Instruction/ maintenance manual of the product PRO 9644aUGH Audiovox
Go to page of 10
128-6885 1 of 10 Model PRO 9644aUGH Owner ’s Manual 3 Button Remote Security System with Starter Disable IMPORT ANT ! In order to provide the highest possible level of security to your vehicle, this system is equipped with selectable manual override circuitry .
128-6885 2 of 10 YOUR " CODE HOPPING " TRANSMITTERS The transmitters included with your new security system use the most advanced and secure form of radio frequency transmission available on any current automotive security system.
128-6885 3 of 10 If the siren "chirped" three times, sometime after arming, the exclusive delayed dome light learn circuit has been programmed and the system detected a open entry point after the learned delay expired.
128-6885 4 of 10 o Whenever the system is triggered, the vehicle’s horn will beep for the full 30 second alarm cycle, attracting added attention to the vehicle. o Optional - Whenever the system is triggered, the interior courtesy lights will flash for the full 30 second alarm cycle.
128-6885 5 of 10 SILENT DISARMING 1. As you approach the vehicle, press and hold the Unlock button on the keychain transmitter for 2 seconds. þ Red dash mounted LED turns off. If passive arming was selected during the installation, then the LED will start flashing rapidly , indicating that the system is re-arming automatically .
128-6885 6 of 10 If the LED is flashing one time...pause...one time...pause...etc., then an intrusion attempt was made to the OPTIONAL shock sensor, or an accessory triggering device that may have been added to the system. If the LED is flashing two times.
128-6885 7 of 10 Page 7 1. Disarm the system by use of the transmitter , or by use of the emergency override sequence. Turn the ignition switch to the on position. 2. Within 10 seconds, press and release the valet/override switch, 3 times. 3. Within 10 seconds turn the ignition switch off, on, off, on, off, on.
128-6885 8 of 10 Page 8 NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code.
128-6885 9 of 10 Page 9 mode, anytime the unlock button is pressed, the panic feature will continue for the allotted 30 seconds, however , the security system will be disarmed allowing the vehicle to start.
128-6885 10 of 10 PRO 9644aUGH SYSTEM FUNCTIONS A T A GLANCE DASH LED INDICA TORS RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = ARMED OF F = DISARMED ON S OL ID = V ALET MODE 3 FLASH...P AUSE = INTRUSION ZONE 3 2 FLASH...P AUSE = INTRUSION ZONE 2 1 FLASH.
An important point after buying a device Audiovox PRO 9644aUGH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO 9644aUGH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO 9644aUGH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO 9644aUGH you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO 9644aUGH will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO 9644aUGH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO 9644aUGH.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO 9644aUGH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO 9644aUGH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
