Instruction/ maintenance manual of the product 275TPLUS Samsung
Go to page of 65
Install drive r Install p ro g rams SyncMaster 2 75 T PLUS.
Notation Failure t o follow di rections not ed by this symb ol could resu lt in bodily harm or dama ge to the equipment . Prohibited Important to read and understand at all times Do not disassembl e D.
Do not use a damaged o r loose plug . This may caus e electric shock or fire. Do not pul l the plug out by the wi re nor touc h the plug with wet ha nds. This may caus e electric shock or fire. Use only a pr operly grounde d plug and rece ptacle. An improper ground may cau se electric sh ock or equip ment damage .
To disconnect the apparatu s from the mai ns, the plug must be pull ed out from the mains sock et, therefo re the mains plu g shall be read ily operable.
Otherwise, this ma y cause fire. Keep any he ating devices aw ay from the power cabl e. A melted coating may cause electric shock or f ire. Do not instal l the product in places with p oor ventilation , for instance , a bookshelf, closet, etc. Any increase in the internal tempera ture may cause fire.
Cleanin g and Usin g When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent d irectly onto the monito r. This may caus e damage, el ectric shock or fire. Use the recom mended deterge nt with a smooth cloth.
If your monitor d oes not opera te normally - in particular, if there is any unusual soun d or smell coming from the monitor - contact an auth orized dealer or t he Serv ice Center. This may cause el ectric shock or fire. Keep the pr oduct away f rom places e xposed to oil , smoke or moist ure; do not install inside a ve hicle.
Keep the pr oduct away f rom combusti ble chemical sp rays or infl ammable substances. This may cause an explosion or fire. Never inse rt anything meta llic into th e monitor open ings.
When moving the monitor, turn off and unplug the pow er cord. Make sure that a ll cables, includin g the anten na cable and cables connec ted to other de vices, are disconnect ed before m oving the mo nitor. Failure to di sconnect cables may damage it and cause fire or electric shock.
Correct Disposal of This Pro duct (Waste Elect rical & Elec tronic Equip ment) - Europe on ly (Applicab le in the Eu ropean Unio n and other E uropean c ountries with separate co llection systems).
PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have an image retent ion when sw itching from one image to another especially after displaying a statio nary image for a long time. This guide is to demonstrate a corre ct usage of LCD products in order to prote ct them from Image retention.
Ex) The best way to prote ct your monitor from Image retentio n is to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is opera ted under normal conditio ns. Normal conditions are defined as continuously changi ng video patterns.
Packa g e Contents Please mak e sure the follo wing items a re included with your mo nitor. If any items are missing, conta ct your de aler . Contact a local dealer to buy optional items.
Quick Setup Guide Warranty Card (Not availa ble in al l locations ) User's Guide, Monitor Driver, Natural Color, MagicTun e™ Cable Power Cord D-sub Ca ble USB Cabl e Others Cleani ng Cloth This is only pr ovided for hi ghly polish e d black prod ucts as a produ ct feature.
Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD m enu or return to th e previous menu. Adjust bu ttons [ ] These butto ns allow you t o adjust items in the menu.
Select this mode to view a sharper ima ge than in "Sta ndard" mode. 2) Standard Select this mode when th e surroundings are bright. This also pro vides a sharp image. 3) Movie Select this mode when th e surroundings a re dark. This will save power and reduce eye fat igue.
The configu ration at th e back of the monitor may vary from product to p roduct. POWER S/W / POWER POWER S/W : Switch the mon itor on and off. POWER : Connect the power cord for yo ur monitor to the POWER port on the bac k of the monitor.
Kensington Lo ck z The Kensi ngton lock is a device us ed to physica lly fix the system when u sing it in a public pla ce. (The locking device has to be purchased se parately.) For using a loc king devi ce, contac t where you pu rchase it. Stand Stoppe r z Remove th e fixing pi n on the stand t o lift the monitor up an d down.
Connectin g Cables Connect t he power cord fo r your monitor to the POWER port on the back of the monitor. Plug the power cord for the m onitor into a nearby outlet. Use a connec tion appr opriate for your comput er. Using the RGB (A nalog) co nnector on the video card.
The USB port of the monitor suppor ts High-Speed Certified USB 2.0. High speed Full spee d Low speed Data Rate 480 Mbps 12 Mbps 1.5 Mb ps Power Cons umption 2.5 W (Max., each port) 2.5 W (Max., each port) 2.5 W (Max., each port) Connect t he UP port of the mo nitor and th e USB port o f the compute r with the US B cable.
Connectin g a S p eake r When connecting a sp eaker, be carefu l that the grooves of th e monitor and the speaker . ( )are al igned with ea ch other. A djust the a ligned positi ons until you hear a ‘click ’. If a speak er is connecte d correctly, you can hear a ‘click’.
Connect a headphone t o the black term inal at the right of the sp eaker. Connect a micro phone to the red te rminal at the right of the speaker. By turning part ( + , - ) in the d irection shown in th e figure below, the spe aker turns on and the volume in creases.
Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the P R , P B , Y input ports us ing a component vi deo cable (P R , P B , Y). Then, start the DVD with a DVD disc inserted. Select Comp onent usi ng the ' ' button. To hear sou nd, refer to the Connecti on section of your connct ed external de vice manual .
Slidin g stand Stand Stoppe r Swivel stand Using ( ),You can swivel the monito r left and ri ght at an an gle of 350° to set the monit or lengthwise. The rubber und er the stand is t o avoid the mon itor slide.
Using ( ), You can a djust the tilt anl gle within a rang e of 3° forwar d to 25° backward fo r the most comforta ble viewing a ngle. Attachin g a Base This monitor a ccepts a 200 mm x 100 mm VE SA-complian t Mounting in terface pad . Monitor Mounting interface pad (Sold sepa rately) 1.
inside of the Monitor. z For wall moun ts that do not com ply with VESA standard screw specif ications, the length of the s crews may differ d epending on their specific ations. z Do not use screws tha t do not comply w ith the VESA standard screw specifications .
Monitor Driver When prompted by the operating system for the monitor driver, in sert the CD-ROM inc luded with thi s monitor. Driver i nstallation is sl ightly differen t from one op erating system to another. Foll ow the directions a ppropriate for the operatin g system you have.
This monitor driver i s under certifying MS logo, and th is installation does n't damage your system. The certi fied driver wi ll be posted on Samsung Mon itor homepa ge http://www.
Click "Properties" in the "M onitor" tab. If th e "Properties" bu tton is deactivated , it means the configura tion for you r monitor is com pleted. The mo nitor can be u sed as is. If the message “Windows needs …” is displayed, a s shown in the figure be low, click "Continue".
Click "Have Disk…" and select the folde r (for example, D :Drive) where the driver setup f ile is located, an d click "OK". Select th e model that matches your m onitor from the list of mo nitor models on the screen, a nd click "Nex t".
Click "Disp lay" icon and choo se the "Settin gs" tab then click "Adva nced." Click the "Prope rties" but ton on the "Moni tor" tab an d select "Driver" ta b. Click "Upd ate Driver." an d select "Ins tall from a list or.
Click the "Browse" b utton then ch oose A:(D:Dri ver) and choos e your monito r model in t he model list and click the "Next" bu tton. If you can see following "Mes sage" window, then click the "Con tinue Anyway" but ton.
Monitor driver installation is comple ted. Micros oft ® Windows ® 2000 Opera ting System When you can see "Digit al Signatur e Not Found" o n your monito r, follow thes e steps. How to install Choose the "OK " button on the "Insert disk" window.
In the Display Registration Info rmation window, cl ick the Set tings tab and then click "All Display Modes". Select a mod e that you wis h to use (Resolu tion, Number of colors and V ertical frequency ) and then click "OK".
Insert the CD includ ed with the Samsu ng monitor in to the CD-ROM D rive. The initia l Natural Color screen will appear. Click on Natura l Color in the startup window to in stall the Natural C olor software.
z 32MB Memory abov e z 60MB Hard d isk space above * For more information, visit the MagicTune™ webs ite . Uninstall The MagicTu ne™ program can be remo ved only b y using the "Add or Remo ve Progra ms" option of the Windows® Con trol Panel.
Control Buttons Use this button to open the on-screen men u and exit fro m the menu scre en or close screen adjustm ent menu. PC/DVI(PC) : M agicBright™ MagicBri ght™ is a new f eature provi ding the opt imum viewin g environmen t depending on the contents of the image you are watchi ng.
This button allo ws you to adju st items in the menu. When OSD is not on the screen, p ush the button to a djust brightness. Press this button to activate a highlighte d menu item. Selects the input signal while the OSD is off. AUTO Press to self-adjus t to the in coming Ana log signal.
OSD Lock & Unlock When pressing the A UTO or PIP button after locking the OSD When pressing the M ENU button after lo cking the OSD Menu Descript ion Locked This is the function th at locks the OSD in order to keep the curren t states of settings or prevent ot hers from adju sting the curre nt setting s.
Though the OSD adjustm ent lock function is a ctivated, you ca n still adjust the bright ness and cont rast, and adj ust MagicBrig ht ( ) using the Direct button.
Menu Descript ion Brightness When OSD is not on the screen, p ush the button to adjust brightness. SOURCE Menu Descript ion SOURCE Selects the input signal while the OSD is off.
Changing the source is only a llowed for external devices th at are conn ected to the monitor at the time. PIP ( Available in PC/DVI ( PC ) Mode Onl y ) Menu Descript ion PIP Push the PIP button t o turn PIP screen On/Off. You can view a picture from AV, S-Video, o r Componen t through t he PIP screen in PC and DVI (PC ) mode.
The default setting may di fferent de pending on th e selected Input Mode (input signa l source selec ted in Extern al Input Li st) and the sele cted resolutio n. Menu Description Play/Stop Source List Use to select PC or o ther exte rnal input sour ces connect ed to the Monitor.
The default setting may di fferent de pending on th e selected Input Mode (input signa l source selec ted in Extern al Input Li st) and the sele cted resolutio n. Menu Description P lay/Stop MagicBrigh t™ MagicBright ™ is a new fe ature provid ing optim um viewin g environme nt depending o n the conte nts of the imag e you are watching.
Custom - Not available in MagicBright™ mode of Dynam ic CR. MENU → , → → , → → , → → , → 2) Brightne ss : Adjust the Brig htness. Brightness If you adj ust picture us ing Custom fu nction, Magic Bright™ wi ll turn to Cust om mode.
Picture ( AV/S- V ideo/Com p onent/HDMI ) The default setting may di fferent de pending on th e selected Input Mode (input signa l source selec ted in Extern al Input Li st) and the sele cted resolutio n.
MENU → , → → , → → , → → , → Size You can switch t he Size. MENU → , → → , → → , → z AV / S-Video : Wide / 16: 9 / Zoom1 / Zoo m2 / 4:3 z Component / HDMI : Wide / 16:9 / 4:3 Film Mode You can turn Film M ode Off / On. The Film Mod e feature offers you a theater -quality viewing experience.
MENU → , → → → , → depending on you r taste. If this is the ca se, adjust the Picture an d Color menu by using the OSD to fit you r eyes. Color Tone Adjusts the individual R, G, B color contro ls.
The default setting may di fferent de pending on th e selected Input Mode (input signa l source selec ted in Extern al Input Li st) and the sele cted resolutio n. Menu Description Play/Stop PIP Turn the PIP Screen on or of f. You can view a p icture from AV, S -Video, or Co mponent thro ugh the PIP screen in PC and DVI mode.
The default setting may di fferent de pending on th e selected Input Mode (input signa l source selec ted in Extern al Input Li st) and the sele cted resolutio n. Menu Description P lay/Stop Language You can choo se one of 11 lang uages. MENU → , → → → , → Transparenc y Changes t he opaqueness o f the backgro und of the OSD.
Safety Screen - The Screen Scrol l function scrolls th e screen for the sp ecified period of time. - This function is not a vailable when the p ower is turned off. MENU → , → → , → → , → 1) Safety Screen : Determines whether t o turn the Screen Scroll fun ction Off or On.
Check List Before calling fo r service, check the infor mation in this section to see if you can remedy any problems yours elf. If you do need assistance, please call the phone number o n the Informati on section or c ontact your dealer . Symptom Check List Solutions No images on the screen.
There is no im age on the screen. Is the power indicat or on the monitor bl inking at 1 second interva ls? The monitor i s in PowerSav er mode. Press a key on th e keyboard to activate the m onitor and restore the imag e on the s creen. If there is still no image, press the ' ' bu tton.
Has the video c ard been set properl y? Set the video card by referrin g to the video ca rd manual. There is a message that reads "Unrecog nized monitor, Plug & Play (VESA DDC) monitor found". Have you inst alled the monitor driver? Install the monitor driver accord ing to the Driver Installation Instru ctions .
Note that vide o card support can vary, dependin g on the version of the driver use d. (Refer to the computer or the video ca rd manual for details.) How can I adjust th e resolution? Windows XP : Set the resolu tion at the Co ntrol Panel → Appearance and Themes → Display → Settings.
monitor. If your monitor screen rema ins blank after using the previous procedure, check your vide o controller and computer sy stem; your moni tor is func tioning pr operly.
S p ecifications General Model Name SyncMaster 275TPLUS LCD Panel Size 27" Wide Diagon al (68 cm) Display area 581.76 mm(H) x 363.6 mm(V) Pixel Pitch 0.303 mm(H) x 0.303 mm(W) Synchron ization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.
AC 100-240 VAC ( ± 10 %), 60/5 0 Hz ± 3 Hz Signal Cable 15pin-to- 15pin D-su b cable, Deta chable DVI-D to DVI- D connecto r, Detacha ble (Sold sepa rately) Dimensions (W x H x D) / Weight 629.0 X 410.5 X 81.0 mm / 24.8 x 16.2 x 3.2 inch (Withou t Stand) 629.
Power Indicator Blue Blue Blinki ng Black P o wer C o n s u m p t i on Less t h an 1 3 0 w at t s Le s s t h an 2 W a tts Le s s t h an 0 W a tts This monito r is EPA ENERGY STAR ® compliant and ENER GY2000 compliant wh en used with a comput er equipped with VESA DPM functi onality.
1024 VESA, 1280 x 1024 79.976 75.025 135 .000 +/+ VESA, 1600 x 1200 75.000 60.000 162.000 +/+ VESA, 1920 x 1200 74.038 59.950 154.000 +/- Horizontal Frequen cy The time to s can one li ne connecting t.
Contact SAMSUNG WO RLDWIDE If you have any questions or comm ents relati ng to Sa msung products , please cont act the SAMSUNG customer care c enter. North America U.S.A 1-800-SAMSUN G (726-7864) http://www.samsung.com/us CANADA 1-800 -SAMSUNG (726-7864) http://www.
Europe AUSTRIA 0800-SAMSUNG( 726-7864) www.samsung.com/at BELGIUM 0032 (0)2 201 24 18 http://www.samsun g.com/be CZECH REPUBLI C 844 000 844 http://www.samsung. com/cz DENMARK 70 70 19 70 http://www.samsung. com/dk FINLAND 030-6227 515 http://www.samsung.
UZBEKISTAN 8-800 -120-0-400 http://www.samsun g.uz Asia Pacific AUSTRALIA 130 0 362 603 http://www.samsung. com/au CHINA 800-810-585 8, 010- 64 75 1880 http://www.samsung.com. cn HONG KONG 3698-4698 http://www.samsung. com/hk INDIA 3030 8282 1800 110011 http://www.
Interlace and Non-Interlace Methods Showing the h orizontal line s of the scre en from the top t o the bottom in order is calle d the Non- Interlace meth od while showi ng odd line s and then ev en lines in turn is called the Interlace method . The Non-Inte rlace method is u sed for the ma jority of moni tors to ensure a clea r image.
If there's stil l noise afte r automati c adjustme nt, use FINE/COA RSE adjust ment function . If you view a f ixed screen fo r an extended p eriod of tim e, residual imag e or blurrin ess may appear.
An important point after buying a device Samsung 275TPLUS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung 275TPLUS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung 275TPLUS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung 275TPLUS you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung 275TPLUS will certainly help you make a decision on the purchase.
If you already are a holder of Samsung 275TPLUS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung 275TPLUS.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung 275TPLUS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung 275TPLUS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
