Instruction/ maintenance manual of the product XM610 Samson
Go to page of 24
Powered Mixers SIX CHANNEL POWERED MIXER WITH 24BIT DIGIT AL EFFECTS DSP 24 DIGIT AL EFFECT S BIT XM 610.
Safety Instructions/Consignes de sécurité/Sicherheitsvor kehrungen/Instr ucciones de seguridad ACHTUNG: Um die Gefahr eines Brandes oder Stromschlags zu verringern, soll- ten Sie dieses Gerät weder Regen noch Feuchtigkeit aussetzen.Um die Gefahr eines Stromschlags zu verringern, sollten Sie weder Deckel noch Rückwand des Geräts entfernen.
T able of Contents Introduction 2 XM610 Features 3 Controls and Functions Front Panel Layout 4 Front Panel Controls 5–9 XM610 Input and Output Connections 10–12 Operating the XM610 13–15 System Set-ups 16–17 XM610 Wiring Guide 18 Specifications 19 Block Diagram 20 Copyright 2004, Samson Technologies Corp.
2 XM610 F eatures The Samson XM610 Powered Mixer is a comprehensive, all-in-one mixer / power amplifier solution for live sound applications. Here are some of its main features: • Six channel powered mixer in ergonomically correct kickback enclosure allowing you to easily see and operate the front panel functions.
3 Congratulations on your purchase of the Samson XM610 powered mixer! The XM610 is a six channel, 600 W att powered mixer with a built-in, 24 BIT DSP (Digital Signal Processor) effects.
4 Controls and Functions FRONT P ANEL LA Y OUT.
5 Controls and Functions INPUT CHANNEL SECTION The following section details each part of the XM610’s INPUT CHANNELS including the 3-BAND EQ, the MONITOR and EFX sends, LEVEL and PAD controls.
6 SELECT - Digital Effects Select Switch The SELECT switch allows you to pick one of the 100 built-in digital effects. Simply rotate the SELECT to choose the effect. Effect PROGRAM List This section identifies the ten banks of built-in DSP effects presets.
7 PO WER AMP SECTION The XM610’s power amplifier section can be configured to operate several ways depending on whether you need MAIN plus MONITOR amplifiers to power your speak- ers, or if you just need more power for the MAIN speakers. The section below describes the XM610 power amp modes.
8 MAIN SECTION The XM610 has two internal power amplifiers and depending on the power amp MODE selection switch, the amplifiers are sent the MAIN or MONI- TOR bus signal. The following section describes the MAIN bus operation, which allows you to adjust the over-all tone and volume, and specify the mix level of the built-in effects.
MONITOR SECTION The XM610 has two internal power amplifiers and depending on the MODE selection switch, the ampli- fiers received their input signals from the MAIN or MONITOR bus. The following section describes the MONITOR bus operation, which allows you to adjust the overall tone and volume, and specify the mix level of the built-in effects.
10 XM610 Input and Output Connections CHANNEL 1–6 MIC and LINE INPUTS The XM610’s six input channels each have a LINE level, Hi-Z (High Impedance) input and a MIC level, Low-Z (Low impedance) input.
11 REC OUT - Record Output The signal present at this connector is the MAIN bus signal before it has passed through the MASTER level control and graphic equalizer.
12 SPEAKER CONNECTION The XM610’s power amplifier section can be configured to operate several ways depending on the setting of the power amp MODE switch located on the front panel. This allows you to choose whether you need MAIN plus MONITOR amplifiers to power your speakers, or if you just need more power for the MAIN speakers.
13 Operating the XM610 BASIC OPERA TION The following section explains the basic operation of the XM610. CONNECTING MICROPHONES AND INSTRUMENTS 1. Before connecting mics or instruments, make sure that the power of all your sys- tems components, including the XM610, is turned off.
14 Operating the XM610 USING THE DIGIT AL EFFECTS The XM610 features a built-in, high quality, 24 BIT Digital Signal Processor offering studio grade effects. The DSP features clean Delay, lush Reverbs and multi-effects like Chorus + Delay or Chorus + Reverb.
15 Operating the XM610 USING AN EXTERNAL EFFECT If you prefer to use an external device for effects process- ing, you can easily connect the unit using the XM610 EFX bus. Follow the simple steps below to interface your processor: 1. Set the MONITOR section VOLUME control to the "0" position.
16 XM610 Sy stem Set-Ups SIGNAL FLOW SIGNAL FLOW SIGNAL FLOW SIGNAL FLOW S A M S O N R 2 1 S A M S O N R 2 1 SIGNAL FLOW SIGNAL FLOW SAMSON TECHNOLOGIES CORP., HICKSVILLE, NEW YORK TO PREVENT SHOCK DO NOT OPEN. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
17 XM610 Sy stem Set-Ups This system shows the XM610 power amp oper- ating in MAIN/MONITOR mode, with two speak ers c onnected to POWER AMP 2 and two monitor speakers speak er con- nected to POWER AMP 1.
XM610 Wiring Guide Unbalanced 1/4” C onnector XLR Balanced W iring Guide CONNECTING THE XM610 The are several ways to interface the XM610 to support a variety of applications. The XM610 features balanced inputs and outputs, so connecting balanced and unbalanced signals is possible.
Specifications 19 SPECIFICATIONS Rated Output power 300W/4 Ω @0.1% THD at 1KHz per amplifier Frequency response 20Hz~20KHz+/-0.5dB@1W Output into 8 Ω (AMP OUT) 20 Hz~20KHz+/-0.4@+4dB Output into 10k Ω (MAIN OUT, MONITOR OUT, AUX 2 SEND) Total Harmonic Distortion Less than 0.
20 Block Diagram.
.
Samson T echnologies Corp. 575 Underhill Blvd. P .O. Box 9031 Syosset, NY 1 1791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 www .samsontech.
An important point after buying a device Samson XM610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samson XM610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samson XM610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samson XM610 you will learn all the available features of the product, as well as information on its operation. The information that you get Samson XM610 will certainly help you make a decision on the purchase.
If you already are a holder of Samson XM610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samson XM610.
However, one of the most important roles played by the user manual is to help in solving problems with Samson XM610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samson XM610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
