Instruction/ maintenance manual of the product PRO 9233 Audiovox
Go to page of 8
128-7777 1 of 8 1 Congratulations on your purchase of the PRO9233 automotive Keyless Entry Upgrade Alarm System. This system is a state - of - the - art auto security system that is designed to automatically arm and disarm when it receives a command from your existing Factory Keyless Entry Transmitter.
128-7777 2 of 8 2 i s automatically ( passively ) arming. As an added convenience, the 30 second automatic passive arming will not begin until all doors are closed, allowing passen- gers t o exit the vehicle at their convenience.
128-7777 3 of 8 3 installed, the vehicle’s interior lights will turn on for 30 seconds, or until the ignition key is turned on. NOTE: I f your system has been programmed for “ passive arming “, then it will begin to re-arm immediately after disarming.
128-7777 4 of 8 4 TO ENTER THE V ALET MODE: 1. Disarm the unit by use of the factory transmitter or by use of the manual override sequence. 2. Turn the ignition switch to the “On” position. 3. Press and hold the valet/override pushbutton switch for 5 seconds.
128-7777 5 of 8 5 the manual override sequence. If the code is not successfully entered within the three attempts, disarming with the manual override switch will be locked for 10 minutes.
128-7777 6 of 8 6 Custom Code Programming Example: T o Change the code from the factory pre-assigned code of 1 1 to “52” you would do the following: 1. Disarm the system by use of the transmitter , or by use of the emergency override sequence. 2. Turn the ignition switch to the on position.
128-7777 7 of 8 7 To operate the optional accessory; 1. Press the lock, then unlock, then lock buttons on your keychain transmitter within 3 seconds. 2.
128-7777 8 of 8 8 PRO 9233 SYSTEM FUNCTIONS A T A GLANCE PASSIVE ARMING ARMED DISARMED VALET MODE INTRUSION ZONE 3 INTRUSION ZONE 2 INTRUSION ZONE 1 ARM DISARM ARM / DOOR OPEN 10 MIN. PASSIVE ARM / DOOR OPEN DISARM / INTRUSION DISARM / AFTER 10 MIN. PASSIVE ARM DISARM / AFTER 10 MIN.
An important point after buying a device Audiovox PRO 9233 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO 9233 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO 9233 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO 9233 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO 9233 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO 9233, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO 9233.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO 9233. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO 9233 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
