Instruction/ maintenance manual of the product PRO9642CH Audiovox
Go to page of 8
128-6622 1 of 8 Model PRO-9642CH Owner's Manual FEA TURES: w 2 Three Button Programmable RF Transmitters w Three Channel Receiver (capable of accepting 4 transmitters) w Code Hopping T echnology .
128-6622 2 of 8 NOTE: Y our system has the option of using a siren, the vehicle horn, or both for the sounding device. Where the siren is referenced below , the horn or both may in fact chirp, or beep. ARMING THE SYSTEM - ACTIVE 1. Turn off the engine, exit the vehicle and close all doors, hood lid, and trunk lid.
128-6622 3 of 8 Page 3 o Doors Lock - Optional Door locking during passive arming is a selectable feature. The alarm can be programmed to allow the doors to lock only when arming using the keychain transmitter and they will not automatically lock during passive arm- ing.
128-6622 4 of 8 Page 4 SILENT DISARMING 1. As you approach the vehicle, press and hold the Disarm / Unlock button on the keychain transmitter for 2 seconds. þ Red dash mounted LED turns off. If passive arming was selected during the installation, then the LED will start flashing rapidly , indicating that the system is re-arming automatically .
128-6622 5 of 8 Page 5 hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions are bypassed, however the remote panic feature and remote door locks will remain operational.
128-6622 6 of 8 Page 6 If the new code was accepted, the unit will report back the newly entered code, by flashing the LED, first indicating the 10ths digit, pause and then the units digit. The unit will report the new code three times with a one second pause between each code, then the system will begin arming.
128-6622 7 of 8 NOTE: The siren will sound. 2 ) Within 5 seconds, press and release the pushbutton switch 1 time. 3 ) Within 5 seconds, turn the ignition switch off then on. 4 ) Within 5 seconds, press and release the pushbutton switch 1 time. 5 ) Turn the ignition switch off then on and start the vehicle.
128-6622 8 of 8 DASH LED INDICA TORS RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = ARMED OFF = DISARMED ON SOLID = V ALET MODE 3 FLASH...P AUSE = INTRUSION ZONE 3 2 FLASH.
An important point after buying a device Audiovox PRO9642CH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO9642CH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO9642CH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO9642CH you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO9642CH will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO9642CH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO9642CH.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO9642CH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO9642CH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
