC-0164 K * This service manual is a property of Samsung Electronics Co., Ltd. Any unauthorized use of Manual can be punished under applicable international and/or domestic law .
Contents 1 . Precautions 1.1 Safety W arning 1-1 1.2 Caution for safety 1-2 1.3 ESD Precautions 1-5 1.4 Super Capacitor or Lithium Battery Precautions 1-5 2 . Product Specification 2.1 Product Overview 2-1 2.2 Specifications 2-2 2.3 Model Comparison T able 2- 7 3 .
Continued 4.9 CRUM Overview 4-5 4.10 FW Upgrade 4-5 4.1 1 Initailize Flow 4-6 5 . Disassembly and Reassembly 5.1 Precautions When Replacing Parts 5-2 5.2 Parts for Maintenance and Repair 5-3 5.3 Information Related in Disassembly and Assembly 5-5 5.4 Disassembly Procedure 5-10 6 .
Continued 8. Exploded V iews & Parts List 8.1 Main 8-2 8.2 T op Cover 8-3 8.3 Rear Cover 8-4 8.4 Front Cover 8-5 8.5 Main Driver 8-6 8.6 Main Frame 8-8 8.7 LSU Cover 8- 10 8.8 Fuser Unit 8-1 1 8.9 ELA-UNIT OPC DEV 8- 1 2 8.10 ITB Unit 8-1 3 8.1 1 Casstte Unit 8-1 4 9 .
Continued 12. Reference Information 12.1 T ools for T roubleshooting 12-1 12.2 Acronyms and Abbreviations 12-2 12.3 Select a location for the printer 12-4 12.
Precautions Samsung Electronics Service Manual 1-1 1 1 1. Precautions In order to prevent accidents and to prevent damage to the equipment please read the precautions listed below carefully before servicing the printer and follow them closely . 1.1 Safety W arning (1) Only to be serviced by appropriately qualified service engineers.
Samsung Electronics Service Manual Precautions 1-2 1.2 Caution for safety 1.2.1 T oxic material This product contains toxic materials that could cause illness if ingested. (1) If the LCD control panel is damaged it is possible for the liquid inside to leak.
Precautions Samsung Electronics Service Manual 1-3 1.2.3 Handling Precautions The following instructions are for your own personal safety , to avoid injury and so as not to damage the printer (1) Ensure the printer is installed on a level surface, capable of supporting its weight.
Samsung Electronics Service Manual Precautions 1-4 1.2.5 Disregarding this warning may cause bodily injury (1) Be careful with the high temperature part. The fuser unit works at a high temperature. Use caution when working on the printer . W ait for the fuser to cool down before disassembly .
Precautions Samsung Electronics Service Manual 1-5 1.3 ESD Precautions Certain semiconductor devices can be easily damaged by static electricity . Such components are commonly called “Electrostatically Sensitive (ES) Devices”, or ESDs.
Product Specifications Samsung Electronics Service Manual 2-1 2 2 2. Product Specifications 2.1 Product Overview Item(s) Pages Printed Part number Remark Black tone r Approx. Initial : 1,500 page s * CLP-K300A cartridg e Sales : 2,000 pages * Color tone r Approx.
Samsung Electronics Service Manual Product Specifications 2-2 2.2 Specifications Specifications are correct at the time of printing. Product specifications are subject to change without notice.
Product Specifications Samsung Electronics Service Manual 2-3 2.2.2 Controller & S/W ∫∞.
Samsung Electronics Service Manual Product Specifications 2-4 2.2.3 Paper Handling.
Product Specifications Samsung Electronics Service Manual 2-5 2.2.4 Consumables CRU No. of CRUs 6 (C/M/Y/K toner, Imaging Unit, Waste toner container) K toner cartridge: CLP-K300A C toner cartridge: C.
Samsung Electronics Service Manual Product Specifications 2-6 2.2.5 Environment 2.2.6 Options 2.2.7 Accessory S/W APPLICA TION-CD INA-ACCESSORY CBF-POWER CORD BAG PE S/W APPLICA TION-CD MANUAL-(CARD)W.
Product Specifications Samsung Electronics Service Manual 2-7 2.3 Model Comparison T able.
System Overview Samsung Electronics Service Manual 3-1 3 3 3. System Overview This chapter describes the functions and operating principles of the main components.
Samsung Electronics Service Manual System Overview 3-2 Cassette Feeding Method : Cassette T ype Feeding Standard : Center Loading Feeding Capacity : Cassette 150 Sheets(75g/ , 20lb Paper Standard) No .
System Overview Samsung Electronics Service Manual 3-3 3.1.2 EP Process - Structure of EP Process Charger Developer Laser Scanning Unit OPC ITB Unit Eraser Blade Blade Media Path P2: Image on Media P1.
Samsung Electronics Service Manual System Overview 3-4 - System Outline Paper path Exit Fuser ITB OPC LSU Cassette Toner Cartridge Dev-Y Dev-Y Dev-M Dev-M Dev-C Dev-C Dev-K Dev-K Dev-Y Dev-M Dev-C Dev-K Charging Conductive Roller charging Roller resistivity : ~ 10^5 ohm-cm Applied voltage : -1.
System Overview Samsung Electronics Service Manual 3-5 Exposing One polygon motor ( 6 facet ) Single beam LD (1ea) LD wavelength : 785nm Polygon motor rpm : 23747.5 LSU energy : 0.25uJ/cm^2 OPC exposed potential : -50V 1. Exposing is implemented by laser striking on to OPC with uniform potential 2.
Samsung Electronics Service Manual System Overview 3-6 T ransfer 2 Indirect transfer T ransfer voltage : 1 ~ 4.0kV (controllable) Roller diameter : 18.6mm Roller resistivity : ~ 10^7 ohm-cm Belt resistivity : 10^9 ~ 10^1 1 ohm-cm T ransfer unit life : 50 K images 1.
System Overview Samsung Electronics Service Manual 3-7 3.2 Main PBA Description 3.2.1 Main Controller PBA CN4 CN10 CN2 CN7 CN28 CN20 CN24 CN25 CN19 USB RJ45 CN8 CN20 CN24 CN16 CN19 CN15 CN13 CN5 DEVE_.
Samsung Electronics Service Manual System Overview 3-8 3.2.2 Main PBA USB2.0 Device CHORUSm Main Control SoC USB Connector RJ45 SDRAM Network Physical Chip EEPROM 64Kbit Flash Memory OSC5 12MHz OSC2 12MHz OSC6 12MHz OSC4 25MHz USB2.
System Overview Samsung Electronics Service Manual 3-9 1) CHORUSm CHORUSm involves in itself the functions to control ARM Processor Core and various H/W devices. CHORUSm, therefore, controls Main PBA and all engine mechanism, processing the print job received from host and enabling the engine to print image.
Samsung Electronics Service Manual System Overview 3-10 IO Controller 6 Channels, Up to 16MB Address space per Bank Programmable T iming per Bank DMA Controller 6 Channels General Purpose DMA HPVC Con.
System Overview Samsung Electronics Service Manual 3-11 CHORUSm (Internal Block Diagram).
Samsung Electronics Service Manual System Overview 3-12 2) System Memory Block Memory saves program and video data and print jobs received from host. Its volume is 64MB with network function and 32MB without network function. It has no separate device for extension.
System Overview Samsung Electronics Service Manual 3-13 1 1) Clutches Control GPIO Controller built in CHORUSm controls all clutches, which help printer to do print job normally . There are clutch- es such as Paper Pick-up Clutch, Registration Clutch, Developer Home Clutch, ITB Clutch, T2 Clutch, Fuser Clutch, Developer T oner Supply Clutch, etc.
Samsung Electronics Service Manual System Overview 3-14 3.2.4 SMPS(Switching Mode Power Supply) PBA SMPS is consisted of SMPS part which supplies DC power for driving system and AC Heat Control part which supplies power to Fuser . Standard TYPE III is used.
System Overview Samsung Electronics Service Manual 3-15 3.2.5 HVPS(High V oltage Power Supply) PBA HVPS PBA generates high voltage of charger , supply , T1 and T2 which is supplied to Developer , ensuring optimum con- dition for image formation.
Samsung Electronics Service Manual System Overview 3-16 1) Charger V oltage : Charger Function: voltage that charges OPC surface up to ?500V~ -800V . Output voltage: -1.
System Overview Samsung Electronics Service Manual 3-17 3.3 CRUM In the case of Refill T oner Install 1) Perception of Refill Cartridge (when power is on or the cover is closed) End of Life / life spa.
Samsung Electronics Service Manual System Overview 3-18 CRUM Position Cap Agitator Washer Bottle Agitator Seal CRUM Coupling Cap - CRUM.
System Overview Samsung Electronics Service Manual 3-19 3.4 General Description This chapter is the product specification for the CLP-300 Series. The CLP-300 Series is a Color Laser Printer . The CLP- 300 Series series can be expanded to multi functional printer (MFP).
Samsung Electronics Service Manual System Overview 3-20 3.4.5 Interfaces The system supports the following standard interfaces: One USB port - USB v .2.
System Overview Samsung Electronics Service Manual 3-21 3.4.10 Sensor Paper empty (Cassette) 3.4.1 1 CRUMS The CLP-300 Series engine will be equipped with electronics that can read and write data into NVRAMs otherwise known as CRUMs that reside within 1) C, M, Y , K T oner cartridges and 2) Imaging kit(Developer , OPC, ITB).
S/W Structure and Descriptions Samsung Electronics Service Manual 4-1 4 4 4. S/W Structure and Descriptions 4.1 Architecture The belt CRUM interface board is a transmission belt CRUM interface board of the photoelectric Dry Color Laser Printer , mounted on the printer body , making it possible to physically combine the body and the belt CRUM board.
Samsung Electronics Service Manual S/W Structure and Descriptions 4-2 4.4 Network Interface After polling is started, Status Monitor has to know when it stops the polling. For this reason, the Network Printer Server should inform of completing job when the printing job is finished.
S/W Structure and Descriptions Samsung Electronics Service Manual 4-3 In put Pro ce s s Out put P hot o Sensor ( inte nsi ty of ra di at i on ) LED PW M O u tpu t den s i t y LED PW M de c is io n C o.
Samsung Electronics Service Manual S/W Structure and Descriptions 4-4 4.7 Alarm Shortage 4.8 Error status 1. Missing/Invalid Consumables Install Cyan (Magenta, Y ellow , Black) T oner Install Transfer Belt Invalid Cyan (Magenta, Y ellow , Black) T oner Invalid Transfer Belt 2.
S/W Structure and Descriptions Samsung Electronics Service Manual 4-5 4.9 CRUM Overview - Stands for “Customer Replaceable Unit Monitor” - EEPROM is used for CRUM Memory . - CRUM stores various information on consumables (including consumables’ life).
Samsung Electronics Service Manual S/W Structure and Descriptions 4-6 4.1 1 Initailize Flow.
S/W Structure and Descriptions Samsung Electronics Service Manual 4-7.
Disassembly and Reassembly Samsung Electronics Service Manual 5-1 5 5 5. Disassembly and Reassembly 5.1 Precautions When Replacing Parts page(5-2) 5.1.1 Precautions when assembling and disassembling page(5-2) 5.1.2 Precautions when handling PBA page(5-2) 5.
Samsung Electronics Service Manual Disassembly and Reassembly 5-2 5.1.1 Precautions when assembling and disassembling * Use only approved Samsung spare parts. Ensure that part number , product name, any voltage, current or temperature rating are correct.
Disassembly and Reassembly Samsung Electronics Service Manual 5-3 5.2 Parts for Maintenance and Repair 5.2.1 Replacement interval for parts with a limited life Some of the parts in this printer have a limited life, shorter than that of the whole machine.
Samsung Electronics Service Manual Disassembly and Reassembly 5-4 5.2.2 Printer Cleaning A printer should be regularly cleaned, especially if it is used in a dusty environment. This will ensure that print quality remains high and failure due to contamination of printing services is less likely to occur .
Disassembly and Reassembly Samsung Electronics Service Manual 5-5 1) Disassembly of the LSU unit There are no serviceable parts inside the LSU. Alignment of the mirrors is critical. Opening the LSU will allow dust into the laser and significantly reduce print quality .
Samsung Electronics Service Manual Disassembly and Reassembly 5-6 5.3.2 Screws used in the printer The screws listed in the table below are used in this printer .
Disassembly and Reassembly Samsung Electronics Service Manual 5-7.
Samsung Electronics Service Manual Disassembly and Reassembly 5-8.
Disassembly and Reassembly Samsung Electronics Service Manual 5-9.
Samsung Electronics Service Manual Disassembly and Reassembly 5-10 1. Open a Front-Cover and Remove the Imagine Unit. 2. Remove the ITB Unit 1) Pull out the unit toward out side of printer slightly . 2) Lift up the unit gently . 3) Pull out the unit gently .
Disassembly and Reassembly Samsung Electronics Service Manual 5-11 5. Remove the Left Cover . 1. Unscrew 4 screws on the Fuser after open the Rear Cover . 2. Push the Holder Shaft Fuser as shown in Picture. 3. T ake out the Fuser Ass ' y from Printer .
Samsung Electronics Service Manual Disassembly and Reassembly 5-12 1. Follow step 1 through step 3 in Cover Unit Disassembly 2. Lift up the LSU Cover(as shown in Picture) and then take out. 3. Remove 4 screws and then take out the LSU. 5.4.3 LSU(Laser Scan Unit) 1.
Disassembly and Reassembly Samsung Electronics Service Manual 5-13 1. Follow step 1 through step 4 in Cover Unit Disassembly 2. Unscrew 5 screws and then take out the Main Board after plug out all the Harness. 5.4.5 Main Board 1. Follow step 1 through step 4 in Cover Unit Disassembly 2.
Samsung Electronics Service Manual Disassembly and Reassembly 5-14 1. Follow step 1 through step 4 in Cover Unit Disassembly 2. Remove the Main Board 3. Remove the SMPS 4. Unscrew 8 screws and then take out the Drive Ass ’ y. 5.4.7 Drive Ass ’ y 1.
Alignment and Adjustmens Samsung Electronics Service Manual 6-1 6 6 6. Alignment and Adjustments This chapter describes some of the main service procedures including: Using the EDC mode; Clearing paper jam and test patterns. Much of this chapter is also included in the user's guide.
Samsung Electronics Service Manual Alignment and Adjustmens 6-2 6.2 Function 6.2.1 KEY Function There are two keys present. The one is Stop key and the other is Black only key . If users input key value, the key input is transferred via GIP (General Input Port) and the operation to be defined by key value is processed.
Alignment and Adjustmens Samsung Electronics Service Manual 6-3 - Firmware downloads mode function T urn on the printer at the same time that the button is pressed.
Samsung Electronics Service Manual Alignment and Adjustmens 6-4 LED behavior Status LED Black-only T oner-low Status (Green/Red) LED (CMYK)LEDs Green LED ON N/A N/A Ready to receive the data. Green LEDS N/A N/A Receiving the data from the host. LOWL Y BLINK Green LED N/A N/A Printing the page.
Alignment and Adjustmens Samsung Electronics Service Manual 6-5 Assert Error LED Operation The panel LED operation display the line number of assert error occurrence.
Samsung Electronics Service Manual Alignment and Adjustmens 6-6 6.3 Jam Removal When a jam occurs while printing a jam message is displayed on the control panel. * Jam0 In T ray 1: Paper jam in the main cassette. * Jam0 In MP T ray: Paper jam in the MP tray * Jam Inside Printer: Jam 1, Paper is jammed inside the printer .
Alignment and Adjustmens Samsung Electronics Service Manual 6-7 3. Close the rear cover and then open the top cover . 4. Holding the inner cover open, carefully take the jammed paper out of the printer . The inner cover will then close automatically .
Samsung Electronics Service Manual Alignment and Adjustmens 6-8 6.3.2 Tips for A voiding Paper Jams By selecting the correct paper types, most paper jams can be avoided. • Follow the procedures Jam remove. Ensure that the adjustable guides are positioned correctly .
Alignment and Adjustmens Samsung Electronics Service Manual 6-9 6.4 Sample Pattern This product provides several printable test patterns for maintenance purposes. These patterns can be used to aid the diagnosis of print quality problems. 6.4.1 Printing a Demo Page Print a demo page to make sure that the printer is operating correctly .
Samsung Electronics Service Manual Alignment and Adjustmens 6- 10.
Samsung Electronics Alignment and Adjustmens Samsung Electronics Service Manual 6- 11.
Samsung Electronics Service Manual Alignment and Adjustmens 6-1 2 6.5 Periodic Defective Image If an image defects appears at regular intervals on the printed-paper , it is due to a faulty or damaged roller . Refer to the table below and check the condition of the appropriate roller .
Alignment and Adjustmens Samsung Electronics Service Manual 6-1 3 6.6 How to use EDC (Engine Diagnostic Control) Mode EDC Mode is feature that allows the engineer to check the condition of the print engine.
Samsung Electronics Service Manual Alignment and Adjustmens 6-1 4 6.6.3.1 Motor T est 6.6.3.2 Solenoid T est Item Discription Main Motor If motor lock signal is normal, “Successed” message will be displayed. When motor lock signal is abnormal, “failed” message will be displayed.
Alignment and Adjustmens Samsung Electronics Service Manual 6-1 5 6.6.3.3 LSU/ Fuser T est Item Discription LSU Motor If LSU motor lock signal is normal, "Successed" message will be displayed. When LSU motor lock signal is abnormal , failed" message will be displayed.
Samsung Electronics Service Manual Alignment and Adjustmens 6-1 6 6.6.3.4 HVPS T est Item Discription Charger When select key is pushed, DUTY : x%* message will be displayed. And then Left/Right arrow is selected, x% is increased or decreased. And DUTY : x% message will be displayed.
Alignment and Adjustmens Samsung Electronics Service Manual 6-1 7 6.6.3.5 Maintenance 6.6.3.6 Error list and recovery Paper Empty / Paper Mismatch - Load specified paper in the tray 1 Paper does not e.
Samsung Electronics Service Manual Alignment and Adjustmens 6-1 8 - Paper Jam at the paper exit area There is a paper at exit area After cover Open , Paper must be removed, and then close the cover - .
Alignment and Adjustmens Samsung Electronics Service Manual 6-1 9 6.7 Error Message When the printer experiences an error , the control panel will indicate an error message with the indicator lights and the Smart Panel program window will display to show the printer ’s status or errors.
T roubleshooting Samsung Electronics Service Manual 7-1 7 7 7. T roubleshooting 7.1 Procedure of Checking the Symptoms Before attempting to repair the printer first obtain a detailed description of the problem from the customer .
Samsung Electronics Service Manual T roubleshooting 7-2 7.2 T roubleshooting Checklist If the printer is not working properly , consult the following checklist. If the printer does not pass a step, follow the corresponding troubleshooting suggestions.
T roubleshooting Samsung Electronics Service Manual 7-3 7.3 Solving General Printing Problems For problems with the operation of your printer , refer to the table for suggested solutions.
Samsung Electronics Service Manual T roubleshooting 7-4.
T roubleshooting Samsung Electronics Service Manual 7-5.
Samsung Electronics Service Manual T roubleshooting 7-6.
T roubleshooting Samsung Electronics Service Manual 7-7 7.4 Solving Print Quality Problems Dirt inside of the printer or improper paper loading may reduce print quality . See the table below to troubleshoot problems. Light or faded print If a vertical white streak or faded area appears on the page: The toner supply is low .
Samsung Electronics Service Manual T roubleshooting 7-8 Color or Black background If the amount of background shading becomes unacceptable, the procedures below may fix the problem.
T roubleshooting Samsung Electronics Service Manual 7-9 Page skew Ensure that the paper is loaded properly . Check the paper type and quality . Ensure that the paper or other material is loaded correctly and the guides are not too tight or too loose against the paper stack.
Samsung Electronics Service Manual T roubleshooting 7-10 Loose toner Clean the inside of the printer . Check the paper type and quality . Install a new toner cartridge. If the problem persists, the printer may require repair . Contact a service representative.
T roubleshooting Samsung Electronics Service Manual 7-11 7.5 Common Windows Problems "File in Use" message appears during installation. Exit all software applications. Remove all software from the StartUp Group, then restart Windows. Reinstall the printer driver .
Samsung Electronics Service Manual T roubleshooting 7-12 7.7 Common Linux Problems I can't change settings in the configuration tool. Y ou need to have administrator privileges to be able to change global settings. Problem Possible Cause and Solution I am using the KDE desktop but the configuration tool and LLPR won't start.
T roubleshooting Samsung Electronics Service Manual 7-13 I am trying to print a document in Landscape mode, but it prints rotated and cropped. Most Unix applications that offer a Landscape orientation option in their print- ing options will generate correct PostScript code that should be printed as is.
Samsung Electronics Service Manual T roubleshooting 7-14 On my PCL (or GDI) printer , I sometimes get error messages printing instead of my document. Unfortunately , some Unix applications may generate non-compliant PostScript output that may not be supported by Ghostscript, or even the printer itself in PostScript mode.
T roubleshooting Samsung Electronics Service Manual 7-15 7.8 Major Problems T rouble shooting 7.8.1 V ertical Line and Band 7.8.2 V ertical White Line.
Samsung Electronics Service Manual T roubleshooting 7-16 7.8.3 Light Image 7.8.4 Dark Image or black.
T roubleshooting Samsung Electronics Service Manual 7-17 7.8.5 Background 7.8.6 JAM 0.
Samsung Electronics Service Manual T roubleshooting 7-18 7.8.7 JAM 1 7.8.8 Multi-Feeding 7.8.9 Not function of the gear of the fuser due to melting away.
T roubleshooting Samsung Electronics Service Manual 7-19 7.8.10 Paper Empty 7.8.1 1 Cover Open 7.8.12 Defective motor operation.
Samsung Electronics Service Manual T roubleshooting 7-20 7.8.13 No Power 7.8.14 V ertical Line Getting Curved 7.8.15 LSU Error.
Exploded Views & Parts List Samsung Electronics Service Manual 8-1 8 8 8.1 Main 8-2 8.2 T op Cover 8- 3 8.3 Rear Cover 8- 4 8.4 Front Cover 8- 5 8.5 Main Driver 8- 6 8.6 Main Frame 8- 9 8.7 LSU Cover 8- 10 8.8 Fuser Unit 8-1 1 8.9 ELA-UNIT OPC DEV 8- 1 2 8.
Samsung Electronics Service Manual Exploded Views & Parts List 8-2 8.1 Main 0 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 6.
8.2 T op Cover 0 3 8 9 10 11 7 2 1 4 6 5 12 Samsung Electronics Service Manual 8- 3 Exploded Views & Parts List.
Samsung Electronics Service Manual Exploded Views & Parts List 8- 4 8.3 Rear Cover 0 2 7 1 5 4 9 9 8 3 6 8 10.
8.4 Front Cover 0 2 1 Samsung Electronics Service Manual 8- 5 Exploded Views & Parts List.
Exploded Views & Parts List Samsung Electronics Service Manual 8- 6 8.5 Main Driver(1) 0 31 30 29 32 36 34 25 26 27 27 28 37 35 20 7 19 15 2 14 17 16 18 13 12 1 2 3 4 5 8 21 22 23 24 7 6 9 10 11 3.
Main Driver(2) 49 11 23 28 38 42 43 50 49 48 47 49 47 45 46 44 41 42 52 40 39 Samsung Electronics Service Manual 8- 7 Exploded Views & Parts List.
Exploded Views & Parts List 8.6 Main Frame(1) 0 1 2 2 3 3 4 5 6 7 8 8 8 7 9 10 11 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 17 29 30 31 32 33 34 35 Samsung Electronics Service Manual 8.
Main Frame(2) 0 36 37 38 39 40 41 42 43 43 42 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 58-1 58-2 58-3 59 60 61 62 63 64 65 63 Samsung Electronics Service Manual 8- 9 Exploded Views & Parts Lis.
Exploded Views & Parts List 8.7 LSU Cover 0 5 4 4 2 1 6 3 Samsung Electronics Service Manual 8- 10.
Exploded Views & Parts List Samsung Electronics Service Manual 8-1 1 8.8 Fuser Unit 0 15 38 33 32 40 34 17 2 18 14 10 16 22 19 20 21 39 9 8 13 11 3 28 36 4 5 12 35 43 6 31 30 1 29 26 27 7 40 41 37.
Samsung Electronics Service Manual Exploded Views & Parts List 8- 1 2 8.9 ELA-UNIT OPC DEV 0 3 2 10 9 11 6 16 2 15 13 14 12 5.
8.10 ITB Unit 0 9 26 14 9 17 29 13 72 64 61 51 6 25 60 6 6 56 20 59 24 58 41 54 48 52 32 7 22 5 16 50 6 38 38 43 37 37 36 34 68 33 53 40 76 6 6 6 27 31 55 46 57 15 47 6 49 30 35 28 65 44 39 18 42 8 8 .
8. 1 1 Casstte Unit 0 1 2 3 4 5 6 7 6 7 8 9 10 11 12 13 14 14 15 16 17 17 18 19 Samsung Electronics Service Manual Exploded Views & Parts List 8- 14.
Parts List Drawer# SEC-Code Description & Specification Location Service 8.1-1 JC97-02330A MEA UNIT-FRAME;CLP-300,SEC,WORLD,-,-,-,- Z4398 SA 8.1-2 JC63-00842A COVER-M-LEFT SIDE;CLP-300,ABS FR,T2.5,23 Z4399 SA 8.1-3 JC63-00847A COVER-M-DUMMY FRONT;CLP-300,ABS FR,T2.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE 8.5-1 JC61-01450A BRACKET-P-DRIVE MOTOR;CLP-300,SECC,T1.2, SNA 8.5-2 6031-001528 WASHER-PLAIN;POLYMIDE,-,ID6,OD13.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE 8.5-50 6502-000121 CABLE CLAMP;DAMC-101,D7~8,L19,SCP-1,NTR SNA 8.5-51 0205-001003 GREASE-BEARING;NYOGEL788,DAMPING GREASE, SNA 8.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE 8.6-79 6009-001396 SCREW-SPECIAL;PH,+,-,M3,L10.3,ZPC(BLK),S SNA 8.6-5 JC39-00488A CBF HARNESS-MAIN_DRAW;CLP-300,WIRE HARNE Z4477 SA 8.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE 8.8-24 JC39-00500A CBF HARNESS-FUSE_LINK1;CLP-300,WIRE HARN Z4483 SA 8.8-25 JC39-00501A CBF HARNESS-FUSE_LINK2;CLP-300,WIRE HARN Z4484 SA 8.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE 8.10-27 JC61-01541A BUSH-M-TR ITB;CLP-300,POM(AT-15CF),ID6,- SNA 8.10-28 JC61-01542A BUSH-M-IDLER WASTE BELT;CLP-300,POM(M90- SNA 8.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE #N/A 3704-000349 SOCKET-IC;8P,DIP,SN,2.54MM SNA #N/A JC62-00259A SEAL-BOTTLE AUGER;CLP-300,PORON LE-20,-, SNA #N/A JC63-00864A SHIELD-P-SMPS;CLP-300,SECC,T1.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE #N/A JC73-00220A RUBBER-BELT BLACK;CLP-300,NBR,0.7T,-,22, SNA #N/A JC72-00382B PMO-BUSHING FEED;ML-1710,POM(DERLIN 8903 O1102 SA #N/A JC46-00257A S/W APPLICATION-CD;-,CLP-300,PRT DRV,1.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE #N/A JC02-00055A TONER-YELLOW;CLP-300,SAY-7.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE #N/A 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 SA #N/A 2007-000123 R-CHIP;1.5Kohm,5%,1/10W,TP,1608 SA #N/A 2007-000134 R-CHIP;33Kohm,5%,1/10W,TP,1608 SA #N/A 2007-000239 R-CHIP;1.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE #N/A JC61-01508A FRAME-M-DEVE YELLOW;CLP-30.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE #N/A JC62-00324A SEAL-WASTE B;CLP-300,POLY-.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE #N/A JC67-00144A TANK-M-WASTE;CLP-300,ABS(TR557A),T2.0,W1 SNA #N/A JC67-00162A CAP-DUCT;CLP-300,NBR,T0.
Parts List Drawer# SEC-Code Description & Specification Location Service SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE #N/A JC61-01525A GUIDE-M-BUSH IDL ITB L;CLP-300,POM M90-4 SNA #N/A JC61-01545A BRACKET-P-CLEANING OPC;CLP-300,SECC,T1.
Block Diagram Samsung Electronics Service Manual 9-1 9 9 MA I N SM PS IT B J OI N T DE DE V E J OI N T LS U TEMP2 HVPS THERMIST OR EXIT SEN REGI FU S E R CO V ER S/ W TEMP1 BLD C DISP PA N EL PTL WAS TE S E N IN L E T& SW IT CH DR A WER CON.
Connection Diagram Samsung Electronics Service Manual 10-1 10 10 10. Connection Diagram ITB JO I NT NT DE DE V E J O I N T TH ERM I STO R EX IT S ENS O R FUS E R B L D C PT L INL E T & S W IT CH DR A W E R CON.
Schematic Diagram Service Manual 11-1 This Document can not be used without Samsung’ s authorization. Samsung Electronics 1 1. Schematic Diagrams 1 1.
Schematic Diagram Service Manual 11-2 This Document can not be used without Samsung ’ s authorization. Samsung Electronics D 8 C TEST JIG Size 2 B Drawn by R&D CHK S.D.AN MFG ENGR CHK R&D 5 5 8 A 2 67 JTAG 5 C F 2/15 A3 CLP-300(N)/CLX-3160N(FN) F 1 3 CHORUSm(1) Main_V0.
Schematic Diagram Service Manual 11-3 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(3/15) 1 F D 5 RTC 4 C FOR FUTURE MODEL FOR CLX-3160FN MODEL 6 E 67 2402-001049 B CHORUSm(2) MFG ENGR CHK DOC CTRL CHK 3/15 A3 3 A B Digtal Printing Division 7 CLP-300(N)/CLX-3160N(FN) Engineer K.
Schematic Diagram Service Manual 11-4 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(4/15) S0 S1 1 LOW CLX-3160FN ONLY N.C [ VCLK ] [ SYSTEM CLOCK ] C [ RTC ] Digtal Printing Division B B TITLE: Main_V0.
Schematic Diagram Service Manual 11-5 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(5/15) Main_V0.11 6 C D E F 7 34 7 MFG ENGR CHK Size TITLE: Digta.
Schematic Diagram Service Manual 11-6 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(6/15) (1105-001384) (1105-001384) CLX-3160FN 1 B 2 F 256Mbit * 2.
Schematic Diagram Service Manual 11-7 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(7/15) F A 8 B 4 B A TITLE: Digtal Printing Division NOT USED B CLP-300(N)/CLX-3160N(FN) Engineer K.
Schematic Diagram Service Manual 11-8 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(8/15) 1 C Function Ethernet Physical Layer 1 mf0 E 5 CFG1 1 TITL.
Schematic Diagram Service Manual 11-9 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(9/15) 2203-005249 50V CLP-300(N)/CLX-3160N(FN) Size R&D CHK S.D.AN DOC CTRL CHK MFG ENGR CHK B 3 R&D 5 Main_V0.
Schematic Diagram Service Manual 11-10 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(10/15) OPC FOR DEBUG 1 I2C Address Configuration 2 R&D CHK S.
Schematic Diagram Service Manual 11-11 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(1 1/15) 23 67 8 123 4 C D E SmartDAA Interface R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) Engineer K.
Schematic Diagram Service Manual 11-12 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(12/15) 2402-001049 Engineer K.
Schematic Diagram Service Manual 11-13 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(13/15) B 67 B BB 3 CLP-300(N)/CLX-3160N(FN) 67 1% DEVE_HOME,SCF,FUSER THER 3301-001122 Engineer K.C.LEE Drawn by R&D CHK S.
Schematic Diagram Service Manual 11-14 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(14/15) 2 ITB_CLUTCH DEVE & ITB JOINT 50V,10% 50V,10% 56 4 PICK UP DEV_SOL BLDC 1 4 2203-005249 2203-005249 5 50V,10% 50V,10% PTL CLP-300(N)/CLX-3160N(FN) R&D 5 A B Engineer K.
Schematic Diagram Service Manual 11-15 This Document can not be used without Samsung ’ s authorization. Samsung Electronics Main Board(15/15) A 5 B 8 1 6 HVPS C 8 2 SMPS HVPS, SMPS, COVER_OPEN 6 N.
Schematic Diagram Service Manual 11-16 This Document can not be used without Samsung ’ s authorization. Samsung Electronics MAIN PANEL 1 1.2 Panel.
Schematic Diagram Service Manual 11-17 This Document can not be used without Samsung ’ s authorization. Samsung Electronics TONER_CRUM_CONTACT_K 0 00 WASTE LEVEL FROM MAIN BOARD WASTE EMPTY A0 A0 A1.
Schematic Diagram Service Manual 11-18 This Document can not be used without Samsung ’ s authorization. Samsung Electronics ITB_H O ME PTL FROM_DRAW_CON 1 1.
Schematic Diagram Service Manual 11-19 This Document can not be used without Samsung ’ s authorization. Samsung Electronics A A B B C C D D 1 1 2 2 3 3 4 4 Title Size No.
Schematic Diagram Service Manual 11-20 This Document can not be used without Samsung ’ s authorization. Samsung Electronics A A B B C C D D 1 1 2 2 3 3 4 4 Title Size No.
Schematic Diagram Service Manual 11-21 This Document can not be used without Samsung ’ s authorization. Samsung Electronics 1 1.7 HVPS (1/5).
Schematic Diagram Service Manual 11-22 This Document can not be used without Samsung ’ s authorization. Samsung Electronics HVPS (2/5).
Schematic Diagram Service Manual 11-23 This Document can not be used without Samsung ’ s authorization. Samsung Electronics HVPS (3/5).
Schematic Diagram Service Manual 11-24 This Document can not be used without Samsung ’ s authorization. Samsung Electronics HVPS (4/5).
Schematic Diagram Service Manual 11-25 This Document can not be used without Samsung ’ s authorization. Samsung Electronics HVPS (5/5).
Reference Information Samsung Electronics Service Manual 12-1 12 12 12. Reference Information This chapter contains the tools list, list of abbreviations used in this manual, and a guide to the location space required when installing the printer . A definition of tests pages and Wireless Network information definition is also included.
Samsung Electronics Service Manual Reference Information 12-2 12.2 Acronyms and Abbreviations The table below explains the abbreviations and acronyms used in this service manual. Where abbreviations or acronyms are used in the text please refer to this table.
Reference Information Samsung Electronics Service Manual 12-3 LCD Liquid Crystal Display LED Light Emitting Diode LSU Laser Scanning Unit MB Megabyte MHz Megahertz MPBF Mean Prints Between Failure MPF.
Samsung Electronics Service Manual Reference Information 12-4 12.3 Select a location for the printer • Leave enough room to open the printer trays, covers, and allow for proper ventilation.
Reference Information Samsung Electronics Service Manual 12-5 12.4 A4 ISO 19752 Standard Pattern This test page is reproduced at 70% of the normal A4 size.
An important point after buying a device Samsung CLP-300 XSG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung CLP-300 XSG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung CLP-300 XSG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung CLP-300 XSG you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung CLP-300 XSG will certainly help you make a decision on the purchase.
If you already are a holder of Samsung CLP-300 XSG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung CLP-300 XSG.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung CLP-300 XSG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung CLP-300 XSG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
