Instruction/ maintenance manual of the product PRO-9744WOS2 Audiovox
Go to page of 8
Important! The PRO-9744 alarm system is configurated for many different user preferences. Please read this entire manual to fully understand the operation of your specific unit's installation.
TRANSMITTER ICONS (Symbols): The PRO-9744's 4 button transmitter has a replaceable membrane (button pad) that uses icons to denote operation of your security system. The icons used are a standard in use by the automotive industry . Their functions are described below .
YOUR ANTI - CODE GRABBING TRANSMITTER: The four button transmitter included with your security system employs one of the most secure means of radio frequency transmission available in today's automotive s e - curity systems. Some of the more sophisticated thieves use what is known as a code grabber .
ARMING THE SYSTEM , Active: T urn the engine off, exit the vehicle and close all doors, hood, and trunk. Press and release the transmitter button with the lock icon on it. The parking lights will flash once, the Horn or Siren will beep or chirp once, and the dash mounted LED will begin to flash slowly indicating that the system is armed.
light will also flash during the triggered mode. A trigger mode will continue for 30 seconds, the alarm will reset, and continue to monitor your vehicle.
W arning Signals" shown later in this manual. If upon disarm, the Horn or Siren did not beep or chirp two times, refer to the section entitled "Eliminating The Arm/Disarm Beeps or Chirps". INTRUSION W ARNING SIGNALS: The system will warn you if an intrusion attempt has been made in your absence.
-7- ELIMINA TING THE NORMAL ARM/DISARM BEEPS OR CHIRPS: Y ou can selectively eliminate the normal arm and disarm beeps or chirps by holding the lock or unlock button slightly longer when arming and disarming. This will prevent the Horn or Siren beeps or chirps for one arm or disarm cycle.
ST ANDARD TRANSMITTER OPTIONS: REMOTE TRUNK RELEASE BUTTON: The remote trunk release option, if installed in your vehicle can be programmed to operate either with a single push of the transmitter button for 2 seconds, or a double push of the transmitter button.
An important point after buying a device Audiovox PRO-9744WOS2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO-9744WOS2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO-9744WOS2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO-9744WOS2 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO-9744WOS2 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO-9744WOS2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO-9744WOS2.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO-9744WOS2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO-9744WOS2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
