Instruction/ maintenance manual of the product PRO-9776 Audiovox
Go to page of 12
128-7856 1 of 12 Page 1 4 Button Remote Start Security System With Plug-In Shock Sensor & Starter Disable FEA TURES: 2 Four Button Programmable RF Transmitters Seven Channel Code Learning .
128-7856 2 of 12 Page 2 Y our Remote S tart Alarm System has many features and available options some of which are selected at time of installation. For your reference, the list on page 9 of this manual shows what features and options have been installed.
128-7856 3 of 12 Page 3 ARMING THE SYSTEM - P ASSIVE (AUTOMA TIC) If the passive arming feature has been selected: 1. Turn the engine off, exit the vehicle, and close all doors, hood and trunk. The dash mounted LED will begin to flash rapidly indicating that the 30 second passive arming timer has begun.
128-7856 4 of 12 Page 4 NOTE: If the optional 2 step door unlock circuit is installed, when the unlock transmitter button is activated, the drivers door only will unlock, pressing the unlock button a second time will cause all doors to unlock.
128-7856 5 of 12 Page 5 door locks will remain operational. T o use the valet mode, the system must first be disarmed either by using your keychain transmitter , or by activating your personalized manual override code. 1 . Enter the vehicle, and turn the ignition key to the on position.
128-7856 6 of 12 Page 6 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code. Custom Code Programming Example: T o Change the code from the factory pre-assigned code of 1 1 to “52” you would do the following: 1 .
128-7856 7 of 12 Page 7 NOTE: If the vehicle battery is disconnected then reconnected, the unit will return to the default setting of chirps on. Repeat the above procedure to eliminate the arm/disarm chirps.
128-7856 8 of 12 Page 8 The parking lights will flash two times indicating the mode was successfully entered. If your parking lights flashed four times, this indicates the turbo mode was on and is now turned off.
128-7856 9 of 12 Page 9 TO BEGIN THE AUTOMA TIC ST ART UP TIMER 1. Turn the ignition key on then off. 2. Within 10 seconds, activate the RF start command two times. (Push the trunk/key button of your keychain transmitter 4 times). The parking lights will flash and the siren will chirp 4 times indicating the timed start mode is activated.
128-7856 10 of 12 Page 10 ADDITIONAL REMOTE FUNCTION (CHANNEL 5) This system has an additional feature that can be connected to a number of different optional accessories.
128-7856 11 of 12 Page 11.
128-7856 12 of 12 Page 12 ALARM DASH LED INDICA TORS RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = ARMED OFF = DISARMED ON SOLID = V ALET MODE 3 FLASH.
An important point after buying a device Audiovox PRO-9776 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO-9776 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO-9776 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO-9776 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO-9776 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO-9776, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO-9776.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO-9776. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO-9776 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
