Instruction/ maintenance manual of the product C01 Samsung
Go to page of 46
SiPTel C01 IP Phone User Manual SiPTel C01 IP Phone 5.2E version User Manual 3. 1 . 00.
SiPTel C01 IP Phone User Manual SAFETY INFORMATION Meticulous care had been devoted to ensure the highest safety standards in manufacturing of your SiPTel IP Phone. Safety is the major factor in designs of every set. Bu t, safety is your responsibility too.
SiPTel C01 IP Phone User Manual TABLE OF CONTENTS 1. INTRODUCTION 1.1. Overview 1.2. Features 1.3. Specification 1.4. Structure of SiPTel IP Phone 1.4.1. Keypad 1.4.2. LCD Display 1.4.3. LED Display 1.4.4. Port Structure 2. PRE - INSTALLATION CHECK LIST 2.
SiPTel C01 IP Phone User Manual 4.4.3. Call Setup 4.4.4. Modem 4.4.4.1. Call Options 4.4.5. Time 4.4.6. PSTN 4.4.7. HTTP PROXY 4.5. Information 4.5.1. Network 4.5.2. Version 4.6. BALANCE 4.7. Reboot 5. USING SIPTEL IP PHONE 5.1. Connecting IP Phone to Internet 5.
SiPTel C01 IP Phone User Manual 1. INTRODUCTION 1.1. Overview The SiPTel IP Phone is a single user VoIP (Voice over Internet Protocol) phone for the home or small - medium size businesses. The SiPTel IP Phone supports ITU - T H.323 protocol for voice communication on data lines .
SiPTel C01 IP Phone User Manual • Data Modulation Standards V.90, V.34, V.432bis, V.22bis, V.22, V.23, V.21 and V.23 reversible (Minitel), Bell 212, Bell 103 Dialup Modem V .
SiPTel C01 IP Phone User Manual 1.4. Structure of SiPTel IP Phone 1.4.1. Keypad Figure 1) Keypad Structure of SiPTel IP Phone The description for each key is as follows.
SiPTel C01 IP Phone User Manual ƒ P - Book Ÿ Use d to move the cursor to the left in Phone Book mode. Ÿ Use d to initia te the Phone Book menu. OK Ÿ Use d to complete the input in Phone Book menu. Ÿ Use d to confirm the entered or selected settings.
SiPTel C01 IP Phone User Manual Status F lashing : T rying to find the Gatekeeper. Constant : Registered with Gatekeeper successfully. Call status display : Displayed when the c all is connected successfully. : Displayed when the call isn’t connected.
SiPTel C01 IP Phone User Manual 2. PRE - INSTALLATION CHECK LIST 2.1. Power Requirements § AC Voltage : External power adapter (100V - 240V, 50/60Hz). § Please use only the power adapter provided with the SiPTel IP Phone. § For additional power adapter, plea se ask your product provider.
SiPTel C01 IP Phone User Manual 2.3. User Requirements Before you start, please ask your local ISP or network administrator for an Internet account from User ISP Requirement Common Static IP User IP address Gateway Subnet mask DNS DHCP User PPPoE User User ID Password Dial - up User ISP Telephone number User name Password § H.
SiPTel C01 IP Phone User Manual STEP 2 If t he booting is completed properly, the following display will appear. You can see some Icons, Brand Name, ITSP given VoIP Phone Number, Time, etc.
SiPTel C01 IP Phone User Manual 4. GETTING STARTED WITH MENU 4.1. Call Log This menu allows user to look up the Dialed , R eceived and M issed call s list. User can look up the call lists up to 100 lists. User can make a call by using this call logs, and delete them when not required .
SiPTel C01 IP Phone User Manual STEP 6 You can see the information such as the C aller Name if exists a phone book entry for that number , Date [Date/Month(day)], Time, etc., Press ‘Cancel’ button to move to th e previous screen. STEP 7 Last information is Call duration in minutes [HH:MM].
SiPTel C01 IP Phone User Manual STEP 2 Select Received or Transmitted ( Dialed ) that you want to clear from list. Press ‘Cancel’ button to move to the previous screen. STEP 3 Deleting all the options requires the authentication . Enter your user password .
SiPTel C01 IP Phone User Manual 4.2.1.1. Find the number by Index STEP 1 Sele ct ‘1: Find Number’ to find the telephone number registered in the phone book. Use the navigation key or press the menu number to select the menu, and press ‘OK’ button.
SiPTel C01 IP Phone User Manual 4.2.1.2. Find the number by Name STEP 1 Select ‘1: Find Number’ to find a telephone number from the phone book. Use the navigation key or press the menu number to select the menu, and press ‘OK’ button. Press ‘Cancel’ key to move to the upper menu.
SiPTel C01 IP Phone User Manual 4.2.2. Add This menu is to register a new telephone number into the phone book of IP P hone. The phone numbers can be registered up to 10 0 numbers. STEP 1 Select ‘2: ADD’ menu in PHONE BOOK menu selecti on. Use the navigation key and press OK or press the menu number to select the menu.
SiPTel C01 IP Phone User Manual STEP 1 Select ‘3: Memory Dial’ in the PHONE BOOK menu selection. Use navigations key and press OK or press the menu number to select the menu.
SiPTel C01 IP Phone User Manual STEP 1 Select ‘4.Delete All‘ from PHONE BOOK menu after press MENU button. PHONE BOOK menu can be selected even by pressing ‘P - BOOK’ button just besides CANCEL button. Use navi gations key and press OK button or press the menu number to select the menu.
SiPTel C01 IP Phone User Manual 4.3.1. Ring Selection STEP 1 Select ‘1: Ring Select’ menu in the RING/VOLUME menu . Use navigation key or press the menu number to select the number. Press ‘Cancel’ key to move to the previous display. STEP 2 The cur rent ringing tone will be displayed in the second line of LCD.
SiPTel C01 IP Phone User Manual STEP 2 Adjust the ringing tone volume. Use the navigation key to adjust the volume of the ring tone. Press ‘OK’ button to save the volume setting and to return to the upper menu. Press ‘Cancel’ key to return to the upper menu with out adjusting the volume.
SiPTel C01 IP Phone User Manual STEP 1 Select ‘2: User PWD’ option under ‘My Phone’ Menu Press 2 or select ‘2. User PWD’ using navigation keys and press OK key. STEP 2 The icon will appear. Enter the new password. You can enter password up to 15 digits.
SiPTel C01 IP Phone User Manual 4.4.2.1.1. Static IP User If you are a static IP user, select this menu and setup the static related settings required for using the SiPTel I P Phone. STEP 1 Select ‘1: LAN (Static)’ in menu selection. Press 1 or select ‘1: LAN (Static)’ using navigation keys and press OK key.
SiPTel C01 IP Phone User Manual STEP 5 Enter the DNS Server IP address, and press ‘OK’ button. Enter t he DNS IP Address g iven by ISP and press OK . Here you can give three DNS Addresses of you choice and press OK after each DNS entry. Ex: To enter 202.
SiPTel C01 IP Phone User Manual STEP 2 Select ‘YES’ to select DHCP, and press ‘OK’ button. Use left arrow button from navigation keys to select ‘YES’ option and press OK key.
SiPTel C01 IP Phone User Manual STEP 3 Enter the password for your ADSL ID. Enter the Password related to the User ID of your ADSL / PPPoE. STEP 4 Select ‘YES’ to apply the new setting, and press ‘OK’ button. Use navigation key to select the option YES and wait for a while.
SiPTel C01 IP Phone User Manual STEP 2 Select ‘1. GK Selection[GKx]’ and press ‘OK’ button. Just press OK button here as there will be only one option for selection. Press CANCEL button to leave thing a s it is. STEP 3 Select GK option that are available from GK1 to GK6.
SiPTel C01 IP Phone User Manual STEP 1 Select ‘4. Modem’ from SETUP menu after pressing MENU button . Press 4 or select ‘ 4: Modem’ using navigation keys and press OK key. 4.4.4.1. Edit ing Profile This menu is used to configure the ISP account to be used to connect to a dial - up ISP.
SiPTel C01 IP Phone User Manual STEP 4 Select ‘2 : Tel [101] to enter the telephone number of the ISP Press 2 or use the up and down arrow keys to select the Telephone option and press OK. STEP 5 Enter the telephone number of the ISP for the profile.
SiPTel C01 IP Phone User Manual STEP 9 Enter the password for the ISP of this profile. If you want to edit the existing password, use ‘Delete’ key. Use ‘Menu’ key to tog gle the character input mode. Press OK key after editing the password 4.4.
SiPTel C01 IP Phone User Manual STEP 2 Select your country. This is also important to get proper time displayed on SiPTel screen. Use left and right arrow button in the navigation keys to select your Country press OK key. 4.4.4.3.2. Dial Type STEP 1 Select ‘2: Dial Type’.
SiPTel C01 IP Phone User Manual STEP 2 Enter the Time Out value. The range is 0 ~ 255 minutes. Enter the time - out value, and press ‘OK’ button. 4.4.4.3.4. S peaker This menu is to select whether you will hear the modem connection beep sound or not.
SiPTel C01 IP Phone User Manual STEP 1 Select ‘5.TIME’ from SETUP menu list after pressing MENU key. Use navigation key or press the menu number to select the menu. Press ‘Cancel’ button to move to the upper menu. 4.4.5.1. Time Zon e STEP 1 Select “1: Time Zone’ from TIME menu under SETUP.
SiPTel C01 IP Phone User Manual STEP 2 Select ENABLE / DISABLE as per your area’s requirement. Use navigation key or press the menu number to select the menu.
SiPTel C01 IP Phone User Manual 4.4.6.2. Default Call. Default Call allows you to select whether VOIP or PSTN should work as default when the phone goes off - Hook. This option mainly required when u have both CABLE and PSTN connected t o the same phone for both VOIP and PSTN calls.
SiPTel C01 IP Phone User Manual 4.4.7.1. Proxy IP STEP 1 Select ‘1. IP’ to enter IP Address of your local proxy server . Use navigation key or press the menu number to select the menu. Press ‘Cancel’ button to move to the upper menu. STEP 2 Enter Proxy IP address or DNS name of your local proxy.
SiPTel C01 IP Phone User Manual 4.5. Information This menu is to provide users with the i nformation on the SiPTel IP Phone such as network setting and version, Mac address etc. 4.5.1. Network This menu shows the network status the phone is employed, which includes IP address, subnet mask, default gateway, and DNS etc.
SiPTel C01 IP Phone User Manual STEP 5 You can see the SiPTel IP Phone IP information in the second information display. Use navigation key to see the next information. Press ‘Cancel’ key to return to the upper menu. STEP 6 You can see the subnet mask information in the third information display.
SiPTel C01 IP Phone User Manual STEP 2 Select ‘5: Information’ in menu selection. Press OK button or Press 5 to select . STEP 3 Select ‘2: Version’ from the menu. Press OK button or Press 2 to select. Press ‘Cancel’ key to return to the upper menu.
SiPTel C01 IP Phone User Manual STEP 2 You will see following screen while it attempts to get your acc ount balance. It may take few seconds dependi ng on the speed of internet to get the account balance. Please wait for a moment. STEP 4 You will see the account balance there after.
SiPTel C01 IP Phone User Manual 5. Using SiPTel IP Phone 5.1. Connecting IP phone to I nternet 5.1.1. Using in Dial - up Mode STEP 1 P ress @ ISP button on the key pad of SiPTel IP Phone. The built - in modem will try to c onnect to the dial - up ISP preset in Modem setup.
SiPTel C01 IP Phone User Manual STEP 5 If you can see the following display, you can dial the destination number to make a call. Please wait till the SiPTel IP Phone can be registered with the Gatekeeper of ITSP. If you can see constant top lef t display , you can dial the number.
SiPTel C01 IP Phone User Manual STEP 2 Pick up the handset or Press Speaker button. The call will be dialed to the destination number automatically. Pleas e wait till the call is placed successfully. STEP 3 If the call is connected to the destination TEL number, the duration of the ongoing calls will appear on the LCD display.
SiPTel C01 IP Phone User Manual STEP 3 If the call is connected to the destination party successfully, the call starting time, an d call duration time will be displayed on the LCD. If you can see the icon on the LCD, you can start to speak over the phone.
SiPTel C01 IP Phone User Manual 5.5. Making a call in Call Log mode STEP 1 Press ‘Call Log’ button, or press ‘MENU’ and select ‘1: Call Log’. STEP 2 Select either ‘Received Calls’, ‘Dialed Calls’, or ‘ TX /Rx Calls’ etc., STEP 3 Select the desired number.
An important point after buying a device Samsung C01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung C01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung C01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung C01 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung C01 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung C01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung C01.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung C01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung C01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
