Instruction/ maintenance manual of the product PRO-9675FT4 Audiovox
Go to page of 10
FEA TURES : w 2 Four Button Programmable RF Transmitters w Four Channel Code Learning Receiver (capable of accepting 4 transmitters ) w Anti Code Grabbing T echnology w Selectable Manual Override Mode.
Page 2 Y our Remote Start Alarm System has many features and available options some of which are selected at time of installation. For your reference, the list on page 9 of this manual shows what features and options have been installed. Consult your installing dealer for options that may have been installed and are not listed.
opened during the 30 second arming cycle, arming will be suspended. When all entry points are closed, the arming cycle will begin again. At the end of the 30 seconds, the parking lights will flash once, the siren will chirp once, and the dash mounted LED will begin to flash slowly confirming the system is armed.
Page 4 SILENT DISARMING: 1. As you approach the vehicle, press and hold the Unlock button of your key chain transmitter for two seconds. The parking lights will flash twice, and the dash mounted LED will turn off confirming that the system is disarmed.
Page 5 3. T o return to normal operation, press and release the pushbutton switch any time the ignition is on. NOTE : Always remember to return the vehicle to the valet off position.
Page 6 Custom Code Programming Example: T o Change the code from the factory pre-assigned code of 1 1 to “52” you would do the following: 1 . Disarm the system by use of the transmitter, or by use of the emergency override sequence. 2 . Turn the ignition switch to the on position.
Page 7 defective zone indicator will always operate. Since these are important warnings to you that something has happened, they cannot be eliminated. REMOTE P ANIC OPERA TION The Lock or Unlock button on your keychain transmitter also functions as a panic switch for use in emergency situations.
programming set up by your installation center . When you arrive at your vehicle, disarm the alarm system by pressing and releasing the unlock/disarm button of your keychain transmitter . Enter the vehicle and turn the ignition key to the on position.
OPTIONAL DEVICE OUTPUT ( CHANNEL 3 ) Controlled By: o Option Button, o trunk/key button, o Both Option & Lock Button, or o Both Option and Unlock Button. This security system is equipped with an output which will activate when the appropriate transmitter button is depressed for 4 seconds.
ALARM DASH LED INDICA TORS RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = A RME D OFF = DISARMED ON SOLID = V A LET MOD E 3 FLASH... P AUSE = I NTRUSION ZONE 3 2 FLASH.
An important point after buying a device Audiovox PRO-9675FT4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO-9675FT4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO-9675FT4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO-9675FT4 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO-9675FT4 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO-9675FT4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO-9675FT4.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO-9675FT4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO-9675FT4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
