Instruction/ maintenance manual of the product PRO-9649a Audiovox
Go to page of 10
128-6615 1 of 10 Model PRO-9649a Installation Manual SELECT ABLE FEA TURES Note: The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
128-6615 2 of 10 Page 2 Fourth Press and release the valet switch 3 chirps = headlight output when arming and disarming Press transmitter Lock button to change 4 chirps = headlight output off Press tr.
128-6615 3 of 10 Page 3 If during the program sequence receiver channel 1 is programmed, and received channel 2 is skipped over , as indicated in the transmitted program guide, then the unit will operate as a single button lock/unlock unit from that transmitter .
128-6615 4 of 10 Page 4 Whichever mounting method is selected, make certain that the sensitivity adjustment is accessible for use later in the installation.
128-6615 5 of 10 Page 5 Orange Wire: 300 mA Ground Output When Armed - N. C. Starter Disable This wire is provided to control the starter cut relay . Connect the orange wire to terminal 86 of the relay .
128-6615 6 of 10 Page 6 Note: This is a normally opened starter cut arrangement, and when power is removed from the security system, the starter disable feature will remain operational, and the vehicle will not start. Audiovox does not recommend using the Orange w/ White trace wire to interrupt anything but the starting circuit of the vehicle.
128-6615 7 of 10 Page 7 2 Pin White Connector: Dash Mounted LED Route the red and blue wires in the 2 pin white connector from the LED to the control module, and plug it into the mating white connector on the side of the module.
128-6615 8 of 10 Page 8 Next, locate the drivers door unlock motor wire and cut it at a convenient location to allow wiring of the White and Dark Blue wires. Dark Blue will connect to the vehicle side of the cut wire and White will connect to the "Unlock Drivers Door Motor" side of the cut wire.
128-6615 9 of 10 Page 9 COMPLETING THE INST ALLA TION NOTE: This unit has the ability to learn the dome light delay time, up to 60 seconds. If the vehicle has delay interior lights, and you wish to avoid three chirp, defect zone, indication normally associated with this type of interior light, we suggest you learn the interior light delay .
128-6615 10 of 10 © 2003 Audiovox Electronic Corporation, 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-6615.
An important point after buying a device Audiovox PRO-9649a (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO-9649a yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO-9649a - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO-9649a you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO-9649a will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO-9649a, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO-9649a.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO-9649a. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO-9649a along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
