Instruction/ maintenance manual of the product PRO 9842 Audiovox
Go to page of 9
Model PRO 9842 Installation Manual V ehicle Alarm System With Channel 2 Auxiliary Output Installation Instructions This Unit Is Intended For Installation In V ehicles With 12 V olt Negative Ground Ele.
The PRO 9842 V ehicle Alarm System is designed to provide a basic deterrent to vehicle theft, and a convenient electronic means to gain access to the vehicle by providing RF remote control over the vehicle's power door lock system.
3 area that may be seen from the driver ’s seat as well as from out side the vehicle. Try to choose a location close enough to the Control Module so that the LED's wires will reach. Carefully inspect the area behind your chosen location to insure that the drill will not penetrate any existing factory wiring or fluid lines.
4 to connect to only one door switch in order to detect the opening of all doors. In a few cases this will not be true, making it necessary to connect to the vehicle dome light, or isolate door trigger wires. Locate the vehicle's negative door trigger wire in the vehicle's kick panel, under-dash or the vehicle's pin-switch.
5 to the start (crank) position and will have 0 volts in all other key positions. Connect one side of the cut wire to terminal #87a of the relay . Connect the other side of the cut wire to terminal #30 of the relay .
6 PLUG-IN CONNECTIONS AND COMPLETING THE INST ALLA TION: Now that all the other components have been installed, and most of the main connections completed, it is time to finish connecting the remaining plug-in components and completing the installation.
7 Programmable Features: Features 1 Chirp 2 Chirp Default First Passive Arming Active Arming Passive Arming Second Ignition D/L ON Ignition D/L OFF Ignition D/L OFF Third Ignition D/UL ON Ignition D/U.
8 ÿþý ü ûú þ ý ü ü þ ú ÿ ú úþ þ ÿú üþ þ ÿý ý ü ü þú þÿ þ .
9 © 1999 Audiovox Corp. 128-5451 PRO 9842 T o (Optional) Plug-In Shock Sensor.
An important point after buying a device Audiovox PRO 9842 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO 9842 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO 9842 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO 9842 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO 9842 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO 9842, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO 9842.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO 9842. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO 9842 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
