Instruction/ maintenance manual of the product PRO-9600 Audiovox
Go to page of 12
PRO-9600 Installation Guide Remote Control Security System With Pager/Satellite Control Interface Installation Instructions Kit Contents PRO-9600 Control Module 4 Channel Code Learning Receiver 2 Thre.
The PRO-9600 is a full featured security system with on board paging technology that provides the consumer a direct link to their vehicle from anywhere in the world. This patent pending technology allows the user to operate the vehicle from any land or mobile telephone.
VALET/PROGRAM SWITCH: Select a mounting location that is easily accessible to the operator of the vehicle. The switch can be mounted to the lower dash panel in the driver's area.
White w/ Black T race W ire: Positive (+) Siren Output This is the positive siren feed wire. Route this wire through a grommet in the firewall to the siren location. Connect the White w/ Black T race wire to the Red wire of the Siren. Secure the Black wire of the Siren to a known chassis ground or solid clean metal surface.
Dark Green Wire: (-) Instant T rigger Zone 2 The Dark Green wire is the instant on ground trigger input wire. This wire must be connected to the hood and trunk pin switches previously installed. Note: This wire will be shunted when remote control channel 2 is accessed, (trunk release).
2 Pin Auxiliary Harness: (Red Connector) The two pin auxiliary connector is used to control vehicle shut down from a paging theft command. See supplement for wiring information.
LED Flash Pattern 1 Flash Pause etc. 2 Falsh Pause etc. 3 Flash Pause etc. 4 Flash Pause etc. 5 Flash Pause etc. 6 Flash Pause ect. ALARM SELECT ABLE FEA TURES RF Programmable Features: Feature Selection 1 Chirp 2 Chirp Default First 1 Second Door Locks 3.
8.
VEHICLE YEAR VEHICLE MFG. VEHICLE MOD. VEHICLE COLOR LICENSE PLA TE# VIN# CHANNEL 2 AUXILIARY OUTPUT 1 I S CONNECTED TO CHANNEL 3 AUXILIARY OUTPUT 2 I S CONNECTED TO CHANNEL 4 AUXILIARY OUTPUT 3 I S C.
10 PRO-9600 MODULE.
11 PRO-9600.
VSS WIRING SUPPLEMENT The two pin auxiliary harness with the red connector shell provides a input signal to the control module from the vehicle's S peed Sensor ( VSS), and provides a low current ground switched output to control a shut down relay .
An important point after buying a device Audiovox PRO-9600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO-9600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO-9600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO-9600 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO-9600 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO-9600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO-9600.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO-9600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO-9600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
