Instruction/ maintenance manual of the product APC3240C Samsung
Go to page of 36
ENGLISH OWNER’S INSTRUCTIONS & INST ALLA TION MANUAL MANUAL DE INSTRUCCIONES & MANUAL DE INST ALACIÓN MANUEL D’UTILISA TION & MANUEL D’INST ALLA TION SPLIT - TYPE P ACKAGED AIR COND.
Safety Precautions The following safety precautions must be taken when using your air conditioner . 1 Make sure that the indoor unit is correctly ventilated at all times; do NOT place clothing or other materials over it. 2 NEVER spill liquid of any kind into the indoor unit.
Contents ◆ P REP ARING YOUR AIR CONDITIONER ■ Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ■ View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
V iew of the Unit Indoor Unit Outer Air Flow Blades Inner Air Flow Blades Control Panel (refer to page 5) Air Filter (Inside) Air Inlet How to open the front panel ◆ Hold the upper part of the front panel, then pull it slightly forward.
Outdoor Unit Air Outlet Connection V alve Control Panel Air Inlet(Rear) T emperature setting Remote control sensor Fan speed indicators Operating indicators Fan speed selection button On/Off button T .
Remote Control - Buttons and Display Operating mode ( AUTO, COOL, DR Y , F AN ) Remote control transmission indicator Mode selection button (AUTO, COOL, DR Y , FAN) T urbo/Sleep/Long mode selection bu.
G etting Started Y ou have just purchased a packaged air conditioner and it has been installed by your installation specialist. Y our Owner’ s Instructions contains valuable information on using your air conditioner . Please take the time to read it as it will help you take full advantage of the unit’ s features.
Inserting the Remote Control Batteries Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it. Insert the two batteries, taking care to respect the polarities : ◆ + on the battery with + on the remote control.
Selecting the Automatic Operating Mode Y ou can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the optimum fan speed is selected automatically . Y ou can adjust the standard temperature but not the fan speed.
Cooling Y our Room 1 If necessary , press the (On/Off) button. Result : ◆ The POWER indicator on the indoor unit lights up. ◆ The air conditioner starts up in the mode selected when the unit was last used.
Removing Excess Humidity Y ou can change modes at any time. N N N N o o o o t t t t e e e e If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary , press the (On/Off) button.
Changing the Room T emperature Quickly The T urbo cooling function is used to cool your room as quickly as possible. E E E E x x x x a a a a m m m m p p p p l l l l e e e e : Y ou have just come home and find that the room is very hot. Y ou wish to cool it down as quickly as possible.
Selecting the Long Function Y ou can use the Long cooling function when you wish to make the cool air run to every corner in your room, especially when you are away from the air conditioner . 1 If necessary , press the (On/Off) button. Result : ◆ The POWER indicator on the indoor unit lights up.
Airing Y our Room If the atmosphere in your room is stale, you can air the room using the Fan feature. 3 Select the fan speed by pressing the F AN button one or more times until the required setting is displayed: Low Medium High Result : Each time you press the F AN button, the indoor unit beeps.
Adjusting the Air Flow Direction V ertically Adjusting the Air Flow Direction Horizontally Y ou can adjust the position of the outer air flow blade on the upper part of the unit, thus increasing the efficiency of the air conditioner . 1 Press the button one or more times as required.
Setting the On T imer If you want to turn on the air conditioner before the timer reaches the setting time, press the (On/Of f) button. N N N N o o o o t t t t e e e e The On T imer enables you to switch on the air conditioner automatically after a given period of time.
Setting the Off Timer The Off T imer enables you to switch off the air conditioner automatically after a given period of time. Y ou can set the period of time from 30 minutes to 24 hours. T o set the operating time, press the OFF TIMER button one or more times until the required time is displayed.
Setting the Sleep Timer The Sleep T imer can be used when you are cooling your room to switch the air conditioner off automatically after a period of six hours. N N N N o o o o t t t t e e e e If you wish to switch the unit off at a specific time, refer to page 17.
Operating Recommendations Here is a recommendation that you should follow when using your air conditioner . Power failure If a power failure occurs when the air conditioner is operating, the unit is switched of f. When the power returns, the air conditioner start up again automatically .
T emperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used. If the air conditioner is used at... Then... High temperatures The automatic protection feature may be triggered and the air conditioner stopped.
Cleaning Y our Air Conditioner N N N N o o o o t t t t e e e e ◆ If you have not used the air conditioner for a long period of time, set the fan going for three to four hours to dry the inside of the air conditioner thoroughly . 1 Hold the upper part of the front panel, then pull it slightly forward.
Solving Common Problems Explanation/Solution ◆ Check that the breaker used for the air conditioner is switched on. ◆ Check that the POWER indicator on the indoor unit is on; if necessary press the (On/Of f) button on the remote control. ◆ Check whether the TIMER indicator on the indoor unit is switched on.
T echnical Specifications E- 23 ENGLISH MODEL INDOOR UNIT OUTDOOR UNIT APC3240C Performance Ratings Capacity Cooling SEER Moisture Removal Air FLOW(Cooling, HIGH) Sound Rating-Outdoor Btu/h Pts/h CFM dB 30000 10.0 6.5 636 64 208-230V~, 60Hz 16 3250 Flare 9.
Contents ◆ S ELECTION OF I NST ALLA TION P LACE ■ Indoor Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 ■ Outdoor Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 ◆ E LECTRIC W ORK .
E- 25 ENGLISH Less than 150mm (5 ) 8 7" 60mm (2 ) 8 3" Refer to page 31 for detailed procedures. ▼ ▼ 1. Drain check 2. Drilling a hole in the wall Absolute Checkpoints ➧ Be sure to read the installation manual carefully to ensure sufficient realization of the excellent performance of the unit.
E- 26 SELECTION OF INST ALLA TION PLACE Indoor Unit Outdoor Unit ❈ If there is any unavoidable reason to install the unit at such a place, take the following measures against the wind; 1. When installing the unit at a roadside concentrated with buildings, install it parallel with the road.
E- 27 ENGLISH Power Sub switch Fuse Electric wire Allowable voltage Single phase 208-230V~, 60Hz 30A 30A 3.5mm 2 5.5mm 2 187V~253V Below 20m(65 Below 50m(164 ft) ft) 5 8 1 16 ELECTRICAL WORK The electrical work should be performed by a specialist qualified for the work.
E- 28 INST ALLA TION METHOD 660mm (26") 335mm ( 13 ) 16 3 " Anchor bolt fixing dimensions Outdoor Unit ❏ When using the anchor bolt 1. Fix the unit on a flat, rigid floor using the anchor bolt. (Anchor bolt : M10 x 4 points - separately purchased) Installation Procedures 1.
E- 29 ENGLISH 3. Install the high pressure pipe to the heat exchanger liquid pipe, and the low pressure pipe to the heat exchanger gas pipe respectively using the flare nut, taking care not to cause any leakage of refrigerant. 4. Be sure to insulate the pipe with appropriate insulation material.
E- 30 INST ALLA TION METHOD Connection of Refrigerant Piping A D Final T orque 450kg • cm (31.7ft • lb) 750kg • cm (52.8ft • lb) Remarks Outer Diameter ø 9.52mm(3/8") ø 15.88mm(5/8") T ightening T orque 400kg • cm (28.2ft • lb) 700kg • cm (50.
E- 31 ENGLISH Drain Hose Connecting the pipe Drilling a Hole in the W all ◆ Drill a hole of 60mm(2 ") in diameter to the outside. ◆ The drilling should be done at a distance of less than 150mm(5 ") from the floor facing the indoor unit.
E- 32 AIR PURGE ◆ The air in the indoor unit and in the pipe must be purged. If air remains in the refrigeration pipes, it will affect the compressor , reduce to cooling capacity and could lead to a malfunction. Use V acuum Pump as shown at the figure.
E- 33 ENGLISH REFRIGERANT CHARGING Air purge(at the time of new installation only) Close the gas pipe side valve by turning it clockwise. Connect the pressure gauge to the low pressure side service valve, and then open the gas pipe side valve again. Connect it to the refrigerant filling tank.
E- 34 CHECK AND TEST OPERA TION Check ◆ Be sure to check the following again after completion of installation. 1. Check the piping connection area for any gas leakage. 2. Is the drain hose properly connected? 3. Is the insulation of the piping in good condition? 4.
E- 35 ENGLISH T est Operation ◆ After checking, read the owner ’ s instructions carefully , and perform a test operation. Then deliver the unit to the customer . (When delivering the unit, be sure to read carefully and follow the contents of the owner ’ s instructions.
ELECTRONICS Printed in Korea THIS AIR CONDITIONER IS MANUF ACTURED BY : ESTE AIRE ACONDICIONADO HA SIDO F ABRICADO POR: CE CLIMA TISEUR EST FABRIQUE P AR:.
An important point after buying a device Samsung APC3240C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung APC3240C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung APC3240C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung APC3240C you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung APC3240C will certainly help you make a decision on the purchase.
If you already are a holder of Samsung APC3240C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung APC3240C.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung APC3240C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung APC3240C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
