Instruction/ maintenance manual of the product Rampage AA-939 Audiovox
Go to page of 12
REMOTE CONTROL AUTO SECURITY SYSTEM WITH STARTER INTERRUPT, PARKING LIGHT FLASH AND BUILT IN 2 STAGE SHOCK SENSOR SYSTÈME ANTIVOL À TÉLÉCOMMANDE AVEC BLOCAGE DU DÉMARREUR, CLIGNOTEMENT DES FEUX D.
CONGRA TULA TIONS On the purchase of your new Audiovox Alarm System. T aking a few minutes to read this installation and owners guide will provide you with the detailed information concerning all the features of your new alarm system. MOUNTING THE SIREN: 1.
-3- B. Pass the switch through the hole from behind the panel, and secure from the front using the split lockwasher and hex nut provided. Mounting the Starter Interrupt Relay The relay will be mounted in the passenger’s compartment. Mount the relay close to the wires from the ignition switch.
-4- YELLOW wire will be routed toward the fuse panel. Caution should be used when routing wires. Keep wires away from all hot surfaces, and any moving parts of the vehicle (radiator fans, accelerator or brake pedal linkage, etc.). When routing wires through the firewall, be sure to pass the wires through an existing rubber grommet.
-5- CAUTION ! Be sure these wires are securely connected, and properly insulated. If this connection separates, the vehicle will not start, even when using the ignition key. Connection Method B; A. “Fuse clip” terminals, which will plug in with the contacts of the fuse, are available at most electronics stores.
-6- COMPLETING THE INSTALLATION You will notice (3) additional wires, which come directly out of the rubber wire exit boot from the siren control module, and are not part of the main harness. These wires are used to customize the installation, and are required in some vehicles.
-7- r e - program the transm itters, repeat the above procedure. OPERA TING YOUR SYSTEM: ARMING: 1. Exit your vehicle, and close all entry points. 2. Press button #1 of your keychain transmitter 1 time. The siren will emit a single tone indicating that the system is armed.
TESTING THE VOL T AGE SENSOR: 1. Arm the alarm system by pressing button #1 of a programmed transmitter one time. The siren will chirp once confirming that the system is armed. 2. Wait 4 seconds to allow the unit to stabilize. 3. Open any light activated entry point, the siren will immediately trigger .
of 8 different sensitivity levels. T o adjust or change the setting of your shock sensor dis- arm the system and within 8 seconds, simulta- neously press both buttons of your transmit- ter until the siren emits a low tone. This indi- cates that the unit is ready to accept a sensi- tivity level change.
1 CHIRP AND 1 P ARKING LIGHTS FLASH = SYSTEM ARMED 2 CHIRPS 2 P ARKING LIGHTS FLASH = SYSTEM DISARMED 4 CHIRPS 3 P ARKING LIGHTS FLASH = SYSTEM DISARMED AND HAD BEEN TRIGGERED OPERA TION A T A GLANCE:.
-1 1-.
© 2000 Audiovox Corp., Hauppauge, N.Y . 1 1788 128-5791A AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, und.
An important point after buying a device Audiovox Rampage AA-939 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox Rampage AA-939 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox Rampage AA-939 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox Rampage AA-939 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox Rampage AA-939 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox Rampage AA-939, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox Rampage AA-939.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox Rampage AA-939. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox Rampage AA-939 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
