Instruction/ maintenance manual of the product PRO-9744 Audiovox
Go to page of 14
Multi Function, User Configurable Remote V ehicle Security System with 4 Button Replaceable Membrane Remote T ransmitter This System Allows The T ransmitter Buttons T o Be Configured For A Particular V ehicle, Dealer , Or Consumer Based On Operational Preferences Or Requirements.
1 PRO-9744 The PRO-9744 Remote Control Security System has been designed as a complet ely config urable system that will meet the needs of any consumer . In addition to the many programmable features of the unit, the system offers a transmitter membrane button replacement program.
WIRING THE CONTROL MODULE: 8 PIN MAIN WIRING HARNESS: RED w/ WHITE T race Wire: + 12 V olts Battery Source The Red w/ White trace wire is the main 12 volt supply for the control module. Connect the RED wire with the 5 Amp fuse to a constant + 12 volt battery source.
This circuit is designed for a pulsed 15 Amp maximum current rating. Connect the Red wire with the 15 Amp fuse to a constant + 12 volt supply . If it becomes necessary to replace the fuse in this wire, a fuse rated for 15 Amps maximum is to be used.
WHITE w/ BLUE T race W ire: Low Current (-) Ground Headlight Output The White w/ Blue Trace wire is provided to operate the optional headlamp illumination feature of the system. This is a low current (300 mA) output and must be connected to an external relay to control the high current switching circuit of the vehicle's headlamps.
T ypical 5 Wire 2 Step Unlock/Lock Wiring Diagram 2 Pin Door Lock & 2nd Unlock Harness: (White Connector) The Red & Green Door Lock & 2nd Unlock output wires provide either a pulsed ground or pulsed + 12 volts to control the vehicle door locks & 2nd unlock circuits.
T ypical 5 Wire Door Lock/Unlock T ypical 3 Wire Ground Lock/ 2 Step Unlock Wiring Diagram 6.
T ypical 3 Wire + 12 V olt Lock/ 2 Step Unlock Wiring Diagram T ypical 3 Wire Ground Switched Door Lock/Unlock 7.
T ypical 3 Wire + 12 V olt Switched Door Lock/Unlock PROGRAMMING THE PRO-9744: The PRO-9744 has two program modes. One that will allow the transmitter to be configured to accommodate a particular vehicle, consumer , or dealer , based on their preference.
Receiver Channel # & Function Channel 1 = Lock & Arm Channel 2 = Unlock & Disarm Channel 3 = module's output Dark Blue wire (T runk Release) can be programmed for 1 second pulse or output as long as TX. button is pressed. Channel 4 = R.
FEA TURE: 1 2 3 4 5 6 7 8 9 10 11 12 DESCRIPTION: Headlights turn on for 20 seconds when Dis- arming. Headlights turn on for 20 seconds when Arming Ignition Lock Select Ignition Unlock Select Ignition Unlock Dr . Door or All Doors Active or Passive Arming Active or Passive Door Locks Channel 3 Output select pulsed or as long as tx.
or , Flip the valet switch on then off to move to feature #4. The LED will flash 4x pause, 4x pause... Press the arm transmitter button one time to change this feature or , Flip the valet switch on then off to move to feature #5. The LED will flash 5x pause, 5x pause.
12 ORANGE BLUE.
128-5039A 13.
An important point after buying a device Audiovox PRO-9744 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO-9744 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO-9744 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO-9744 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO-9744 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO-9744, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO-9744.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO-9744. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO-9744 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
