Instruction/ maintenance manual of the product Rear Observation System Package RVMPKG2 Audiovox
Go to page of 15
1 Rear Observation System Package Model RVMPKG2 Installation Manual Features: • Rearview Mirror with 4” LCD • 2 Built in Speakers • Rearview Camera Input • Auxiliary Video Input • Video Sy.
2 TABLE OF CONTENTS Caut ions! ............................................................................................ 3 Preface ............................................................................................... 4 WARNING: ..........
3 Cautions! 1. The product is intended to assist in safe driving and to allow the driver to have a broader rearview while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to the country and their local traffic regulatio ns.
4 Preface There is a blind spot that exists at the back of a vehicle while the vehicle is in reverse. Equipped with a camera, this rearview mirror/monitor ensures safety by providing the driver with a clear and wide image of the area behind the vehicle whil e it is in reverse.
5 1. Installation Instructions (1) Mount the mirror/monitor onto the existing rearview mirror. a) Stick two adhesive foam backings on to the back of mir ror in the two small rectangle indents. b) Take the two seven inch belts and slide them into the slots on the top rear of the mirror with grooved side of the belt facing down.
6 Figure 3 e) Cut off the excess part of the 7 - inch strap (2) Plug the Mitsumi connector from the Audiovox navigation monitor cable (part #112C3080) into the receptacle at the top backside of the mirror/monitor screen. Route the rest of the monitor cable to the Navigation computer.
7 (2) Tear off the adhesive tape on the back of the hands free seat. Press tightly to seat on to the selected surface for 30 seconds till the two surfaces are tightly glued. NOTE: Make sure the two surfaces are glued tightly! (3) Clean a place on the back of the cell phone, keeping it dry.
8 3. Signal Inputs The signal input connections for the system include: (1) Rear Camera: By connecting rear camera wi th control box plug, users can see the rearview when the vehicle is in reverse. (2) Hands Free Jack: Put the hands free plug (3.5mm) into hands free jack and put the other side of plug into the headphone jack of the mobile phone.
9 Figure 5 Figure 6 4. Controls and Indicators Figure 6 illustrates the controls and indicators of the RVMPKG2 rear view mirror: A : Rearview mirror B : 4” LCD panel C : Hands free Microphone D : Br.
10 L : Infra - RED receiver for M : 3 - position switch for Navigation Navigation remote control voice command display timer on rear of mirror (30 sec., 150 sec., 300 sec.) N: 2 - position switch for hands free microphone sensitivity High/Low select SW1 , SW2 and SW 3: 1.
11 3. Vehicle Parked: SW1: Used to turn the LCD on/off when using the AUX video and audio input. The park ing brake must be engaged. SW2: Used to turn off and on the Navigation image. SW: 3 When pressed and held, the rear camera image appears on the mirror.
12 Specifications General Power Supply 12VDC Power Consumption <12W Current Draw <500 mA Video Input 1Vp - p@ 75 Impedance Audio Input <=1V Audio Power Output 0.5W × 2 (16 O) Operating Temperature - 10 ° C to 60 ° C Overall Dimension 11W × 3.
13 Maintenance Maintenance Your r earview mirror requires little care, however to maintain it in optimum condition follow the procedures below: 1. Keep your system away from excessive moisture, extreme heat or cold and magnetic fields. 2. Keep liquids away from the display.
14 Table 2 Ha nds Free Phone Symptoms Solutions When the Hands Free Phone Function is not working? 1. Check the volume control knob whether the volume is set too low. 2. Check to see if the hands free cable plug to the phone hand set input jacket is properly connected.
15 © 2003 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 128 - 6655.
An important point after buying a device Audiovox Rear Observation System Package RVMPKG2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox Rear Observation System Package RVMPKG2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox Rear Observation System Package RVMPKG2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox Rear Observation System Package RVMPKG2 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox Rear Observation System Package RVMPKG2 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox Rear Observation System Package RVMPKG2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox Rear Observation System Package RVMPKG2.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox Rear Observation System Package RVMPKG2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox Rear Observation System Package RVMPKG2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
