Instruction/ maintenance manual of the product S-direct Direct Box Samson
Go to page of 8
GND LIFT BALANCED OUTPUT PIN 1 GND PIN 2 HOT PIN 3 COLD BATTER Y MADE IN CHINA BATTER Y PHANTOM Direct Insertion Box www.samsontech.com LEVEL GTR/SPK DESIGNED AND ENGINEERED IN THE UNITED STA TES BY S.
-- T able O f C ontents Fr ont and Rear Panel L a yout 3 Po wering S direct 3 Operating the S direct Direct insertion of an instrument into a P A system 4 High power signals 5 Converting the output of unbalanced devices 6 Specifications 7 K-TEAM A P R O D U C T I O N Copyright 2002, Samson T echnologies Corp.
S direc t F ront and Rear Panel Layout www.samsontech.com LEVEL GTR/SPK DESIGNED AND ENGINEERED IN TH E UNITED STA TES BY SAMSON TECHNOLOGIES OUTPUT/LINK INPUT SD100 1 2 3 GND LIFT BALANCED OUTPUT PIN 1 GND PIN 2 HOT PIN 3 COLD BATTERY MADE IN CHINA BATTER Y PHANTOM 4 5 6 7 1 INPUT - 1/4” input connector .
Operating the S direct A direct box, or DI box, provides the facility for the direct insertion of an audio signal into a mixer or recorder . The S direct offers a variety of DI solutions for live sound and recording applications.
www.samsontech.com LEVEL GTR/SPK DESIGNED AND ENGINEERED IN THE UNITED STATES BY SAMSON TECHNOLOGIES OUTPUT/LINK INPUT SD100 2T IN 2T OUT 2T TO MI X CR MIX MONO OUT C/ROOM +PHONES 5 MIX/2T RIGHT RIGHT.
Con verting the Output of Unbalanced Devices The S direct can be quite useful on stage or in the studio for connecting unbalanced devices, particularly keyboards. The output levels of many keyboards are low , so their sig- nals can benefit greatly by connecting their unbalanced outputs to the S direct.
Frequency Response 5-35 kHz, -3 dB Noise Level (22-22kHz, Input Shorted) -104 dBu THD + N (10 Hz -22 kHz) 0.013% typ. @ 1 VRMS,1 kHz. Input Impedance (GTR) > 1 Meg. Ohm (SPK) 10 k Ohm Max. Input Level (1% THD) +8.1 dBu ( 9v . Batt.) +1 1.3 dBu (48v .
Samson T echnologies Corp. 575 Underhill Blvd. P .O. Box 9031 Syosset, NY 1 1791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 www .samsontech.
An important point after buying a device Samson S-direct Direct Box (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samson S-direct Direct Box yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samson S-direct Direct Box - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samson S-direct Direct Box you will learn all the available features of the product, as well as information on its operation. The information that you get Samson S-direct Direct Box will certainly help you make a decision on the purchase.
If you already are a holder of Samson S-direct Direct Box, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samson S-direct Direct Box.
However, one of the most important roles played by the user manual is to help in solving problems with Samson S-direct Direct Box. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samson S-direct Direct Box along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
