Instruction/ maintenance manual of the product PRO-94FR Audiovox
Go to page of 6
Model PRO-94FR Owner's Manual ~ .-=0- ~ / .-=0- .:?" Transmitter Programming Guide Transmitter Button Functions The transmitters included in the security system kit are pre-programmed at the factory, with button # 1 assigned to channel one only.
These factory programmed settings can be prioritized based on an individual's frequency of use. (i.e. pressing both buttons simultaneously to activate channel 1. arm/disarm etc.) by following the normal programming instructions below. Please note when changing the button sequences of the factory settings, it is necessary to perform steps 5.
6. Move the valet/bypass switch on, then off again. 7. The dash mounted L. E. D. will flash 2 times, and the siren will "chirp" one time, indicating that the system is ready to accept programming for channel 2, or the pulsed ground output for remote trunk release, remote car starter, etc.
BATTERY REPLACEMENT: The transmitter incorporates a small red L.E.D. built into the case. This L.E.D. can be used to indicate battery condition. You will notice a decrease in transmitter range as the battery conditfon deteriorates. To replace the battery.
ORDERING ADDITIONAL or REPLACEMENT TRANSMITTERS: Order Form for Additional 2 Button Transmitters Model: PRO-94FR IMPORT ANT: Read instructions below and legibly print all required infor mation. 1. Fill in the following information NAME ADDRESS ZIP CODE CITY STATE WHERE PURCHASED DATE PURCHASED 2.
L 128-5491 6 of 6.
An important point after buying a device Audiovox PRO-94FR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO-94FR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO-94FR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO-94FR you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO-94FR will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO-94FR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO-94FR.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO-94FR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO-94FR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
