Instruction/ maintenance manual of the product SS91 Audiovox
Go to page of 8
128-8840 1 of 8 1 1 2 1 3 3 4 5 BUTTON RECEIVER CHANNEL SYSTEM FUNCTION Lock And Arm Alarm, also initiate and terminates *Panic Unlock And Disarm, also initiates and terminates *Panic. Programmable to unlock drivers door and or all doors. Lock and arm/unlock and disarm.
128-8840 2 of 8 2 Although the most common use of the transmitter buttons are shown on the front page of this guide, any button or button combination can be programmed into any receiver channel. Additionally , if all 4 buttons are used and you require access to a 5th channel, you would program a combination of buttons to control the 5th function.
128-8840 3 of 8 3 Flash 2 times, indicating that the unit is ready to accept programming for channel # 2 which is only used for separate lock and unlock button transmitters, and is the disarm/unlock/unlock 2 and panic.
128-8840 4 of 8 4 16) Within 10 Seconds, Press and hold the unlock button (or any unused button(s)) of the first transmitter you wish to control Channel 7 output, (Driver Priority 2) until a long chirp is heard from the siren.
128-8840 5 of 8 5 can add any desired unused transmitter button. This action erases only the button stored of the transmitter you are programming. A ll other codes will remain stored. 2. Enter the transmitter program mode. Using any transmitter button press and hold until a long chirp is heard.
128-8840 6 of 8 6 Remove three #0 philips head screws where indicated to gain access to the CR 2032 battery . Carefully remove transmitter back cover . Carefully remove the discharged battery by sliding it out from under the clip in the direction indicated by the arrow in the diagram below .
128-8840 7 of 8 7 1) Name: _______________________________________ 2)Address: ______________________________________ 3) City: ________________ S tate: _____ Zip Code: ________ 4) T elephone Number: (_____) _______________ 5) T ot al Number Of T ransmitters Required: Cost Per Transmitter is: $75.
128-8840 8 of 8 8 128-8840 © 201 0 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY, 11788.
An important point after buying a device Audiovox SS91 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox SS91 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox SS91 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox SS91 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox SS91 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox SS91, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox SS91.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox SS91. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox SS91 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
