Instruction/ maintenance manual of the product PRO9232 Audiovox
Go to page of 8
Congratulations on your purchase of the PRO 9232 automotive Keyless Entry Upgrade Alarm System. The PRO 9232 is a state - of - the - art auto security system that is designed to automatically arm and disarm when it receives a command from your existing Factory Keyless Entry Transmitter.
3 . In 30 seconds, you will hear a single short chip from the siren, and the vehicle’s parking lamps will flash one time, indicating that the system has ARMED. At this time, the red dash mounted L.E.D. will begin to flash slowly, providing a visual indication that the system is fully armed.
rapid flashing of the red dash mounted L.E.D. Opening one of the vehicle’s doors will suspend the passive arming process until all doors have been closed, or until the ignition key has been turned on. INTRUSION WARNING SIGNALS : The system will inform you if an intrusion attempt has occurred while you were away from the vehicle.
2 . Turn the ignition switch to the “On” position. 3 . Press and hold the valet/override pushbutton switch for 5 seconds. The L.E.D. turns on, indicating valet mode has been successfully entered. TO EXIT VALET: With the ignition switch in the on position, press and release the valet/override pushbutton switch one time.
different code than was pre-assigned from the factory . T o Change the pre-assigned override code follow the steps outlined below . It is advised you read both sections under the headings “Programmi.
4 . Within 10 seconds turn the ignition switch off, on, off, on, off, on. (The siren or horn will beep and the lights will flash one time.) 5 . Within 10 seconds, begin to press and release the push button switch to set the tenths digit. (As per the example, press and release 5 times to set the tenths digit to 5) 6 .
ELIMINATING THE ARM / DISARM CHIRPS : The normal arming and disarming confirmation chirps can easily be turned off using the valet pushbutton switch. To do this; 1. Turn the ignition key on, and then off. 2. Within 10 seconds of turning the ignition key off, press and release the valet switch 3 times.
PRO 9232 SYSTEM FUNCTIONS A T A GLANCE PASSIVE ARMING ARMED DISARMED VALET MODE INTRUSION ZONE 3 INTRUSION ZONE 2 INTRUSION ZONE 1 ARM DISARM ARM / DOOR OPEN 10 MIN. PASSIVE ARM / DOOR OPEN DISARM / INTRUSION DISARM / AFTER 10 MIN. PASSIVE ARM DISARM / AFTER 10 MIN.
An important point after buying a device Audiovox PRO9232 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO9232 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO9232 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO9232 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO9232 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO9232, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO9232.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO9232. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO9232 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
