Instruction/ maintenance manual of the product PRO 9233N Audiovox
Go to page of 8
128-8504 1 of 8 Congratulations on your purchase of this automotive Keyless Entry Upgrade Alarm System. This system is a state - of - the - art auto security system that is designed to automatically arm and disarm when it receives a command from your existing Factory Keyless Entry Transmitter.
128-8504 2 of 8 Page 2 3. In 30 seconds, you will hear a single short chip from the siren, and the vehicle’s parking lamps will flash one time, indicating that the system has ARMED. At this time, the red dash mounted LED will begin to flash slowly, providing a visual indication that the system is fully armed.
128-8504 3 of 8 vehicle’s doors will suspend the passive arming process until all doors have been closed, or until the ignition key has been turned on. INTRUSION WARNING SIGNALS : The system will inform you if an intrusion attempt has occurred while you were away from the vehicle.
128-8504 4 of 8 MANUALL Y OVERRIDING YOUR SYSTEM: USING SIMPLE V ALET SWITCH MANUAL OVERRIDE If your factory transmitter is lost, broken, or otherwise rendered inoperable your Security System can be disarmed without the use of the keychain transmitter .
128-8504 5 of 8 can start and operate your vehicle. The unit will allow three attempts to disarm via the manual override sequence. If the code is not successfully entered within the three attempts, disarming with the manual override switch will be locked for 10 minutes.
128-8504 6 of 8 Custom Code Programming Example: T o Change the code from the factory pre-assigned code of 1 1 to “52” you would do the following: 1. Disarm the system by use of the transmitter , or by use of the emergency override sequence. 2. Turn the ignition switch to the on position.
128-8504 7 of 8 to the on position and all vehicle doors are closed, the doors will lock in 4 seconds. Additionally, any time the ignition key is turned to the off position, the doors will unlock. ELIMINATING THE ARM / DISARM CHIRPS : The normal arming and disarming confirmation chirps can easily be turned off using the valet pushbutton switch.
128-8504 8 of 8 PRO 9233N SYSTEM FUNCTIONS A T A GLANCE PASSIVE ARMING ARMED DISARMED VALET MODE INTRUSION ZONE 3 INTRUSION ZONE 2 INTRUSION ZONE 1 ARM DISARM ARM / DOOR OPEN 10 MIN. PASSIVE ARM / DOOR OPEN DISARM / INTRUSION DISARM / AFTER 10 MIN. PASSIVE ARM DISARM / AFTER 10 MIN.
An important point after buying a device Audiovox PRO 9233N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO 9233N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO 9233N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO 9233N you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO 9233N will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO 9233N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO 9233N.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO 9233N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO 9233N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
