Instruction/ maintenance manual of the product 460Pn Samsung
Go to page of 154
Install Pro g rams SyncMaster 460Pn/460P .
Notational Failure t o follow di rections not ed by this symb ol could resu lt in bodily harm or dama ge to equipment. Prohibited Importan t to read and un derstand at all times Do not disassembl e Di.
z This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. z This may cause an electric shock or fire. Use only a properly grounde d plug and receptacle. z An improper grou nd may cause elec tric shock or equip ment damage .
z This may cause damage to the product or huma n body. Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf. z Dropping the pro duct may cause damage to the pro duct or personal in jury.
Installing a wall bracket must be done by a qualified professional. z Installation by unqual ified personnel may result in in jury. z Always us e the mounti ng device spec ified in the ow ner's manual. When installing the product, make sure to k eep it away from the wall (more than 10cm/4inch ) for ventilation purposes.
Contact the Service C enter or Customer Center for interior cleaning once a year. z Keep the pr oduct's i nterior clean . Dust whic h has accumula ted in the in terior over an extende d period of time may c ause malfunction or fire. Others Do not remove cover (or back ).
Do not cover the vents on the monitor cabinet. z Bad ventilatio n may cause a breakdown or fire. Do not place water contai ners, chemical products or small metal objects on the monitor. z This may cau se malfunctio n, an electr ic shock or fire. z If a foreign subs tance enters the mo nitor, unplug the power cord and contact the Service Center .
Do not install the product on an unsta ble, uneven surfac e or a location prone to vibrations. z Dropping the pro duct may cause dama ge to the product or personal injury. Using the prod uct in a locat ion prone to vib rations may shorten the lifeti me of the product or ma y catch fire.
public recycl ing center or to a store sell ing the same ty pe of the batt ery or recharge able batter y..
Please make sure the following ite ms are included with your monitor. If any item s are missing, contact your dealer . Contact a local deale r to bu y o p tional items.
D-Sub Cable Power Cord S p eaker Wire Cabl e Sold se p aratel y Wall Mount KIT S p eaker Set Stand KIT DVI Cable LAN Cable Others Remote Control Batteries ( AAA X 2 ) Cove r -Hole BNC to RCA Ada p ter.
Front 1. MENU 6. PIP 2. Navigate button (Up-Down button) 7. Power button 3. Adjust button (Left-Right button)/ Volume button 8. Power indicator 4. ENTER 9. Remote Control Sensor 5. SOURCE 1. MENU Use this button to open the on -screen menu and exit from the me nu screen or close scree n adjustment m enu.
for long perio ds. Rear For detailed in formation concer ning cable connection s, refer to Connecting Ca bles under Setup. The monitor's re ar configuration m ay vary slightly de pending on t he monitor model. 1. POWER SW : Switch the monito r on and off.
7. COMPONENT AUDIO IN [L-AUDIO-R](C omponent Audio Connection Terminal (Input)) 8. BNC/COMPONENT OUT (BNC/Component Connection Terminal (Output)) - BNC (Analog PC ) Connection : conn ecting R, G, B, H, V port - Componen t Connection : connectin g P R , Y, P B port 9.
17. LAN (LAN Connection Terminal) (MS Internet E xplorer) 18. USB (USB Connection Terminal) (Keyboar d / Mouse, Ma ss Storage Dev ice Compat ible.) 19. DIGITAL AUDIO OUT (Digital Audio Connection Terminal) 20. Kensington Lock The Kensingt on lock is a device used to physical ly fix the syst em when using it in a public place.
1. ON / OFF 2. MAGICNET 3. MDC 4. LOCK 5. MagicNet buttons 6. +100 7. VOL 8. MUTE 9. AUTO 10. MENU 11. ENTER 12. PRE-CH 13. CH/PAGE 14. SOURCE 15. INFO 16. EXIT 17. Up-Down Left-Right buttons 18. P.MODE (M/B) 19. STILL 20. BBE 21. MTS 22. PIP 23. SOURCE 24.
- This fuction does not work for this monitor. 7. VOL Adjusts the audio volu me. >>Click here to see an animat ion clip 8. MUTE Pauses (mutes) the audio output temporarily. Displayed on the lower left corn er of the screen. The audio res umes if MUTE o r - VOL + is presse d in the Mute mo de.
21. MTS You can select the MTS (Multichannel Television Stere o) mode. - This fuction does not work for this monitor. Audio Type MTS/S_Mode Default FM Stereo Mono Mono Manual Ch ange Stereo Mono Stereo SAP Mono SA P Mono 22. PIP Every time yo u push the butt on, a PIP screen appears.
Remote Control PHOTO z When the files are selected in the library list Previous file Stop slideshow / View the bottom menu bar Slideshow Next file z When you see no menu in a zoomed-in picture Move up.
Move to the previous page (when the curso r is placed at the bottom, it will move to the first fil e of the next pag e) Move to the next page (when th e current page is the f irst, it will move to the.
Move to the pr evious page (w hen the current page is the last, it will move to the first page) File view on the cursor position z PDF Move to the t op Move to th e bottom Move to the n ext page Move .
Move to the n ext page Move to the pr evious page Slideshow Exit Power point z Power point Slideshow Stop slideshow Move to th e top Move to th e bottom Move to the n ext page Move to the pr evious pa.
Click when the cursor is placed over a link (mov e to the link) Exit the Internet.
Please make sure the following ite ms are included with your monitor. If any item s are missing, contact your dealer . Contact a local deale r to bu y o p tional items.
D-Sub Cable Power Cord S p eaker Wire Cabl e Sold se p aratel y Wall Mount KIT S p eaker Set Stand KIT DVI Cable Others Remote Control Batteries ( AAA X 2 ) Cove r -Hole BNC to RCA Ada p ter Jack Semi.
Front 1. MENU 6. PIP 2. Navigate button (Up-Down button) 7. Power button 3. Adjust button (Left-Right button)/ Volume button 8. Power indicator 4. ENTER 9. Remote Control Sensor 5. SOURCE 1. MENU Use this button to open the on -screen menu and exit from the me nu screen or close scree n adjustment m enu.
for long perio ds. Rear For detailed in formation concer ning cable connection s, refer to Connecting Ca bles under Setup. The monitor's re ar configuration m ay vary slightly de pending on t he monitor model. 1. POWER SW : Switch the monito r on and off.
7. COMPONENT AUDIO IN [L-AUDIO-R](C omponent Audio Connection Terminal (Input)) 8. BNC/COMPONENT OUT (BNC/Component Connection Terminal (Output)) - BNC (Analog PC ) Connection : conn ecting R, G, B, H, V port - Componen t Connection : connectin g P R , Y, P B port 9.
See Connecting t he Monito r for further inform ation regarding c able connectio ns. Remote Control The performance of the remote cont rol may be affected by a TV or other electronic devices operated near the monitor, causin g malfunction due to interference with fre q uenc y .
2. MAGICNET MagicNet Quick L aunch Button. - This fuction does not work for this monitor. 3. MDC MDC Quick Lau nch Button. 4. LOCK This button will activate or deactivate all function keys on both the remote con trol and the monitor except for the Powe r and LOCK butto ns.
17. Up-Down Left-Right buttons Moves from o ne menu item to another horizo ntally, verti cally or adj usts selected me nu values. 18. P.MODE (M/B) When you press th is button, current picture mo de is displayed on the lower center o f the screen. AV / S-Video / Component : P.
Mechanical Lay -out | Monitor Head | Stand | Sp eaker | Installation VESA Bracket | Wall Bracket Installa tion 1. Mechani cal Lay-o ut 2. Monitor Head.
3. Stand 4. Speaker 5. Installation VESA Bracket z When installing VESA, make su re to comply with the in ternational VESA standards. z Purchasing VE SA Bracket and I nstallation Informat ion : Please cont act your nearest Sa msung Distribu tor to place an order.
For securing the br acket on a wall, use onl y machine screws of 6 mm di ameter and 8 to 12 mm length. 6. Wall Bracket Installation z Contact a t echnician fo r installing the wall brac ket. z Samsung Electron ics is not responsi ble for any dama ges to the pro duct or harm to cust omers when the installation i s done by the cu stomer.
There are t wo hinges(l eft and right ). Use the corre ct one. Before drilling into the w all, check if the length between th e two lockin g holes at the ba ck of the product is correct. If the length is too sho rt or long, loosen all or some of the 4screw s on the wall bra cket to adjust the length.
Remove the 4 screw s on the back of the product. Insert the screw B into the plastic han ger. 1. Mount th e product on t he wall brac ket and make sure it is prope rly fixed to the left and right plastic hang ers. 2. Be caref ul when inst alling the produ ct on the bracket as fingers can be caught in the hol es.
1. Fix the produ ct to the wall bracket. 2. Hold the product at the top in the center an d pull it forward (direc tion of the arr ow) to adj ust the angl e. 3. You can a djust the bracket angle b etween -2°and 15 °. Make sure to use the top center, and not th e leftor the righ t side of the pro duct to adjust t he angle.
Installin g Stand Kit Only the su pplied bol ts should be used. Samsung Electron ics will not be respo nsible for damage s caused b y using a base oth er than those specified. 1. Installin g the Semi Stand Left stand Ri g ht stand Make sure to install the stand with Caution la bel folded ba ckward.
2. Set up the left and ri ght stands respectivel y. 3. Put th e stand into the ho le at the botto m of the monitor. Insert screw into the hole indicated and tighten. (M4 × L15) This stan d is originall y designed for t he adjustme nt of the screen an gle.
Adjustin g Your Moni tor. Connecti ng to a Com puter | Connec ting to a V CR | Connecting to a DVD Playe r | Connecti ng a Camco rder Connecti ng DTV Set Top Bo x | Connecting Speakers | Connec ting to an Audio System Connecting the LAN Cable | Connecting USB | Conn ecting t he Digital A udio Syste m 1.
3. Conne ct the audio ca ble for your moni tor to the audi o port on the ba ck of your com puter. 4. Turn o n both your com puter and the mon itor. DVI cable or BNC cable is opti onal. Contact a local Sam sung Electronics Service Center to buy optional items.
1. Conne ct a set of audio cabl es between the COMPONENT AUDIO IN [L-AUDIO-R] on the Monitor and the AUDIO OUT jacks on the DVD player. 2. Conne ct a Component ca ble between the BNC/COMPONENT IN - P R , Y, P B port on the Moni tor and the P R , Y, P B jacks on the DVD play er.
5. Connecting DTV Set Top Box The connecti ons for a typical Se t Top Box are sh own below. 1. Connect a se t of audio cabl es between the COMPONENT AUDIO IN [L-AUDIO -R] on the Monitor and the AUDIO OUT jacks on the Set Top Box.
1. Connect a se t of audio cables b etween the AUX L , R jacks on the A UDIO SYSTEM and the MONITOR OUT [L-AUDIO-R] on the Monitor. 8. Connecting the LAN Cable 1. Connec t the LAN cab le. 9. Connecting USB 1. You can c onnect to USB de vices such as a mouse or keyboa rd.
1. Connect a set of digit al audio cabl es betwe en the Digit al Audio In put jacks on th e DIGTAL AUDIO SYSTEM an d the DIGITAL AUDIO OUT on the Monitor. 1. Introduction 2. Beginning : Main Screen | Port Setting | 3. Power Control 4. Input Source Control 5.
A Multiple Display Contro l (MDC) is an appl ication all owing various di splays to be easi ly and simulta neously operated on a PC. RS-232C, a standard of ser ial communica tion, is use d for the commun ication bet ween a PC and a displ ay.
Main Icons Select Button Remocon Info Grid Safety Lock Display Selection Port Selectio n Control Tools 1. Use the main icons to swit ch into each screen. 2. Allows you to enable or d isable the remote contro l signal receivin g function of the d isplay unit.
1. Multiple Displa y Control is original ly set to COM1 . 2. If any port other than C OM1 is used, COM1 to COM4 can b e selected in P ort Selection Menu. 3. If the exact port name whi ch is connecte d to the monitor using a serial cabl e is not selected, communicatio n will not be unavailable.
Power Contro l allows contro lling some of the function s of the selec ted display. 1) Power On/Off - Turns the po wer of the sel ected displ ay On/Off. 2) Volume Contro l - Controls the v olume level of th e selected display. It receives the volu me value of the selected disp la y from the sets a nd displays it in the slider.
3) DVI - Changes the I nput Source of the sel ected display to DVI. 4) AV - Changes the I nput Source of th e selected display to AV. 5) S-Video - Changes the I nput Source of th e selected display to S-Video. 6) Comp onent - Changes the I nput Source of the sel ected display to Component.
Info Grid show s some basic info rmation necess ary to Image Si ze Control. 1) Click the AV, S-Vide o, Component tab to adj ust Image Size for AV, S-Video, Component. Click Select All or use Ch eck Box to select a displa y to control. 2) Info Grid displays on ly the display ha ving AV, S-Video, Compon ent or DV I(HDCP) as input source.
The Input source of MagicNet works only on Magi cNet model. 7. PIP Control - PIP Size 1. Click PIP of the mai n icons and the PI P control scree n appears. Click Select A ll or use Check Box to select a display to control. Info Grid shows some basic informa t ion necessary to PIP Si ze Control.
Info Grid show s some basic info rmation necess ary to PIP Source C ontrol. 1) PIP Source - PIP Sour ce can be contro lled with turn ing on the moni tor power. 2) PC - Changes the source o f the PIP of the sele cted display to PC. 3) BNC - Changes the source o f the PIP of the sele cted display to BNC.
Info Grid shows some basic in formation necessary to Settings Control. When each functi on is selected, the set value of t he selected fu nction is displaye d in the slide. When Select All is sele cted, the default value (50) retu rns. Changing a value in this scre en will au tomatically change the mode to "CU STOM.
Info Grid shows some basic in formation necessary to Se ttings Control. Whe n each function is selected, the set value of the selected functi on is displayed in the slide. When Select All is sele cted, the default value (50) retu rns. Changing a va lue in this scre en will au tomatically change the mode to "CU STOM.
When Select All is sele cted, the default value (50) retu rns. Changing a value in this scre en will au tomatically change the mode to "CU STOM." 1) Audio - Controls audio s ettings for all input sources. 2) Bass - Adjusts Bass of the sel ected displa y.
An "Info Grid" showin g several basic data items ap pears. 1) Maint enance - Allows Maintena nce Control for all input sources. 2) Auto Lamp Control - Automatically adj usts the backligh t of the sele cted display at a specified time . The Auto Lamp Control automatically turn s off if you adjust using the Manua l Lamp Control.
1. Click on the "Mainten ance" icon in the Main Icon c olumn to disp lay the Maintena nce screen. 1) Video Wa ll - A V i d eo W a ll is a set o f v i d e o s c re en s t h at a r e c o n ne c t ed t o g e t h e r , so t h at e a ch s c r e en s h o w s a p a rt of the whole picture or so that the s ame pictur e is repeated on each screen.
The Maintenance Control f unction is available only for the displa ys where the power status is ON. The Input source of MagicNet works only on Magi cNet model. 12. Troubleshooting 1. The disp lay you wish to cont rol does not a ppear on the Powe r Control Info Grid - Check the conn ection of RS23 2C.
One of the re cent problems in using a compute r is that the color o f the images pri nted out by a prin ter or other imag es scanned by a sc anner or a digita l camera are not the same as those shown o n the monitor. The Natural Color S/ W is the very solutio n for this problem.
Installation 1. Insert the installation CD into the CD-ROM drive. 2. Click the MagicNet installati on file. 3. When the InstallShield Wizard wi ndow appears, click "Next." 4. Select "I agree to the terms of the license agree ment" to accept the terms of use.
6. Choose a folder to install the MagicNet program. 7. Click "Install." 8. The "Installation Status" windo w appears..
9. It is recommended restarting the system for the normal opera tion of the MagicNet Server program. Click "Finish. " 10. When the installation is complete, the MagicN et executable icon appears on your deskto p. 11. Do uble-clic k the icon to start the progr am.
Installin g Stand Kit Only the su pplied bol ts should be used. Samsung Electron ics will not be respo nsible for damage s caused b y using a base oth er than those specified. 1. Installin g the Semi Stand Left stand Ri g ht stand Make sure to install the stand with Caution la bel folded ba ckward.
2. Set up the left and ri ght stands respectivel y. 3. Put th e stand into the ho le at the botto m of the monitor. Insert screw into the hole indicated and tighten. (M4 × L15) This stan d is originall y designed for t he adjustme nt of the screen an gle.
Connecti ng to a Com puter | Connec ting to a V CR | Connecting to a DVD Playe r | Connecti ng a Camco rder Connecti ng DTV Set Top Bo x | Connecting Speakers | Connec ting to an Audio System 1. Connecting to a Computer 1. Connect the power cord for your monitor t o the power port on t he back of the monitor.
3. Conne ct the audio ca ble for your moni tor to the audi o port on the ba ck of your com puter. 4. Turn o n both your com puter and the mon itor. DVI cable or BNC cable is opti onal. Contact a local Sam sung Electronics Service Center to buy optional items.
1. Conne ct a set of audio cabl es between the COMPONENT AUDIO IN [L-AUDIO-R] on the Monitor and the AUDIO OUT jacks on the DVD player. 2. Conne ct a Component ca ble between the BNC/COMPONENT IN - P R , Y, P B port on the Moni tor and the P R , Y, P B jacks on the DVD play er.
5. Connecting DTV Set Top Box The connecti ons for a typical Se t Top Box are sh own below. 1. Connect a se t of audio cabl es between the COMPONENT AUDIO IN [L-AUDIO -R] on the Monitor and the AUDIO OUT jacks on the Set Top Box.
1. Connect a se t of audio cables b etween the AUX L , R jacks on the A UDIO SYSTEM and the MONITOR OUT [L-AUDIO-R] on the Monitor. 1. Introduction 2. Beginning : Main Screen | Port Setting | 3. Power Control 4. Input Source Control 5. Imag e Size Contro l : PC, BNC, DVI | AV, S-Video, Component, DVI(HDCP) 6.
A Multiple Display Contro l (MDC) is an appl ication all owing various di splays to be easi ly and simulta neously operated on a PC. RS-232C, a standard of ser ial communica tion, is use d for the commun ication bet ween a PC and a displ ay.
Main Icons Select Button Remocon Info Grid Safety Lock Display Selection Port Selectio n Control Tools 1. Use the main icons to swit ch into each screen. 2. Allows you to enable or d isable the remote contro l signal receivin g function of the d isplay unit.
1. Multiple Displa y Control is original ly set to COM1 . 2. If any port other than C OM1 is used, COM1 to COM4 can b e selected in P ort Selection Menu. 3. If the exact port name whi ch is connecte d to the monitor using a serial cabl e is not selected, communicatio n will not be unavailable.
Power Contro l allows contro lling some of the function s of the selec ted display. 1) Power On/Off - Turns the po wer of the sel ected displ ay On/Off. 2) Volume Contro l - Controls the v olume level of th e selected display. It receives the volu me value of the selected disp la y from the sets a nd displays it in the slider.
3) DVI - Changes the I nput Source of the sel ected display to DVI. 4) AV - Changes the I nput Source of th e selected display to AV. 5) S-Video - Changes the I nput Source of th e selected display to S-Video. 6) Comp onent - Changes the I nput Source of the sel ected display to Component.
Info Grid show s some basic info rmation necess ary to Image Si ze Control. 1) Click the AV, S-Vide o, Component tab to adj ust Image Size for AV, S-Video, Component. Click Select All or use Ch eck Box to select a displa y to control. 2) Info Grid displays on ly the display ha ving AV, S-Video, Compon ent or DV I(HDCP) as input source.
The Input source of MagicNet works only on Magi cNet model. 7. PIP Control - PIP Size 1. Click PIP of the mai n icons and the PI P control scree n appears. Click Select A ll or use Check Box to select a display to control. Info Grid shows some basic informa t ion necessary to PIP Si ze Control.
Info Grid show s some basic info rmation necess ary to PIP Source C ontrol. 1) PIP Source - PIP Sour ce can be contro lled with turn ing on the moni tor power. 2) PC - Changes the source o f the PIP of the sele cted display to PC. 3) BNC - Changes the source o f the PIP of the sele cted display to BNC.
Info Grid shows some basic in formation necessary to Settings Control. When each functi on is selected, the set value of t he selected fu nction is displaye d in the slide. When Select All is sele cted, the default value (50) retu rns. Changing a value in this scre en will au tomatically change the mode to "CU STOM.
Info Grid shows some basic in formation necessary to Se ttings Control. Whe n each function is selected, the set value of the selected functi on is displayed in the slide. When Select All is sele cted, the default value (50) retu rns. Changing a va lue in this scre en will au tomatically change the mode to "CU STOM.
When Select All is sele cted, the default value (50) retu rns. Changing a value in this scre en will au tomatically change the mode to "CU STOM." 1) Audio - Controls audio s ettings for all input sources. 2) Bass - Adjusts Bass of the sel ected displa y.
An "Info Grid" showin g several basic data items ap pears. 1) Maint enance - Allows Maintena nce Control for all input sources. 2) Auto Lamp Control - Automatically adj usts the backligh t of the sele cted display at a specified time . The Auto Lamp Control automatically turn s off if you adjust using the Manua l Lamp Control.
1. Click on the "Mainten ance" icon in the Main Icon c olumn to disp lay the Maintena nce screen. 1) Video Wa ll - A V i d eo W a ll is a set o f v i d e o s c re en s t h at a r e c o n ne c t ed t o g e t h e r , so t h at e a ch s c r e en s h o w s a p a rt of the whole picture or so that the s ame pictur e is repeated on each screen.
The Maintenance Control f unction is available only for the displa ys where the power status is ON. The Input source of MagicNet works only on Magi cNet model. 12. Troubleshooting 1. The disp lay you wish to cont rol does not a ppear on the Powe r Control Info Grid - Check the conn ection of RS23 2C.
One of the re cent problems in using a compute r is that the col or of the images pri nted out by a prin ter or other imag es scanned by a sc anner or a digita l camera are not the same as those shown o n the monitor. The Natural Color S/ W is the very solutio n for this problem.
Input Available Mode : PC / BNC / DVI : AV : S-Video : Compon ent : MagicNet OSD Description Play Source List Use to select PC, BNC or other ext ernal input so urces connected to th e Monitor. Use to select the screen of your choice. - The direct button on the remote control is 'SOURCE' button.
those devi ces in a small window supe r-imposed on the PC Video signal. (Off/On) More than one PIP c ouldn't be overlapped on screen as BNC and the co mponent use the same terminal. 1) PIP - The direct button on the remote control is ' PIP ' button.
Picture PC / BNC /DVI Mode Available Mode : PC / BNC / DVI : AV : S-Video : Comp onent : MagicNet OSD Description Play MagicBright™ MagicBright ™ is a new featu re providin g the optimum viewing env ironment depend ing on the con tents of the im age you are watc hing.
4) Custom Color Control Adjust th e individual R, G, B color con trols. 1) Red 2) Green 3) Blue If you adjust picture using Color Control func tion, Color Tone will turn to Custom mode. Image Lock Image Lo ck is used to fine -tune and get the b est image by removing n oise that create s unstable images with jitter and shimmer.
Available Mode : PC / BNC / DVI : AV : S-Video : Comp onent : MagicNet OSD Description Play Mode The Monitor has four auto matic picture settings ("Dynamic", "Standard", "M ovie" and "Custo m") th at are preset at the factory.
clearer and crisp er images. Off On Film Mode You can tu rn Film Mode Off/On. The Film Mod e feature offers you a theater-qua lity viewing experience. Off On DNIe Demo - Digital Natural I mage engine Samsung's new technolo gy brings you mo re detailed i mages with cont rast and whi te enhancemen t and 3D nois e reduction.
OSD Description Play Mode The Monitor h as a built-in high fidelity stereo amplifier. 1) Standard : Choose Standa rd for the standard f actory settings. 2) Music : Choose Music when watching m usic videos or conc erts. 3) Movie : Choose Mov ie when viewin g movies.
Available Mode : PC / BNC / DVI : AV : S-Video : Compon ent : MagicNet OSD Description Play Time Use to choose on e of 4 time setti ngs, Clock Set, S leep Timer, On Timer, an d Off Timer. 1) Clock Set : Current Time Set ting. 2) Sleep Timer : Use to set the Monito r to turn off automatically in certain minutes.
Video Wall A Video Wall is a set of vide o screens that are connecte d together , so that each screen sho ws a part of the wh ole picture or so th at the same picture is rep eated on each s creen. 1) Video Wall : Turns Off/On the Video Wall function of the selected display.
3) Second : Determines the time pe riod to run the Screen Scrol l operation. (1~5 Seconds) By default, the time is set to 5 seconds. 1~5 Seconds Multi Control Available Mode : PC / BNC / DVI : AV : S-Video : Compon ent : MagicNet OSD Description Play Multi Control Assigns individual ID to the SET.
Available Mode : PC / BNC / DVI : AV : S-Video : Compon ent : MagicNet OSD Description Play MAGICNET Move to the M agicNet OSD screen. MDC Move to the Multi Con trol OSD screen. LOCK Set th e Safety Lock function. 1) Lock On : It will be locke d on. 2) Lock Off : It wil be locked off.
z The operating system for this set supports En glish only so the other langu ages might be corrupt on screen. z For MagicNet, th e remote control is available for its opera tion. However, yo u are recommended to use a separate U SB keyboard. z For MagicNe t with the Device m ode, moving d evice surroundi ng while booti ng may cause errors.
2) Full Size : Plays a movie file in full screen. 2) Full Size OFFICE/HTML PPT(Power Po in t) , DOC (M S Wor d) , XL S( M S Ex cel ) , PDF , HTML, HTM files are displayed. Internet Connects to the Intern et. Setup You can set vario us functions in Magic Net mode.
Input Available Mode : PC / BN C / DVI : AV : S-Video : Component OSD Description Play Source List Use to select PC, BNC or other ext ernal input so urces connected to th e Monitor. Use to select the screen of your choice. - The direct button on the remote control is 'SOURCE' button.
Video signal. (Off/On) More than one PIP c ouldn't be overlapped on screen as BNC and the co mponent use the same terminal. 1) PIP - The direct button on the remote control is ' PIP ' button. Off On : Turn the PIP Screen on or o ff. 2) Source - The direct button on the remote control is ' SOURCE ' button.
Available Mode : PC / BN C / DVI : AV : S-Video : Component OSD Description Play MagicBright™ MagicBright ™ is a new featu re providin g the optimum viewing env ironment depend ing on the con tents of the im age you are watc hing. Currently four different modes are av ai la ble: En terta in, Internet,Text and Custom .
3) Blue If you adjust picture using Color Control func tion, Color Tone will turn to Custom mode. Image Lock Image Lo ck is used to fine -tune and get the b est image by removing n oise that create s unstable images with jitter and shimmer.
Available Mode : PC / BN C / DVI : AV : S-Video : Component OSD Description Play Mode The Monitor has four auto matic picture settings ("Dynamic", "Standard", "M ovie" and "Custo m") th at are preset at the factory.
clearer and crisp er images. Off On Film Mode You can tu rn Film Mode Off/On. The Film Mod e feature offers you a theater-qua lity viewing experience. Off On DNIe Demo - Digital Natural I mage engine Samsung's new technolo gy brings you mo re detailed i mages with cont rast and whi te enhancemen t and 3D nois e reduction.
OSD Description Play Mode The Monitor h as a built-in high fidelity stereo amplifier. 1) Standard : Choose Stan dard for the standard f actory settings. 2) Music : Choose Music w hen watching music videos or concerts. 3) Movie : Choose Mov ie when viewin g movies.
Available Mode : PC / BN C / DVI : AV : S-Video : Component OSD Description Play Time Use to choose on e of 4 time setti ngs, Clock Set, S leep Timer, On Timer, an d Off Timer. 1) Clock Set : Current Time Set ting. 2) Sleep Timer : Use to set the Monito r to turn off automatically in certain minutes.
Video Wall A Video Wall is a set of vide o screens that are connecte d together , so that each screen sho ws a part of the wh ole picture or so th at the same picture is rep eated on each s creen. 1) Video Wall : Turns Off/On the Video Wall function of the selected display.
3) Second : Determines the time pe riod to run the Screen Scrol l operation. (1~5 Seconds) By default, the time is set to 5 seconds. 1~5 Seconds Multi Control Available Mode : PC / BN C / DVI : AV : S-Video : Component OSD Description Play Multi Control Assigns individual ID to the SET.
Available Mode : PC / BN C / DVI : AV : S-Video : Component OSD Description Play MDC Move to the Multi Control OSD scre en. LOCK Set th e Safety Lock function. 1) Lock On : It will be locke d on. 2) Lock Off : It wil be locked off. When setting the Lock function, you can only operate power and lock buttons on the remote control and set.
Introduction to MagicNet | Sc hedule OSD | MDC | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Introduction to MagicNet MagicNet transmits media files (p.
This function prevents a random us er from freely using MagicNet, by pl acing limits on the operation of functions according to the account privilege. 3. Update You can update a monitor's Ma gicNet from the server. However, this function only works wh en it is connected to a server/monito r with MagicNet Ver 2.
Introduction to MagicNet | Schedule OSD | MDC Adjustment | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Schedule OSD The server program's Power-On option works only if the mo nitor's power is completely shut off.
Library List Files added to the library are first, automatically clas sified in the list as movie, audio, photo and office files, and then they are further clas sified according to their properties. z All file : Displays all files whic h are registered in the library.
File Information This will display the name, date, size and resolution of the current file. MagicNet/Network On/Off Stat us or Image Selection Menu Extended Image Menu Displays the On and Off status for the power and the network. Selecting an image file will change to the appropriate image menu.
Controls for play, stop, next file, previous file , and volume when playing a movie or audio file. Play / Pause z When the files are selected in the library list : Plays the audio/movie files regis tered with the library list. z When monitoring information is be ing played from a schedule : Plays the audio/movie files reg istered with the schedule.
select an input source or Power Of f from the Input/Power Selection. 3. Set the schedule time and press the confirm button. It will change into the registered output source at the start of the schedule, and it will correctly return to the MagicNet Menu screen when the schedule is over.
Lists the names of monitors registered via the network. When a monitor is connected to the network, its background color changes to yellow-green. z Reconnect to another server automatically 1.
2. Select Monitor : The schedules of the relevant monitor is queued. z Rename Type a new name and click confirm. The new name will be saved. Fields Window Displays the status of a file. z When selecting All Monitors in the Schedule, you can view all schedules registered for each monitor.
Introduction to MagicNet | Schedule OSD | MDC Adjustment | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Spe cifications MDC Adjustment Multiple Display Control (MDC) is a function for easily controlling several monitors from a PC.
PIP Settings Maintenanace Power Select Power ON/OFF. z ON z OFF When changing the volume, the changed details will appear in an OS D on the monitor screen. z 0 ~ 100 Source In the source tab, the output source of the monitor can be changed. When selecting the following output source, it will change to the relevant output source.
z 4:3 Time 1. Current Time Establishes the standard time of the monitor. In Hours, Minutes and AM/PM, select the time, and click the Apply button. The current standard time of the monitor will be set. To activate the On/Off Timer at the set time, the Current Time must be set.
1. Picture For input sources other than for PC signals, adjust the Contrast, Brightness , Sharpness, Color, Tint and Color Tone of the monitor. z Contrast z Brightness z Sharpness z Color z Tint z Color Tone 2. Picture PC When the output source s are PC signals, adjust the Contrast, Brightness , Sharpness, Color, Tint and Color Tone of the monitor.
z Period z Time 3. Video Wall This offers a function that enables you to use severa l monitors as one screen. First, select the button that sets the number of monitors to be used and their allocation. The allocation figure w ill appear as a selectable button on the side.
Introduction to MagicNet | Schedule OSD | MDC Adjustment | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Upper Menu Login / Logout Change Password Options Help Login / Logout Before using MagicNet, you first need to login.
Change Password You can change your password in the login status. Enter your password correctly before logging in. You will be prompted to enter the password for installing MagicN et, and this password will become the default password for the administrator account.
Copy File Delete File When selecting Options ¡æ File Manager, the File Management window appears. You can select a server/monitor from the select list. When selecting a monitor from the left window, you are only allowed to select the same monitor. After selecting the copy target, press the copy button.
Introduction to MagicNet | Schedule OSD | MDC Adjustment | Upper Menu | Remote Control Adjustment | Remov ing Program | Troubleshooting | Specifications Remote Control Adjustment PHOTO Supported File .
Move to the previous page (when the current page is the last, it will move to the first page) File view on the curs or position Play MOVIE Supported File Formats Video File : MPEG1, MPEG2-PS, DIVX4, D.
File view on the cursor position z PDF Move to the top Move to the bottom Move to the next page Move to the previous page Exit PDF z Excel Move to the upper cell Move to the lower cell Move to the lef.
z Power point Slideshow Stop slideshow Move to the top Move to the bottom Move to the next page Move to the previous page Exit Power point z Word Move to the top Move to the bottom Move to the next pa.
.
Introduction to MagicNet | Schedule OSD | MDC Adjustment | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Removing Program You can remove MagicNet by using the Add/Remove Op tions in Windows Programs or by using the delete menu provid ed when installing this program.
Introduction to MagicNet | Schedule OSD | MDC Adjustment | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Troubleshooting In Preview, the file information can be viewed but not the image Office files are not displayed.
Introduction to MagicNet | Schedule OSD | MDC | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Specifications Supported File Format Spec File Format Resolution Bit rate Audio Sampling rate CBR VBR Video MPEG1 720x480 or less 9Mbps or less Peak bitate 9Mbps or less MPEG2 (PS) - DivX 4.
: FAT(File Allocation Table) System Exception : Some manufacturers have wrongly specified thei r device to be USB st andard compatible. Our product has exception handling procedures. But Some devices are unlikely to work properly. : Some manufacturers ha ve wrongly specified their device to be SCSI compatible.
Self-Tes t Feature Ch eck Check the fo llowing items yourself bef ore calling for se rvice. Contac t the Service Center for problems that you cannot solve by y ourself. Self-Test Fea ture Check | Not Optimum Mode | Maintena nce and Clea ning | Symptoms & Reco mmended Ac tions 1.
Refer to Specifications > Preset Timi ng Modes for the resolutions or frequenci es that are supported by the monitor. 3. Maintenance and Cleaning 1. Maintaining the Monitor Case. Clean with a soft cloth af ter disconne cting the power co rd. 2. Main taining the Flat Pa nel Display Sc reen.
Problems Solutions Screen is blank and power indicator is off z Ensure that the power cord is firmly connected a nd the LCD monitor is on. (Refer to the Connec ting the Mon itor ) "Check Signal Cable" message z Ensure that the signal cable is firmly co nnected to the PC or video sources.
card or softw are program. Sound is too high pitched or too low pitched z Adjust the Trebl e and Bass to appropri ate level. 4. Problems related to Re mote Control Problems rel ated to the re mote contro l and their solut ions are li sted. Problems Items to check The remote control buttons do not respond.
General Genera l Model Name SyncMaster 46 0Pn LCD Pa nel Size 46" Diag onal Display area 1018.353mm (H) x 5 72.544mm (V) Pixel Pitch 0.7455mm (H) x 0.74 55mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 70 kHz Vertical 50 ~ 85 Hz Display Color 16.
Power Consumption Less than 310W Power Sav ing Less than 5W Dimensions (WxHxD)/ Weight 1,102 X 658 X 126.5mm / 43 .4 X 25.9 X 5.0 inc h / 28kg 1,102 X 715 X 293mm / 43.4 X 28.1 X 11.5 inch (W ith Stand) - Op tion / 30kg 1,312 X 715 X 293mm / 51.7 X 28.
Internet Browser MS Internet Explorer No t Support Fl ash, Java Applet, Security Site Language En glish OS Window s CE 5.0 MagicNet - Server Requ irement CPU RAM Eth ernet OS Application Minimum P1.8Gh z 256M 100M Window s XP WMP 9 or later Recommended P3.
VESA, 800 x 600 37.879 60.317 40. 000 +/+ VESA, 800 x 600 48.077 72.188 50. 000 +/+ VESA, 800 x600 46.875 75.000 49. 500 +/+ VESA, 800 x600 53.674 85.000 56. 250 +/+ VESA, 1024 x 768 48.363 60.004 65. 000 -/- VESA, 1024 x 768 56.476 70.069 75. 000 -/- VESA, 1024 x 768 60.
General Genera l Model Name SyncMaster 46 0P LCD Pa nel Size 46" Diag onal Display area 1018.353mm (H) x 5 72.544mm (V) Pixel Pitch 0.7455mm (H) x 0.74 55mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 70 kHz Vertical 50 ~ 85 Hz Display Color 16.
Power Consumption Less than 300W Power Sav ing Less than 5W Dimensions (WxHxD)/ Weight 1,102 X 658 X 126.5mm / 43 .4 X 25.9 X 5.0 inc h / 28kg 1,102 X 715 X 293mm / 43.4 X 28.1 X 11.5 inch (W ith Stand) - Op tion / 30kg 1,312 X 715 X 293mm / 51.7 X 28.
Option : SPEAKER L/ R(8 Ω , 10W) Preset Timing Modes If the signal transf erred from the compute r is the same as th e following Prese t Timing Modes, th e screen will be adjusted automatically. Howe ver, if the signal differs, the screen may go blank wh ile the power LED is on.
Service The address and p hone number of the com p an y can be chan g ed without p revious notice. AUSTRALIA : Samsung Electronic s Australia Pty Ltd. Customer Response Centre 7 Parkview D rive, Homebu sh Bay NSW 2127 Tel : 1300 362 603 http://www.samsung.
Ciencies, 55-65 (Poligon o Pedrosa) 0 8908 Hospital et de Llobre gat (Barcelon a) Tel. : (93) 26 1 67 00 Fax. : (93) 261 67 50 http://samsung.es/ FRANCE : SAMSUNG ELECTRONICS FRANCE Servic e Paris Nor d 2 66 rue des Vanesses BP 50116 Vi llepinte 95950 Roissy CDG Cedex Tel : 08 25 08 65 65 Fax : 01 48 63 06 38 http://www.
PERU : Servicio I ntegral Sam sung A v.Argentina 17 90 Lima1. Peru Tel: 51 -1-336-8686 Fax: 51-1-336 -8551 http://www.samsungperu .com/ PORTUGAL : SAMSUNG ELECTRONICA PORTUGUESA S.A. Rua Mário Dioniso, N o 2 - 1º Drt. 2795- 140 LINDA-A-V ELHA Tel. 214 1 48 114/100 Fa x.
Terms S y nc Si g nal Sync (Synchronized) Signa ls refer to the standard si gnals that are requ ired to display desired col ors on the monitor. The y are divided into V ertical and Horizonta l Sync Signals. These signals display normal color images b y the set resolution an d frequency.
{ Vertical f requency (ref resh rate): 60 Hz 2. TFT LCD pa nel manufacture d by using ad vanced semicond uctor technolog y with precision of 1ppm (one million th) above is used for this product. Bu t the pixels of RED, GREEN, BLUE a nd WHITE color seem to be brigh t sometimes or some of black pixels could b e seen.
PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have image retentio n when switching from one image to an other especially after displaying a statio nary image for a long time. This guide is to demonstrate corre ct usage of LC D products in order to protect them from Image retention.
The best way to prote ct your monitor from Image retention is to s et your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is operate d under normal conditions. Normal conditions are defined as continuously changing vi deo patterns.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate col lection systems) This mark.
An important point after buying a device Samsung 460Pn (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung 460Pn yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung 460Pn - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung 460Pn you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung 460Pn will certainly help you make a decision on the purchase.
If you already are a holder of Samsung 460Pn, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung 460Pn.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung 460Pn. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung 460Pn along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
