Instruction/ maintenance manual of the product PRO 2032 Audiovox
Go to page of 8
128-6132 1 OF 8 1 Congratulations on your purchase of the PRO 2032 automotive Keyless Entry Upgrade Alarm System. This system is a state-of-the-art auto security system that is designed to automatically arm and disarm when it receives a command from your existing Factory Keyless Entry Transmitter.
128-6132 2 OF 8 2 3. In 30 seconds, you will hear a single short chip from the siren and the vehicle’s parking lamps will flash one time, indicating that the system has ARMED. At this time, the red dash mounted LED will begin to flash slowly, providing a visual indication that the system is fully armed.
128-6132 3 OF 8 3 INTRUSION WARNING SIGNALS : The system will inform you if an intrusion attempt has occurred while you were away from the vehicle. If an intrusion attempt has occurred, the siren and or horn will beep four times when the system is disarmed.
128-6132 4 OF 8 4 MANUALL Y OVERRIDING YOUR SYSTEM USING THE V ALET SWITCH MANUAL OVERRIDE Y our Security System can be disarmed without the use of the keychain transmit- ter . This is necessary , since you will need the ability to operate your vehicle if the transmitter is lost or its battery fails.
128-6132 5 OF 8 5 NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code.
128-6132 6 OF 8 6 NOTE: If you have changed the programmed override code then substitute your new code tenths for step 2 above, and units for step 5 above.
128-6132 7 OF 8 7 PRO 2032 SYSTEM FUNCTIONS A T A GLANCE DASH LED INDICATORS RAPID FLASHING............................................................................. PASSIVE ARMING SLOW FLASHING......................................................
128-6132 8 OF 8 8 Audiovox Electronic Corp. 150 Marcus Blvd. Hauppauge, N.Y. 11788 128-6132.
An important point after buying a device Audiovox PRO 2032 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO 2032 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO 2032 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO 2032 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO 2032 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO 2032, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO 2032.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO 2032. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO 2032 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
