Instruction/ maintenance manual of the product RT80 Samson
Go to page of 16
® Ear Amp O WNERS MANU AL UHF WIRELESS IN EAR MONIT OR U .S. V ersion.
Produced by On The Right Wavelength for Samson Technologies Corp. Copyright 1999, Samson Technologies Corp. Printed October 1999 Samson Technologies Corp.
Introduction We know you don’t like reading owners manuals, but you’ve just purchased one of the most unique wireless audio products around, and we want to tell you about it! So, before you plug in and start making music, we’d like to suggest you take just a few moments out to scan these pages.
Wireless EarAmp® Sy stem F eatures The Samson Wireless EarAmp® system utilizes state-of-the-art technology in personal monitoring. Its main features include: • Excellent audio quality, with superior frequency response and low distortion. • An extraordinary degree of frequency agility.
QuickStar t If you’ve had some prior experience using wireless systems, these QuickStart instructions will get you up and running with your Wireless EarAmp® system in a matter of minutes! Detailed .
Guided T our - Wireless EarAmp® T ransmitter F ront P anel 4 1: Power switch - Use this to turn the main power on and off. When the transmitter is on, the display section (see #9 below) is lit.
Guided T our - Wireless EarAmp® T ransmitter Rear P anel 5 1: DC input - Connect the supplied power adapter here, using the strain relief as silkscreened on the rear panel. WARNING: The substitution of any other kind of power adapter can cause severe damage to the Wireless EarAmp ® transmitter and will void your warranty.
Guided T our - Wireless EarAmp® Receiver 6 1: Battery door release - Press this latch gently upwards in order to open the battery door and access the controls contained within. When closing the battery door, swing it gently upwards until you hear this latch click.
Guided T our - Wireless EarAmp® Receiver 7 10: Headphone jack - Connect the supplied stereo earbuds (or third-party earpieces — see Appendix D on page 13 in this manual for more information) to this standard 1/8" (3.5 mm) mini-phone jack in order to monitor the signal being output by the Wireless EarAmp ® .
Setting Up and Using The Wireless EarAmp® 8 Setting up your Wireless EarAmp ® is a simple procedure which takes only a few minutes: 1. Remove all packing materials (save them in case of need for fut.
Setting Up and Using The Wireless EarAmp® 9 8b. In the receiver, turn the Program switch off, then on (towards the “ up ” arrow) and then, within ten seconds, press and hold the transmitter ’ s.
Appendix A: Setting the Wireless EarAmp™ Radio F requency The Samson Wireless EarAmp ® is extraordinarily frequency-agile, offering more than 128 different radio frequencies and two different modes of operation.
11 Appendix B: Wireless EarAmp® Channel Plan Wireless EarAmp® Channel Plan: (All frequency values are in MHz) Channel Group Group Group Group Group Group Group Group 38 39 40 41 42 43 44 45 1 614.35 620.35 626.35 632.35 638.35 644.35 650.35 656.35 2 616.
Appendix C: Using 2 Ch Mode The Wireless EarAmp ®’ s unique dual mono “ 2 CH ” mode makes it possible for you to have direct control over the blend of two separate signals, simply by turning the Balance knob.
Appendix D: Using Third-P ar ty Ear pieces If you listen to the earbuds supplied with the Samson Wireless EarAmp ™ on their own, they may sound a little overbright to you.
14 Specifications SYSTEM Frequency Coverage 614 to 662 MHz Channels Available 128 (8 groups with 16 channels each) Direct frequency selection to nearest 25 kHz Channel Selection Transmitter: Front pan.
An important point after buying a device Samson RT80 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samson RT80 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samson RT80 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samson RT80 you will learn all the available features of the product, as well as information on its operation. The information that you get Samson RT80 will certainly help you make a decision on the purchase.
If you already are a holder of Samson RT80, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samson RT80.
However, one of the most important roles played by the user manual is to help in solving problems with Samson RT80. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samson RT80 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
